Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background/Aims: Drug-eluting balloons (DEBs) represent a novel therapeutic approach for patients with small coronary artery disease. However, further studies are needed to compare the clinical efficacy of DEBs versus drug-eluting stents (DESs). Methods: In total, 492 patients (age, 67.9 ± 11.0 years; 339 men) with small coronary artery lesions (diameter < 2.75 mm) were randomly assigned to group I (DEB) (n = 104; age, 67.2 ± 10.7 years; 83 men) and group II (DES) (n = 388; age, 68.0 ± 11.1 years; 254 men). For inverse probability of treatment weighting (IPTW) analysis, the study population was stratified into groups I (n = 269) and II (n = 280). We compared the incidences of major adverse cardiac events (MACE) between the two groups during 12 months of clinical follow-up. Results: Group I had shorter device lengths (22.4 ± 5.8 mm) compared with group II (27.4 ± 9.3 mm; p < 0.001). Additionally, devices in group I were smaller in diameter (2.4 ± 0.1 mm) compared with those in group II (2.6 ± 0.1 mm; p < 0.001). Left ventricular ejection fraction (LVEF) was lower in group I (53.8% ± 12.6%) than in group II (58.6% ± 11.9%; p < 0.001). After IPTW, no significant differences in LVEF were observed between groups I and II. During 12 months of follow-up, the incidence of total MACE did not differ between the two groups. Conclusions No significant differences were observed in clinical efficacy between DEB and DES for the treatment of small coronary artery disease. Therefore, DEB can be considered a viable alternative to DES in patients with small coronary artery disease.

Background/Aims: Drug-eluting balloons (DEBs) represent a novel therapeutic approach for patients with small coronary artery disease. However, further studies are needed to compare the clinical efficacy of DEBs versus drug-eluting stents (DESs). Methods: In total, 492 patients (age, 67.9 ± 11.0 years; 339 men) with small coronary artery lesions (diameter < 2.75 mm) were randomly assigned to group I (DEB) (n = 104; age, 67.2 ± 10.7 years; 83 men) and group II (DES) (n = 388; age, 68.0 ± 11.1 years; 254 men). For inverse probability of treatment weighting (IPTW) analysis, the study population was stratified into groups I (n = 269) and II (n = 280). We compared the incidences of major adverse cardiac events (MACE) between the two groups during 12 months of clinical follow-up. Results: Group I had shorter device lengths (22.4 ± 5.8 mm) compared with group II (27.4 ± 9.3 mm; p < 0.001). Additionally, devices in group I were smaller in diameter (2.4 ± 0.1 mm) compared with those in group II (2.6 ± 0.1 mm; p < 0.001). Left ventricular ejection fraction (LVEF) was lower in group I (53.8% ± 12.6%) than in group II (58.6% ± 11.9%; p < 0.001). After IPTW, no significant differences in LVEF were observed between groups I and II. During 12 months of follow-up, the incidence of total MACE did not differ between the two groups. Conclusions No significant differences were observed in clinical efficacy between DEB and DES for the treatment of small coronary artery disease. Therefore, DEB can be considered a viable alternative to DES in patients with small coronary artery disease.