Objective:To investigate whether long non-coding RNA(lncRNA) AW112010 can improve insulin resistance in aging adipocytes through the miR-204/POU2F2 signaling pathway.Methods:In vivo experiment: C57BL/6 mice were divided into young control group(4 months old) and aging model group(18 months old) based on body weight. The expression levels of AW112010, miR-204-5p, POU2F2, aging related indicators(p16, p21), and insulin signaling pathway genes [insulin receptor(INSR), insulin receptor substrate 1(IRS1), phosphatidylinositol kinase(PI3K), protein kinase B(AKT)] in epididymal adipose tissue were detected using real-time fluorescence quantitative PCR(RT-qPCR) and Western blotting. In vitro experiment: Using adriamycin(ADR) to induce 3T3-L1 aging adipocyte model, β-gal staining was used to observe cellular senescence, and miR-204 inhibitor and miR-204 mimic small interfering RNA were successfully constructed and transfected into 3T3-L1 adipocytes. Results:RT-qPCR and Western blot results showed that compared with the young group, the expression of AW112010 in the adipose tissue of aging mice was increased, while the expression of miR-204-5p was decreased. The expressions of POU2F2, p16, and p21 in the adipose tissue of aging mice were increased, while the expressions of INSR, IRS1, PI3K, GLUT4 mRNA and protein were decreased. The β-gal stainging results showed that the number of 3T3-L1 senescent adipocytes induced by ADR was significantly increased, and the expression levels of AW112010, POU2F2, p16, and p21 in ADR-induced senescent adipocytes were increased compared with the control group, while the expression levels of miR-204-5p, INSR, IRS1, PI3K, GLUT4 were decreased, and remaining glucose in the culture medium was increased. Compared with control, overexpression of miR-204 resulted in decreased expressions of aging indicators p16, p21, and target gene POU2F2 while the expressions of INSR and GLUT4 were increased.Conclusion:Upregulation of lncRNA AW112010 in adipocytes of aging mice may induce insulin resistance by targeting miR-204-5p/POU2F2/IRS1.

ObjectiveTo investigate the effect and mechanism of total saponins from Panax japonicus （TSPJ） on white adipose tissue （WAT） browning/brown adipose tissue （BAT） activation in C57BL6/J male mice fed on a high-fat diet （HFD）. MethodThirty-two C57BL6/J male mice （8-week-old） were randomly divided into a normal group， a model group， a low-dose TSPJ group， and a high-dose TSPJ group. The mice in the low-dose and high-dose TSPJ groups were given TSPJ for four months by gavage at 25， 75 mg·kg^-1·d^-1， respectively， and those in the other groups were given 0.5% sodium carboxymethyl cellulose （CMC-Na） accordingly. After four months of feeding， all mice were placed at 4 ℃ for acute cold exposure， and the core body temperature was monitored. Subsequently， all mice were sacrificed， and BAT and inguinal WAT （iWAT） were separated rapidly to detect the corresponding indexes. Hematoxylin-eosin （HE） staining was used to observe the morphological changes in each group. The effect of TSPJ on the mRNA expression of uncoupling protein 1 （UCP1）， fatty acid-binding protein 4 （FABP4）， cytochrome C （CytC）， PR domain-containing protein 16 （PRDM16）， elongation of very long chain fatty acids protein 3 （ELOVL3）， peroxisome proliferator-activated receptor γ （PPARγ）， and peroxisome proliferator-activated receptor-γ coactivator-1α （PGC-1α） in iWAT and BAT was detected by Real-time polymerase chain reaction （Real-time PCR）. Western blot was also used to detect the protein expression of UCP1， PRDM16， PPARγ， and PGC-1α in BAT and iWAT of each group. The effect of TSPJ on UCP1 expression in BAT and iWAT was detected by immunohistochemistry. Result① Compared with the model group， TSPJ could decrease the body weight and proportions of iWAT and BAT in the HFD-induced mice （P<0.05， P<0.01）. ② The body temperature of mice in the model group decreased compared with that in the normal group in the acute cold exposure tolerance test （P<0.05）. The body temperature in the high-dose TSPJ group increased compared with that in the model group （P<0.01）. ③ Compared with the normal group， the model group showed increased adipocyte diameter in iWAT and BAT and decreased number of adipocytes per unit area. Compared with the model group， the TSPJ groups showed significantly reduced cell diameter and increased number of cells per unit area， especially in the high-dose TSPJ group. ④ Compared with the normal group， the model group showed decreased mRNA expression of FABP4， UCP1， CytC， PRDM16， ELOVL3， PGC-1α， and PPARγ in adipose tissues of mice （P<0.05， P<0.01）. Compared with the model group， after intervention with TSPJ， the mRNA expression was significantly up-regulated （P<0.05， P<0.01）. ⑤ Compared with the normal group， the model group showed decreased protein expression of UCP1， PRDM16， PPARγ， and PGC-1α in adipose tissues of mice （P<0.05， P<0.01）. Compared with the model group， after intervention with TSPJ， the protein expression increased significantly （P<0.05， P<0.01）. ConclusionTSPJ could induce the browning of iWAT/BAT activation and enhance adaptive thermogenesis in obese mice induced by HFD. The underlying mechanism may be attributed to the activation of the PPARγ/PGC-1α signaling pathway.

