At present, the negative impact caused by white pollution has spread to all aspects of human society economy, ecosystem, and health, which causes severe challenges for developing the circular bioeconomy. As the largest plastic production and consumption country in the world, China has shouldered an important responsibility in plastic pollution control. In this context, this paper analyzed the relevant strategies of plastic degradation and recycling in the United States, Europe, Japan and China, measured the literature and patents in this field, analyzed the status quo of technology from the perspective of research and development trends, major countries, major institutions, and discussed the opportunities and challenges faced by the development of plastic degradation and recycling in China. Finally, we put forward future development suggestions which include the integration of policy system, technology path, industry development and public cognition.
Humans ; Plastics ; Ecosystem ; Environmental Pollution ; Recycling ; Policy

Plastics are widely used in daily life. Due to poor management and disposal, about 80% of plastic wastes were buried in landfills and eventually became land and ocean waste, causing serious environmental pollution. Recycling plastics is a desirable approach, but not applicable for most of the plastic waste. Microbial degradation offers an environmentally friendly way to degrade the plastic wastes, and this review summarizes the potential microbes, enzymes, and the underpinning mechanisms for degrading six most commonly used plastics including polyethylene terephthalate, polyethylene, polyvinyl chloride, polypropylene, polystyrene and polyurethane. The challenges and future perspectives on microbial degradation of plastics were proposed.
Biodegradation, Environmental ; Plastics ; Polyurethanes ; Recycling

Post-traumatic soft tissue defects sometimes require sequential flap coverage to achieve complete healing. In the era of propeller flaps, which were developed to reduce donor site morbidity, Feng et al. introduced the concept of the free-style puzzle flap, in which a previously harvested flap becomes its own donor site by recycling the perforator. However, when a perforator cannot be found with a Doppler device, we suggest performing a new type of flap, the flip-flap puzzle flap, which combines two concepts: the free-style puzzle flap and the flip-flap flap described by Voche et al. in the 1990s. We present the cases of three patients who achieved complete healing through this procedure.
Extremities ; Humans ; Perforator Flap ; Reconstructive Surgical Procedures ; Recycling ; Soft Tissue Injuries ; Surgical Flaps ; Tissue Donors

Primary cilia and autophagy are two distinct nutrient-sensing machineries required for maintaining intracellular energy homeostasis, either via signal transduction or recycling of macromolecules from cargo breakdown, respectively. Potential correlations between primary cilia and autophagy have been recently suggested and their relationship may increase our understanding of the pathogenesis of human diseases, including ciliopathies and cancer. In this review, we cover the current issues concerning the bidirectional interaction between primary cilia and autophagy and discuss its role in cancer with cilia defect.
Autophagy ; Cilia ; Homeostasis ; Humans ; Recycling ; Signal Transduction

Although the rare earth elements (REEs) recycling industry is expected to increase worldwide in high-tech industry, regulations for worker safety have yet to be established. This study was conducted to understand the potential hazard/risk of REE recycling and to support the establishment of regulations or standards. We review the extensive literature on the toxicology, occupational safety, and health issues, and epidemiological surveys related to the REEs, and propose suitable management measures. REE recycling has four key steps such as collection, dismantling, separation, and processing. In these processes, hazardous substances, such as REEs-containing dust, metals, and chemicals, were used or occurred, including the risk of ignition and explosion, and the workers can be easily exposed to them. In addition, skin irritation and toxicities for respiratory, nervous, and cardiovascular systems with the liver toxicity were reported; however, more supplementary data are needed, owing to incompleteness. Therefore, monitoring systems concerning health, environmental impacts, and safety need to be established, based on additional research studies. It is also necessary to develop innovative and environment-friendly recycling technologies, analytical methods, and biomarkers with government support. Through these efforts, the occupational safety and health status will be improved, along with the establishment of advanced REE recycling industry.
Biomarkers ; Cardiovascular System ; Dust ; Environmental Health ; Explosions ; Hazardous Substances ; Liver ; Metals ; Occupational Health ; Recycling ; Skin ; Social Control, Formal ; Toxicology

