OBJECTIVE To investigate the mechanism of Xihuang pill （XHP） against diffuse large B-cell lymphoma （DLBCL）. METHODS The active ingredients of XHP and potential therapeutic targets for DLBCL were identified using TCMSP， GeneCards and DisGeNET databases. Protein-protein interaction networks were constructed using the String database and Cytoscape software to screen core components and core targets. Gene ontology and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses were then performed. The clinical relevance of core targets was analyzed using the GEPIA and PanCanSurvPlot databases. Molecular docking and molecular dynamics （MD） simulation were conducted to verify the interactions between core components and core targets， and the binding free energy was calculated using the molecular mechanics Poisson-Boltzmann surface area （MM-PBSA） method. The effects of XHP on DLBCL and the related molecular mechanisms were validated using CCK-8 assay， flow cytometry and Western blot. RESULTS Network pharmacology analysis identified 108 active ingredients of XHP and 410 potential therapeutic targets for DLBCL. Six core components （e.g.， 17 beta-estradiol， quercetin） and ten core targets [e.g.， tumor protein 53 （TP53）， proto-oncogene tyrosine-protein kinase Src （SRC）] were obtained. Enrichment analysis indicated that the anti-DLBCL effects of XHP were primarily associated with the apoptotic signaling pathway， the phosphoinositide 3-kinase （PI3K）/protein kinase B （Akt） signaling pathway and so on. Clinical correlation analysis revealed that TP53 and SRC expression were significantly up-regulated in DLBCL tissues and associated with poor patient prognosis （P＜0.05）. Molecular docking， MD simulations and MM-PBSA calculations confirmed that the SRC-quercetin complex had a mail：stronger and more stable binding affinity. In vitro experiments demonstrated that XHP concentration-dependently inhibited the proliferation of DLBCL cells； compared with control group， XHP medium- and high-dose groups could significantly induce the apoptosis of SU-DHL2 and SU-DHL4 cells， and significantly down- regulated the expressions of SRC protein， phosphorylated （p）-PI3K/PI3K and p-Akt/Akt in SU-DHL4 cells （P＜0.05）. CONCLUSIONS XHP may inhibit the proliferation and induce the apoptosis of DLBCL cells by regulating the SRC/PI3K/Akt signaling pathway.

Objective: To explore the association of physical activity and sugar sweetened beverage consumption with psychological sub health among middle school students in Bao an District, Shenzhen, so as to provide a reference for adolescent mental health promotion. Methods: A questionnaire survey was conducted in November 2024 by a stratified cluster random sampling method to select 6 926 junior and senior middle school students from 5 middle schools in Shenzhen. The questionnaire from Youth Risk Behavior Surveillance System was used to assess the consumption of sugar sweetened beverages, and physical activity Rating Scale was used to assess the level of physical activity, and Brief Instrument on Psychological Health of Youths was used to evaluate the psychological sub health status. The Chi -square test was used to analyze the differences in the detection rates of psychological sub health among different groups of middle school students, and a multivariate Logistic regression model was established to analyze the effects of physical activity and sugar sweetened beverage consumption and their combined effects on the psychological sub health of middle school students. Results: The detection rate of psychological sub health among middle school students in Bao an District, Shenzhen was 18.93%. Multivariate Logistic regression analysis showed that, after controlling for confounding factors such as gender, school stage, family residence, family economic status, parental literacy, academic stress and number of friends, lack of physical activity or excessive sugar sweetened beverage consumption were associated with increased risks of psychological sub health among middle school students ( OR =1.36, 1.45); and the highest risk of psychological sub health was found in middle school students who were lack of physical activity and excessive sugar sweetened beverage consumption ( OR =2.59) ( P <0.01). Further analysis by school stages showed that junior high school students with sufficient physical activity and excessive intake of sugary drinks ( ROR =2.10), lack of physical activity and excessive intake of sugary drinks ( ROR =2.31) were at higher risks of psychological sub health than senior high school students( P <0.05). Conclusions Insufficient physical activity and excessive sugar sweetened beverage consumption are closely associated with an increased risk of psychological sub health among middle school students. Effective interventions should be targeted to reduce the risk of psychological sub health problems among middle school students.

