OBJECTIVE: To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application. METHODS: Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05). RESULTS: The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05). CONCLUSION The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.
Humans ; Silicon ; Materials Testing ; Friction ; Lithium ; Cicatrix ; Surface Properties ; Silicon Dioxide ; Zirconium/chemistry* ; Ceramics ; Dental Porcelain

Objective: To evaluate the effect of shear bond strength between resin cement and zirconia using SiO₂-ZrO₂ slurry coating. Methods: One hundred and forty pre-sintered zirconia discs were randomly divided into seven groups (n=20) according to the surface treatments: AS (as-sintered), SB (sand blasting with Al₂O₃), 2SiO₂-1ZrO₂ (2∶1 mole ratio SiO₂-ZrO₂ coating), 1SiO₂-1ZrO₂ (mole ratio 1∶1 SiO₂-ZrO₂ coating), 1SiO₂-2ZrO₂ (mole ratio 1∶2 SiO₂-ZrO₂ coating), 1SiO₂-3ZrO₂ (mole ratio 1∶3 SiO₂-ZrO₂ coating), 1SiO₂-4ZrO₂ (mole ratio 1∶4 SiO₂-ZrO₂ coating). Each zirconia disc was bonded to composite resin cylinder using resin cement. All specimens were stored in distilled water (37 ℃, 24 h). Each group was divided into two subgroups in which half specimens were tested using universal testing machine and another half specimens accepted artificial aging of 5 000 times thermocycling then tested. Scaning electron microscopy (SEM) was used to observe the micro-morphology of coating surface etched by hydrofluoric acid,then the coating thickness was measured. Results: Before artificial aging, 1SiO₂-1ZrO₂ showed a higher shear bond strength [(41.69±6.28) MPa] than all the other group (P<0.05). 1SiO₂-2ZrO₂ gained a higher strength than AS, SB, 1SiO₂-3ZrO₂ and 1SiO₂-4ZrO₂ (P<0.05). However, 1SiO₂-2ZrO₂ did not get a significant higher shear bond strength than 2SiO₂-1ZrO₂ (P>0.05). No significant differences were found among SB, 2SiO₂-1ZrO₂ and 1SiO₂-3ZrO₂ (P>0.05). After artificial aging, shear bond strength of all groups were decreased significantly besides 2SiO₂-1ZrO₂. 2SiO₂-1ZrO₂, 1SiO₂-1ZrO₂ and 1SiO₂-2ZrO₂ [(24.13±5.50), (22.28±4.40), (23.11±4.80) MPa] showed higher shear bond strength than SB and 1SiO₂-3ZrO₂ (P<0.05),no intergroup differences were observed (P>0.05). Shear bond strength of AS and 1SiO₂-4ZrO₂ fell to 0 MPa approximately. The SEM images of etched coating surface showed contraction fissure due to different thermal expansion coefficient between SiO₂ and ZrO₂ and intercrystal pores of zirconia. The thickness of coating was measured to be less than 30 μm. Conclusions: Mole ratio 1∶1 SiO₂-1ZrO₂ slurry coating showed the highest shear bond strength of resin cement to zirconia.
Dental Bonding ; Materials Testing ; Resin Cements/chemistry* ; Silicon Dioxide ; Surface Properties ; Zirconium

The chemical constituents in Urtica dioica fruits were investigated by silica gel chromatography, preparative HPLC, NMR, and HR-MS for the first time. As a result, 21 compounds were isolated from the fruits of U. dioica and identified 7R,8S,8'R-olivil(1), oleic acid(2), α-linoleic acid(3), palmic acid(4), methyl palmitate(5), α-linolenic acid(6), α-linolenic acid methyl ester(7), 5-O-caffeoyl-shikimic acid(8), vanillic acid(9), p-coumaric acid(10), 5-O-p-coumaroylshikimic acid(11), cinnamic acid(12), quinic acid(13), shikimic acid(14), ethyl caffeate(15), coniferyl ferulate(16), ferulic acid(17), caffeic acid(18), chlorogenic acid(19), pinoresinol(20), and quercetin(21). Compound 1 was a new compound and compounds 2-16 were isolated from U. dioica for the first time.
Chlorogenic Acid ; Fruit ; Linoleic Acid ; Oleic Acid ; Quercetin/chemistry* ; Quinic Acid ; Shikimic Acid ; Silicon Dioxide ; Urtica dioica/chemistry* ; Vanillic Acid ; alpha-Linolenic Acid

OBJECTIVETo study the effects of Astragalus polysaccharide (APS), the primary effective component of the Chinese herb medicine Astragalus membranaceus (frequently used for its anti-hepatic fibrosis effects), on nanoscale mechanical properties of liver sinusoidal endothelial cells (SECs).