Background: Genetic defects in the human thyroid-stimulating hormone (TSH) receptor (TSHR) gene can cause congenital hypothyroidism (CH). However, the biological functions and comprehensive genotype–phenotype relationships for most TSHR variants associated with CH remain unexplored. We aimed to identify TSHR variants in Chinese patients with CH, analyze the functions of the variants, and explore the relationships between TSHR genotypes and clinical phenotypes. Methods: In total, 367 patients with CH were recruited for TSHR variant screening using whole-exome sequencing. The effects of the variants were evaluated by in-silico programs such as SIFT and polyphen2. Furthermore, these variants were transfected into 293T cells to detect their Gs/cyclic AMP and Gq/11 signaling activity. Results: Among the 367 patients with CH, 17 TSHR variants, including three novel variants, were identified in 45 patients, and 18 patients carried biallelic TSHR variants. In vitro experiments showed that 10 variants were associated with Gs/cyclic AMP and Gq/11 signaling pathway impairment to varying degrees. Patients with TSHR biallelic variants had lower serum TSH levels and higher free triiodothyronine and thyroxine levels at diagnosis than those with DUOX2 biallelic variants. Conclusions We found a high frequency of TSHR variants in Chinese patients with CH (12.3%), and 4.9% of cases were caused by TSHR biallelic variants. Ten variants were identified as loss-of-function variants. The data suggest that the clinical phenotype of CH patients caused by TSHR biallelic variants is relatively mild. Our study expands the TSHR variant spectrum and provides further evidence for the elucidation of the genetic etiology of CH.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

Objective Establish a standardized evaluation system for medical faults,and provide theoretical basis for medical institutions and related industries to evaluate the illegality of medical behaviors.Methods Based on a litera-ture review,the medical fault assessment system was initially constructed,and then a research group was estab-lished to use Delphi method to invite 31 experts to evaluate the importance and feasibility of each article of the medi-cal fault assessment system and put forward suggestions for modification.Results The effective recovery rates of the two rounds of expert consultation were 83.9％and 96.8％,the expert authority coefficient was 0.902 and 0.887,and the Kendall's W test of all levels differences were statistically significant(P＜0.001).The medical fault assess-ment system finally constructed includes 5 first-level items including practicing medicine according to law,informed notification,diagnosis and treatment technology,medical record documents and hospital management,as well as 10 second-level items,20 third-level items and 47 fourth-level items.The mean values of importance and feasibili-ty scores of all articles were greater than 4,standard deviations were less than 1,and coefficients of variation were less than 0.2.Conclusion The medical fault standardized evaluation system is scientific,reliable,innovative and appli-cable.

ObjectiveTo investigate the menstrual conditions of women infected with COVID-19 in Shanghai and analyze the influencing factors. MethodsFrom December 2022 to March 2023， menstrual data from 281 women infected with COVID-19 in Shanghai were collected with a questionnaire survey， including usual menstrual characteristics， the most recent menstrual period post-infection， symptoms of infection， and medication usage. According to the crossover period between the menstrual period and the infection period of the respondents， the samples were divided into two groups for comparative analysis： those whose menstrual and infection periods overlapped （positive group） and those whose menstruation started after conversion to virus-negative （negative conversion group）. ResultsAmong the 281 respondents， 196 （65.8%） experienced menstrual changes. Among them， 145 （51.6%） had changes in menstrual volume， color and texture， and 109 （38.8%） had changes in menstrual duration or cycle. Decreased menstrual volume （22.1%）， darker color （23.49%）， thicker texture （21.0%）， increased blood clots （16.7%）， and prolonged duration （21.8%） were observed in both groups. The rate of changes in menstrual volume， color， and texture was higher in the positive group （56.8%， 69/110） than that in negative group （37.3%， 76/171） （P<0.05）. Regarding the menstrual cycle changes， the rate of early onset was higher in the positive group （14.5%） compared to the negative conversion group （3.5%）（P<0.05）， while the rate of delayed menstruation was higher in the negative conversion group （25.1%） than that in the positive group （5.5%） （P<0.05）. Correlation analysis showed a weak association between sore throat and menstrual changes （r=0.154， P<0.05）. ConclusionSome women infected with COVID-19 experience short-term changes in their menstrual conditions， characterized by reduced volume， darker color， thick texture， increased clots， and prolonged menstrual duration， reflecting a pathogenesis of blood stasis. Menstruation during the infection period tends to occur earlier， while delayed menstruation is more prevalent at post-conversion.