Insufficient alveolar bone thickness increases the risk of periodontal dehiscence and fenestration, especially in orthodontic tooth movement. Abaloparatide (ABL), a synthetic analog of human PTHrP (1-34) and a clinical medication for treating osteoporosis, has recently demonstrated its potential in enhancing craniofacial bone formation. Herein, we show that intraoral submucosal injection of ABL, when combined with mechanical force, promotes in situ alveolar bone thickening. The newly formed bone is primarily located outside the original compact bone, implying its origin from the periosteum. RNA sequencing of the alveolar bone tissue revealed that the focal adhesion (FA) pathway potentially mediates this bioprocess. Local injection of ABL alone enhances cell proliferation, collagen synthesis, and phosphorylation of focal adhesion kinase (FAK) in the alveolar periosteum; when ABL is combined with mechanical force, the FAK expression is upregulated, in line with the accomplishment of the ossification. In vitro, ABL enhances proliferation, migration, and FAK phosphorylation in periosteal stem cells. Furthermore, the pro-osteogenic effects of ABL on alveolar bone are entirely blocked when FAK activity is inhibited by a specific inhibitor. In summary, abaloparatide combined with mechanical force promotes alveolar bone formation via FAK-mediated periosteal osteogenesis. Thus, we have introduced a promising therapeutic approach for drug-induced in situ alveolar bone augmentation, which may prevent or repair the detrimental periodontal dehiscence, holding significant potential in dentistry.
Osteogenesis/drug effects* ; Periosteum/cytology* ; Parathyroid Hormone-Related Protein/administration & dosage* ; Animals ; Focal Adhesion Protein-Tyrosine Kinases/metabolism* ; Alveolar Process/drug effects* ; Cell Proliferation/drug effects* ; Phosphorylation ; Rats ; Male ; Humans ; Focal Adhesion Kinase 1/metabolism* ; Cell Movement/drug effects*

Ursodeoxycholic acid (UDCA) is a naturally occurring, low-toxicity, and hydrophilic bile acid (BA) in the human body that is converted by intestinal flora using primary BA. Solute carrier family 7 member 11 (SLC7A11) functions to uptake extracellular cystine in exchange for glutamate, and is highly expressed in a variety of human cancers. Retroperitoneal liposarcoma (RLPS) refers to liposarcoma originating from the retroperitoneal area. Lipidomics analysis revealed that UDCA was one of the most significantly downregulated metabolites in sera of RLPS patients compared with healthy subjects. The augmentation of UDCA concentration (≥25 μg/mL) demonstrated a suppressive effect on the proliferation of liposarcoma cells. [¹⁵N₂]-cystine and [¹³C₅]-glutamine isotope tracing revealed that UDCA impairs cystine uptake and glutathione (GSH) synthesis. Mechanistically, UDCA binds to the cystine transporter SLC7A11 to inhibit cystine uptake and impair GSH de novo synthesis, leading to reactive oxygen species (ROS) accumulation and mitochondrial oxidative damage. Furthermore, UDCA can promote the anti-cancer effects of ferroptosis inducers (Erastin, RSL3), the murine double minute 2 (MDM2) inhibitors (Nutlin 3a, RG7112), cyclin dependent kinase 4 (CDK4) inhibitor (Abemaciclib), and glutaminase inhibitor (CB839). Together, UDCA functions as a cystine exchange factor that binds to SLC7A11 for antitumor activity, and SLC7A11 is not only a new transporter for BA but also a clinically applicable target for UDCA. More importantly, in combination with other antitumor chemotherapy or physiotherapy treatments, UDCA may provide effective and promising treatment strategies for RLPS or other types of tumors in a ROS-dependent manner.