METHODSUsing endothelial cell medium as the control, 5 experimental groups were established utilizing different concentrations of APS, i.e. 12.5, 25, 50, 100, and 200 μg/mL. By using atomic force microscopy along with a microcantilever modified with a silicon dioxide microsphere as powerful tools, the value of Young's modulus in each group was calculated. SAS 9.1 software was applied to analyze the values of Young's modulus at the pressed depth of 300 nm. Environmental scanning electron microscopy was performed to observe the surface microtopography of the SECs.

RESULTSThe value of Young's modulus in each APS experimental group was significantly greater than that of the control group: as APS concentration increased, the value of Young's modulus presented as an increasing trend. The difference between the low-concentration (12.5 and 25 μg/mL) and high-concentration (200 μg/mL) groups was statistically significant (P<0.05), but no significant differences were observed between moderateconcentration (50 and 100 μg/mL) groups versus low- or high-concentration groups (P>0.05). Surface topography demonstrated that APS was capable of increasing the total area of fenestrae.

CONCLUSIONSThe values of Young's modulus increased along with increasing concentrations of APS, suggesting that the stiffness of SECs increases gradually as a function of APS concentration. The observed changes in SEC mechanical properties may provide a new avenue for mechanistic research of anti-hepatic fibrosis treatments in Chinese medicine.

Animals ; Astragalus Plant ; chemistry ; Biomechanical Phenomena ; drug effects ; Elastic Modulus ; Endothelial Cells ; cytology ; ultrastructure ; Liver ; cytology ; Microscopy, Atomic Force ; Microspheres ; Nanotechnology ; Polysaccharides ; pharmacology ; Rats ; Silicon Dioxide ; chemistry ; Surface Properties

OBJECTIVEThe effect of the silica nanoparticles (SNs) on lungs injury in rats was investigated to evaluate the toxicity and possible mechanisms for SNs.

METHODSMale Wistar rats were instilled intratracheally with 1 mL of saline containing 6.25, 12.5, and 25.0 mg of SNs or 25.0 mg of microscale SiO2 particles suspensions for 30 d, were then sacrificed. Histopathological and ultrastructural change in lungs, and chemical components in the urine excretions were investigated by light microscope, TEM and EDS. MDA, NO and hydroxyproline (Hyp) in lung homogenates were quantified by spectrophotometry. Contents of TNF-α, TGF-β1, IL-1β, and MMP-2 in lung tissue were determined by immunohistochemistry staining.

RESULTSThere is massive excretion of Si substance in urine. The SNs lead pulmonary lesions of rise in lung/body coefficients, lung inflammation, damaged alveoli, granuloma nodules formation, and collagen metabolized perturbation, and lung tissue damage is milder than those of microscale SiO2 particles. The SNs also cause increase lipid peroxidation and high expression of cytokines.

CONCLUSIONThe SNs result into pulmonary fibrosis by means of increase lipid peroxidation and high expression of cytokines. Milder effect of the SNs on pulmonary fibrosis comparing to microscale SiO2 particles is contributed to its elimination from urine due to their ultrafine particle size.

Air Pollutants ; toxicity ; Animals ; Dose-Response Relationship, Drug ; Lung ; drug effects ; pathology ; ultrastructure ; Male ; Microscopy, Electron, Transmission ; Nanoparticles ; toxicity ; Pulmonary Fibrosis ; chemically induced ; metabolism ; pathology ; Random Allocation ; Rats ; Rats, Wistar ; Silicon Dioxide ; toxicity ; Specific Pathogen-Free Organisms ; Spectrometry, X-Ray Emission ; Urine ; chemistry

OBJECTIVETo investigate the effect of short and long term exposure to SiO2 nanoparticles on microRNA expression level in human bronchial epithelial cells(16HBE cells).

