Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Purpose: The optimal reconstruction method following distal gastrectomy has not been elucidated. Since Billroth-II (B-II) reconstruction is commonly associated with increased bile reflux, Braun jejunojejunostomy has been proposed to reduce this complication. Materials and Methods: We retrospectively analyzed 325 patients with gastric cancer who underwent distal gastrectomy with B-II reconstruction between January 2015 and December 2017, comprising 159 patients without Braun anastomosis and 166 with Braun anastomosis.Outcomes were assessed over three years using annual gastroscopy based on the residual food, gastritis, and bile reflux criteria and the Los Angeles classification for reflux esophagitis. Results: In the first postoperative year, the group with Braun anastomosis showed a significant reduction in bile reflux compared to the group without Braun anastomosis (75.9% vs. 86.2%; P=0.019). Moreover, multivariate analysis identified Braun anastomosis as the sole factor associated with this outcome. Additionally, the group with Braun anastomosis had a lower incidence of heartburn (12.0% vs. 20.1%; P=0.047) and reduced use of prokinetics (P<0.001) and acid reducers (P=0.002) compared to the group without Braun anastomosis.However, these benefits diminished in subsequent years, with no significant differences in residual food, gastritis, or reflux esophagitis between the groups. Both groups showed similar body mass index scores and nutritional outcomes over the 3-year follow-up period. Conclusions Although Braun anastomosis offers short-term benefits in reducing bile reflux after B-II reconstruction, these effects are not sustainable. The routine use of Braun anastomosis should be reconsidered, though either approach remains a viable option depending on the patient’s circumstances.

Purpose: The optimal reconstruction method following distal gastrectomy has not been elucidated. Since Billroth-II (B-II) reconstruction is commonly associated with increased bile reflux, Braun jejunojejunostomy has been proposed to reduce this complication. Materials and Methods: We retrospectively analyzed 325 patients with gastric cancer who underwent distal gastrectomy with B-II reconstruction between January 2015 and December 2017, comprising 159 patients without Braun anastomosis and 166 with Braun anastomosis.Outcomes were assessed over three years using annual gastroscopy based on the residual food, gastritis, and bile reflux criteria and the Los Angeles classification for reflux esophagitis. Results: In the first postoperative year, the group with Braun anastomosis showed a significant reduction in bile reflux compared to the group without Braun anastomosis (75.9% vs. 86.2%; P=0.019). Moreover, multivariate analysis identified Braun anastomosis as the sole factor associated with this outcome. Additionally, the group with Braun anastomosis had a lower incidence of heartburn (12.0% vs. 20.1%; P=0.047) and reduced use of prokinetics (P<0.001) and acid reducers (P=0.002) compared to the group without Braun anastomosis.However, these benefits diminished in subsequent years, with no significant differences in residual food, gastritis, or reflux esophagitis between the groups. Both groups showed similar body mass index scores and nutritional outcomes over the 3-year follow-up period. Conclusions Although Braun anastomosis offers short-term benefits in reducing bile reflux after B-II reconstruction, these effects are not sustainable. The routine use of Braun anastomosis should be reconsidered, though either approach remains a viable option depending on the patient’s circumstances.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: The optimal reconstruction method following distal gastrectomy has not been elucidated. Since Billroth-II (B-II) reconstruction is commonly associated with increased bile reflux, Braun jejunojejunostomy has been proposed to reduce this complication. Materials and Methods: We retrospectively analyzed 325 patients with gastric cancer who underwent distal gastrectomy with B-II reconstruction between January 2015 and December 2017, comprising 159 patients without Braun anastomosis and 166 with Braun anastomosis.Outcomes were assessed over three years using annual gastroscopy based on the residual food, gastritis, and bile reflux criteria and the Los Angeles classification for reflux esophagitis. Results: In the first postoperative year, the group with Braun anastomosis showed a significant reduction in bile reflux compared to the group without Braun anastomosis (75.9% vs. 86.2%; P=0.019). Moreover, multivariate analysis identified Braun anastomosis as the sole factor associated with this outcome. Additionally, the group with Braun anastomosis had a lower incidence of heartburn (12.0% vs. 20.1%; P=0.047) and reduced use of prokinetics (P<0.001) and acid reducers (P=0.002) compared to the group without Braun anastomosis.However, these benefits diminished in subsequent years, with no significant differences in residual food, gastritis, or reflux esophagitis between the groups. Both groups showed similar body mass index scores and nutritional outcomes over the 3-year follow-up period. Conclusions Although Braun anastomosis offers short-term benefits in reducing bile reflux after B-II reconstruction, these effects are not sustainable. The routine use of Braun anastomosis should be reconsidered, though either approach remains a viable option depending on the patient’s circumstances.