OBJECTIVES: This study aims to use 3D prin-ting technology based on the principle of stereo lithography apparatus (SLA) to shape dental lithium disilicate ceramics and study the effects of different slurry proportions on the microstructure and properties of heat-treated samples. METHODS: The experimental group comprised lithium disilicate ceramics manufactured through SLA 3D printing, and the control group comprised lithium disilicate ceramics (IPS e.max CAD) fabricated through commercial milling. An array of different particle sizes of lithium disilicate ceramic powder materials (nano and micron) was selected for mixing with photocurable acrylate resin. The proportion of experimental raw materials was adjusted to prepare five groups of ceramic slurries for 3D printing (Groups S1-S5) on the basis of rheological properties, stability, and other factors. Printing, debonding, and sintering were conducted on the experimental group with the optimal ratio, followed by measurements of microstructure, crystallographic information, shrinkage, and mechanical properties. RESULTS: Five groups of lithium disilicate ceramic slurries were prepared, of which two groups with high solid content (75%) (Groups S2 and S3) were selected for 3D printing. X-ray diffraction and scanning electron microscopy results showed that lithium disilicate was the main crystalline phase in Groups S2 and S3, and its microstructure was slender, uniform, and compact. The average grain sizes of Groups S2 and S3 were (559.79±84.58) nm and (388.26±61.49) nm, respectively (P<0.05). Energy spectroscopy revealed that the samples in the two groups contained a high proportion of Si and O elements. After heat treatment, the shrinkage rate of the two groups of ceramic samples was 18.00%-20.71%. Test results revealed no statistical difference in all mechanical properties between Groups S2 and S3 (P>0.05). The flexural strengths of Groups S2 and S3 were (231.79±21.71) MPa and (214.86±46.64) MPa, respectively, which were lower than that of the IPS e.max CAD group (P<0.05). The elasticity modulus of Groups S2 and S3 were (87.40±12.99) GPa and (92.87±19.76) GPa, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). The Vickers hardness values of Groups S2 and S3 were (6.53±0.19) GPa and (6.25±0.12) GPa, respectively, which were higher than that of the IPS e.max CAD group (P<0.05). The fracture toughness values of Groups S2 and S3 were (1.57±0.28) MPa·m^0.5 and (1.38±0.17) MPa·m^0.5, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). CONCLUSIONS The combination of lithium disilicate ceramic powders with different particle sizes can yield a slurry with high solid content (75%) and suitable viscosity and stability. The dental lithium disilicate ceramic material is successfully prepared by using 3D printing technology. The 3D-printed samples show a small shrinkage rate after heat treatment. Their microstructure conforms to the crystal phase of lithium disilicate ceramics, and their mechanical properties are close to those of milled lithium disilicate ceramics.
Printing, Three-Dimensional ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Materials Testing ; Particle Size

Objective:A genome-wide molecular characterization of FJ21351116, a strain of G3P[8]-E2 2021 collected in Fujian, China, was performed.Methods:Whole genome sequencing of FJ21351116 was performed using a high-sensitivity group A rotavirus whole genome sequencing method. Genomic characteriza-tion of the virus was assessed by nucleic acid sequence analysis using MEGA 11.0, Geneious 9.0.2 and DNASTAR software. Neutralization epitopes of VP7 and VP4 (VP8*) were analyzed using BioEdit v. 7.0.9.0 and PyMOL v. 2.5.2.Results:In this study, FJ21351116 was shown to be a G3-P[8]-I2-R2-C2-M2-A2-N2-T2-E2-H2 genotype, and the result of phylogenetic tree showed that the VP7, VP4, VP3, and NSP2-NSP5 genes of the FJ21351116 strain were related to the equine-like DS-1-like G3P[8] genes that have been detected in Japan in recent years. VP6, VP1, VP2, and NSP1 genes are closely related to G2P[4] in most countries, especially in Singapore, suggesting that this strain was formed by genetic reassortment during the evolution of equine-like G3P[8] and G2P[4]. Evolutionary relationships between the VP7/VP4 genes of FJ21351116 and Rotarix and RotaTeq vaccines suggest that the multiple mutations in both VP7 and VP4 (VP8*) neutralizing antigenic epitopes and vaccine amino acid sites. It is hypothesized that the Rotarix and RotaTeq vaccines may be less effective against equine DS-1-like G3P[8] RVA, and the sequence differences with Rotarix are higher than those with RotaTeq.Conclusions:In this study, we found a rare case of DS-1-like G3P [8] RVA strain in China. Currently, horse-like DS-1-like G3P [8] RVA is relatively rare in China and may be poorly protected by vaccine strains, emphasizing the importance of continuous monitoring of RVA strains and the development of efficient and full-coverage RVA vaccines.

Rotavirus is one of the most common pathogens causing severe gastroenteritis in children under 5 years of age in the world. RV vaccination is the most effective measure to control rotavirus diarrhea in infants. The immune effect of RV vaccine is different in countries with different income levels. In this study, the factors affecting the immune effect of RV vaccine are systematically expounded, which provides reference for the research of RV vaccine and the formulation of immune strategy.