METHODSThe 16HBE cells were exposed to 5, 10, 15, 20, 25, 30 and 40 μg/ml SiO2 nanoparticles for 24 h to detect the cell viability by using CCK-8 assay. The inhibition rate of proliferation activity and half inhibitory concentration (IC50) were calculated. The 16HBE cells were exposed to 10 μg/ml SiO2 nanoparticles for 10 and 30 generations, named P10 and P30, and the control P0 was set. The cells were treated with SiO2 nanoparticles at 0, 1/4 IC50, 1/2 IC50 and IC50 concentration and μm-SiO2 at IC50 concentration for 24 h, and the control serum-free culture medium was set. Agilent miRNAs microarray chip was used to screen differentially expressed miRNAs in P10, P30 and P0 groups. The expression level of miRNA was detected by reverse transcription fluorescence quantitative polymerase chain reaction (qRT-PCR).

RESULTSThe inhibition rate of proliferation activity of 5, 10, 15, 20, 25,30,40 μg/ml group were (-3.33 ± 3.80)%, (20.40 ± 11.73)%, (39.08 ± 5.53)%, (55.10 ± 5.78)%, (66.42 ± 9.60)%, (71.67 ± 7.34)%, (81.43 ± 5.37)%, respectively; F=129.11, P<0.001. The IC50 (95%CI) was 18.35 (15.82-20.72) μg/ml. The expression level of miRNA-494-3p in P0, P10 and P30 were 1.00, 0.45 ± 0.08, 0.28 ± 0.07, respectively; F=60.77, P<0.001. miRNA-19a-3p were 1.00, 2.27 ± 0.45, 1.06 ± 0.19, respectively; F=30.05, P<0.001. miRNA-148b-3p were 1.00, 1.78 ± 0.29, 0.88 ± 0.19, respectively; F=30.23, P<0.001. Compared to control group, the expression level of miRNA-494-3p in 5, 10, 20 μg/ml SiO2 nanoparticles groups and 20 μg/ml μm-SiO2 group were 0.99 ± 0.04, 1.38 ± 0.19, 2.13 ± 0.14, 0.81 ± 0.25, respectively; F=57.03, P<0.001. miRNA-19a-3p were 0.91 ± 0.03, 1.12 ± 0.03, 0.53 ± 0.01, 0.86 ± 0.01, respectively; F=408.78, P<0.001. miRNA-148b-3p were 0.95 ± 0.02, 1.22 ± 0.00, 0.54 ± 0.02, 1.15 ± 0.04 respectively; F=264.14, P<0.001.

CONCLUSIONShort and long term exposure to SiO2 nanoparticles can affect the expression level of miRNAs in 16HBE cells. The expressions of miRNA-494-3p after long and short period exposure are different.

Cells, Cultured ; Epithelial Cells ; drug effects ; metabolism ; Humans ; MicroRNAs ; metabolism ; Nanoparticles ; chemistry ; Oligonucleotide Array Sequence Analysis ; Silicon Dioxide ; chemistry

Silica nanoparticles (SNPs) are widely used in many scientific and industrial fields despite the lack of proper evaluation of their potential toxicity. This study examined the effects of acute exposure to SNPs, either alone or in conjunction with ovalbumin (OVA), by studying the respiratory systems in exposed mouse models. Three types of SNPs were used: spherical SNPs (S-SNPs), mesoporous SNPs (M-SNPs), and PEGylated SNPs (P-SNPs). In the acute SNP exposure model performed, 6-week-old BALB/c female mice were intranasally inoculated with SNPs for 3 consecutive days. In the OVA/SNPs asthma model, the mice were sensitized two times via the peritoneal route with OVA. Additionally, the mice endured OVA with or without SNP challenges intranasally. Acute SNP exposure induced significant airway inflammation and airway hyper-responsiveness, particularly in the S-SNP group. In OVA/SNPs asthma models, OVA with SNP-treated group showed significant airway inflammation, more than those treated with only OVA and without SNPs. In these models, the P-SNP group induced lower levels of inflammation on airways than both the S-SNP or M-SNP groups. Interleukin (IL)-5, IL-13, IL-1beta and interferon-gamma levels correlated with airway inflammation in the tested models, without statistical significance. In the mouse models studied, increased airway inflammation was associated with acute SNPs exposure, whether exposed solely to SNPs or SNPs in conjunction with OVA. P-SNPs appear to be relatively safer for clinical use than S-SNPs and M-SNPs, as determined by lower observed toxicity and airway system inflammation.
Animals ; Asthma/*chemically induced/pathology ; Female ; Inflammation/*chemically induced/pathology ; Interferon-gamma/analysis ; Interleukins/analysis ; Lung/drug effects/*pathology ; Mice, Inbred BALB C ; Nanoparticles/*adverse effects/chemistry ; Ovalbumin/adverse effects ; Polyethylene Glycols/adverse effects/chemistry ; Silicon Dioxide/*adverse effects/chemistry ; Surface Properties

