Objective: To explore the effect of different miniscrew placement heights on the distribution of biological forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization, to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments. Methods: Mimics, GeomagicStudio 2017, SolidWorks 2016, and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the following six working conditions: working condition 1 was the control group without miniscrews; working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm, 7 mm, 4 mm, and 1 mm from the top of the alveolar crest, respectively; working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane. Results: On the sagittal axis, miniscrew anchorage caused distal displacement of all teeth. Compared to the control group, in the miniscrew group, the displacement of the anterior molars exceeded that of the second molars. On the vertical axis, the result in the control group was similar to backward bending; the results in the miniscrew groups resembled the effect of a lever, lowering the lateral incisors and canines and raising the central incisors and first premolars. On the coronal axis, the second premolars and the first molars showed lingual displacement in the control group, and only the premolars and first molars showed lingual displacementin the miniscrew groups. The canines were the teeth that were most strongly affected by the change in miniscrew placement height. Conclusion The higher the miniscrew position is, the stronger the protective effect on the anterior anchorage. According to the miniscrew placement height, the mandibular arch should be properly narrowed, the central incisors and first premolars should be lowered, and the lateral incisors and canines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To investigate the therapeutic effect of self-made Bitong Ointment combined with umbilical dressing of traditional Chinese medicine in the treatment of children with pediatric allergic rhinitis differentiated as type of latent heat in the lung meridian. Methods Eighty children with allergic rhinitis differentiated as type of latent heat in the lung meridian were randomly divided into observation group and control group, with 40 cases in each group. The control group was treated with loratadine, while the observation group was additionally treated with self-made Bitong Ointment and umbilical dressing of traditional Chinese medicine. After 4 weeks of treatment, the clinical effect, TCM syndrome score, airway stress response, inflammatory factors, and therapeutic safety were evaluated. Results The total effective rate in the observation group was 95.00% (38/40), which was higher than 77.50% (31/40) in the control group. After treatment, the scores of main TCM syndromes such as frequent sneezing, clear and thin nasal discharge, decreased sense of smell, shortness of breath, and reluctance to speak in the observation group were lower than those in the control group. After treatment, the levels of indicators of airway stress response such as exhaled nitric oxide (FeNO), lipid peroxide (LHP) and inducible nitric oxide synthase (iNOS) in the observation group were lower than those in the control group. After treatment, the levels of inflammatory factors such as monocyte chemoattractant protein-4 (MCP-4), cysteinyl leukotriene receptor 1 (CysLTR1), and interleukin-9 (IL-9) in the observation group were significantly lower than those in the control group (P < 0.05). The incidence rate of adverse reactions during treatment was 15.00% (6/40) in the observation groupand 10.00% (4/40) in the control group, with no significant difference between the two groups (P>0.05). Conclusion The combination of self-made Bitong Ointment combined with umbilical dressing of traditional Chinese medicine is effective in the treatment of children with pediatric allergic rhinitis differentiated as type of latent heat in the lung meridian, which can improve the TCM syndromes, inhibit the airway stress response, reduce the expression levels of inflammatory factors, and has good therapeutic safety.