Objective:Explore the predictive value of the C-reactive protein to albumin ratio (CAR) and combined indicators for the prognosis of cardiac arrest (CA) patients.Methods:Retrospective analysis was conducted on patients who recovered spontaneous circulation after cardiopulmonary resuscitation (CPR) admitted to the First Affiliated Hospital of Zhengzhou University from January 2021 to May 2023. Patients were divided into survival and non-survival groups based on their status at discharge. Baseline characteristics, CPR data, and laboratory indicators were compared between the two groups. Statistically significant indicators were further analyzed using multivariate logistic regression to identify independent risk factors affecting the prognosis of CA patients. Receiver operating characteristic (ROC) curves were constructed to assess the predictive value of each independent factor and combined indicators for the prognosis of CA patients.Results:A total of 145 patients were included in the study, including 33 patients in the survival group and 112 patients in the non-survival group. There were statistically significant differences between the survival group and the non-survival group in terms of CPR duration, the dosage of vasopressor drugs used, ICU length of stay, Acute Physiology and Chronic Health EvaluationⅡ (APACHEⅡ) score at ICU admission, lactate, fibrinogen, aspartate aminotransferase, albumin, procalcitonin, C-reactive protein, CAR, myoglobin, and creatine kinase isoenzyme (all P < 0.05). Multivariate logistic regression analysis revealed that CAR and CPR duration were independent risk factors affecting the prognosis of CA patients (CAR: OR=2.372, 95% CI: 1.094~5.146, P=0.029; CPR duration: OR=1.170, 95% CI: 1.020~1.342, P=0.025). ROC curve analysis showed that the areas under the curve for CAR, CPR duration, and their combination in predicting patient prognosis were 0.792, 0.731, and 0.859, respectively. The cut-off values for CAR and CPR duration were 1.455 and 11.5 minutes, respectively. Conclusions:The CAR and CPR duration are independent risk factors affecting the prognosis of CA patients, and the predictive value is higher when both CAR and CPR duration are combined. A CAR greater than 1.455 and a CPR duration longer than 11.5 minutes suggest a poorer prognosis for the patients.

Objective To investigate the mechanism by which Erastin affects ferroptosis in lung fibroblasts.Meth-ods Mouse lung fibroblasts (C57/B6-L) were treated with varying concentrations of the iron death inducer Eras-tin.Cell viability was assessed using the cell counting Kit-8 (CCK-8) assay.Oxidative stress levels were visualized using a fluorescence microscope, and the expression of proteins related to the mitogen-activated protein kinase (MAPK) signaling pathway was analyzed using Western blot.Additionally, the p38 and extracellular regulated protein kinase (ERK) inhibitors SB203580 and U0126 were employed to further elucidate the mechanism by which Erastin induces iron death in lung fibroblasts.Results At a concentration of 100 μmol/L, Erastin effectively in-duced ferroptosis in lung fibroblasts, leading to an upregulation of oxidative stress.Furthermore, the phosphoryla-tion levels of p38 and ERK proteins in the MAPK pathway were elevated (P<0.05) .The addition of SB203580 and U0126 inhibitors resulted in a significant reduction in oxidative stress levels and a notable increased in cell ac-tivity in lung fibroblasts (P<0.05).Conclusion It can be concluded that Erastin induces ferroptosis in lung fi-broblasts, potentially through the mediation of oxidative stress via the MAPK signaling pathway.

Objective:To analyze the clinical characteristics of patients undergoing extracorporeal cardiopulmonary resuscitation (ECPR), and to explore the risk factors leading to poor prognosis.Methods:The clinical data of 95 patients with ECPR admitted to the First Affiliated Hospital of Zhengzhou University from January 2020 to May 2023 were retrospectively analyzed. According to the survival status at the time of discharge, the patients were divided into the survival group and death group. The difference of clinical data between the two groups was compared to explore the risk factors related to death and poor prognosis. Risk factors associated with death were identified by Binary Logistic regression analysis. Results:A total of 95 patients with ECPR were included in this study, 62 (65.3%) died and 33 (34.7%) survived at discharge. Patients in the death group had longer low blood flow time [40 (30, 52.5) min vs. 30 (24.5, 40) min ] and total cardiac arrest time[40 (30, 52.5) min vs. 30(24.5, 40) min], shorter total hospital stay [3 (2, 7.25) d vs. 19 (13.5, 31) d] and extracorporeal membrane oxygenation (ECMO) assisted time [26.5 (17, 50) h vs. 62 (44, 80.5) h], and more IHCA patients (56.5% vs. 33.3%) and less had spontaneous rhythm recovery before ECMO (37.1% vs. 84.8%). Initial lactate value [(14.008 ± 5.188) mmol/L vs.(11.23 ± 4.718) mmol/L], APACHEⅡ score [(30.10 ± 7.45) vs. (25.88 ± 7.68)] and SOFA score [12 (10.75, 16) vs. 10 (9.5, 13)] were higher ( P< 0.05). Conclusions:No spontaneous rhythm recovery before ECMO, high initial lactic acid and high SOFA score are independent risk factors for poor prognosis in ECPR patients.