This paper is to prepare curcumin (Cur) loaded mesoporous silica nanoparticle (Cur-MSN), evaluate its release behavior and anti-cancer activity in vitro. Mesoporous silica nanoparticle (MSN) was prepared by polymerization method and Cur-MSN was obtained using solvent evaporation method and impregnation centrifugation method. The preparation method was optimized using entrapment efficiency (EE) and loading efficiency (LE) as indexes. Cur-MSN was characterized with scanning electron microscope and its particle size and zeta potential were determined. Finally, in vitro release behavior in 0.2% SDS solution and its cell-killing effect on HeLa cells were also evaluated. The Cur-MSN prepared with process optimization method was round and uniform and exhibited typical mesoporous characterization. The mean particle size and Zeta potential of Cur-MSN were 75.8 nm and -30.1 mV, respectively. EE and LE of three batches of Cur-MSN were (72.55 ± 2.01)% and (16.21 ± 1.12)%, respectively. In vitro release behavior of Cur-MSN showed a sustained release profile with 83.5% cumulative release within 96 h. The killing effect of Cur-MSN on HeLa cells was dose-dependent with IC50 of 19.40 mg x L(-1), which was similar to that of Cur.
Antineoplastic Agents, Phytogenic ; chemistry ; pharmacology ; Curcumin ; chemistry ; pharmacology ; Drug Carriers ; chemistry ; Drugs, Chinese Herbal ; chemistry ; pharmacology ; Humans ; Nanoparticles ; chemistry ; Neoplasms ; drug therapy ; Particle Size ; Porosity ; Silicon Dioxide ; chemistry

1,3,5-Trimethylbenzene (1,3,5-TMB) was used as the pore-enlarging modifier to expand the pore size of MCM-41 (mobil company of matter) mesoporous silica nanoparticles. The solvent impregnation method was adopted to assemble non-water-soluble β-carotene into the pore channel of MCM-41. The MCM-41 and drug assemblies were characterized by TEM, FT-IR, elemental analysis and N2 adsorption-desorption. The results showed that MCM-41 has good sphericity and regular pore structure. The research also investigated the optimal loading time, the drug loading and the vitro stability of the β-carotene. As a drug carrier, the modified MCM-41 showing a shorter drug loading time, the drug loading as high as 85.58% and the stability of β-carotene in drug assemblies has improved. The study of this new formulation provides a new way for β-carotene application.
Drug Carriers ; chemistry ; Drug Delivery Systems ; Drug Stability ; Nanoparticles ; chemistry ; Silicon Dioxide ; chemistry ; beta Carotene ; chemistry ; pharmacology

Currently, chemotherapy is one of the main therapy for cancer. But the traditional antitumor drugs are systemic distribution in vivo, they are difficult to achieve an effective drug concentration in the tumor tissue and don't have the ability to distinguish normal cells and tumor cells by themselves, that cause systemic toxicity easily and can not meet the clinical needs. With the research on mesoporous silica nanoparticles (MSNs) deepening, more and more attention in the drug delivery system have been payed to in recent years, because of its unique physicochemical structure characteristics, it has the effect on specific targets, directly inhibits the tumor cell growth, reduces the side effects to normal cells, tissues and organs and can be long-term medication, etc. It is expected to be excellent carriers of antitumor drugs. MSNs application in the field of cancer treatment has now become a hot research field of medicine. In this paper, the latest research about MSNs in antitumor drugs targeting delivery system from 2008 to 2015 is summarized, including the application of MSNs separately in antitumor drug targeting, passive targeting, active targeting, physical or chemical conditions response targeting and other compound targeting drug delivery system. We expect it to provide a reference to the toxicity reducing and efficacy enhancing and further development of chemical medicine, natural medicine and monomeric compound of chinese herbal medicine.
Animals ; Antineoplastic Agents ; chemistry ; pharmacology ; Drug Delivery Systems ; methods ; trends ; Humans ; Nanoparticles ; chemistry ; Neoplasms ; drug therapy ; Silicon Dioxide ; chemistry