This study examined the effect of 12-week intensive dietary and exercise intervention program on body composition and stress-related hormones in obese women and to examine the residual effect after the intervention. The participants of this study were 30 obese women who had a body mass index of over 25 kg/m² and over 30% in body fat. They were classified into 2 groups depending on the history of weight cycling (WC); the WC group (≥±5% of the original body weight) and the non-weight cycling (NWC) group. Both groups were subject to a nutritional intervention program every 2 weeks with a mandatory exercise intervention for 12 weeks. Thereafter, the nutrition/exercise interventions were ceased for 12 weeks, after which the participants' levels of the hormones relating to energy metabolism and stress, meal intakes, dietary habits, level of knowledge on sodium intake, frequency of sodium intake, and quality of life (QOL) were checked. The changes of body weight were 71.3 ± 5.5 kg (week 0) vs. 65.0 ± 6.6 kg (week 12) vs. 65.6 ± 7.1 kg (week 24) in WC group and 71.6 ± 8.6 kg (week 0) vs. 68.8 ± 9.7 kg (week 12) vs. 70.3 ± 9.4 kg (week 24) in the NWC group. The levels of hormones, meal intakes, and QOL scores were better in the WC group, as adherence to the nutritional intervention was higher. We suggest that that adherence to dietary habits heavily influences weight loss and maintenance in individuals who frequently attempt to lose weight and consequently go through a vicious cycle of weight recycling.
Adipose Tissue ; Body Composition ; Body Mass Index ; Body Weight ; Energy Metabolism ; Female ; Food Habits ; Humans ; Meals ; Obesity ; Quality of Life ; Recycling ; Sodium ; Weight Loss*

OBJECTIVE: The aim of this study was to compare recycled and unused orthodontic miniscrews to determine the feasibility of reuse. The comparisons included both miniscrews with machined surfaces (MS), and those with etched surfaces (ES). METHODS: Retrieved MS and ES were further divided into three subgroups according to the assigned recycling procedure: group A, air-water spray; group B, mechanical cleaning; and group C, mechanical and chemical cleaning. Unused screws were used as controls. Scanning electron microscopy, energy-dispersive X-ray spectrometry, insertion time and maximum insertion torque measurements in artificial bone, and biological responses in the form of periotest values (PTV), bone–implant contact ratio (BIC), and bone volume ratio (BV) were assessed. RESULTS: Morphological changes after recycling mainly occurred at the screw tip, and the cortical bone penetration success rate of recycled screws was lower than that of unused screws. Retrieved ES needed more thorough cleaning than retrieved MS to produce a surface composition similar to that of unused screws. There were no significant differences in PTV or BIC between recycled and unused screws, while the BV of the former was significantly lower than that of the latter (p < 0.05). CONCLUSIONS: These results indicate that reuse of recycled orthodontic miniscrews may not be feasible from the biomechanical aspect.
Microscopy, Electron, Scanning ; Recycling* ; Spectrum Analysis ; Torque

No abstract available.
Microscopy, Electron, Scanning ; Recycling* ; Spectrum Analysis ; Torque ; Sample Size ; Research Design ; Cortical Bone

One-third of all hospital-regulated medical waste (RMW) comes from the operating room (OR), and it considerably consists of disposable packaging and wrapping materials for the sterilization of surgical instruments. This study sought to identify the amount and type of waste produced by ORs in order to reduce the RMW so as to achieve environmentally-friendly waste management in the OR. We performed an initial waste segregation of 4 total knee replacement arthroplasties (TKRAs) and 1 total hip replacement arthroplasty, and later of 1 extra TKRA, 1 laparoscopic anterior resection of the colon, and 1 pelviscopy (with radical vaginal hysterectomy), performed at our OR. The total mass of non-regulated medical waste (non-RMW) and blue wrap amounted to 30.5 kg (24.9%), and that of RMW to 92.1 kg (75.1%). In the course of the study, we noted that the non-RMW included recyclables, such as papers, plastics, cardboards, and various wrapping materials. The study showed that a reduction in RMW generation can be achieved through the systematic segregation of OR waste.
Arthroplasty ; Arthroplasty, Replacement, Hip ; Arthroplasty, Replacement, Knee ; Colon ; Medical Waste* ; Operating Rooms* ; Plastics ; Product Packaging ; Recycling ; Sterilization ; Surgical Instruments ; Waste Management

Plagiarism may take place in any scientific journals despite currently employed anti-plagiarism tools. The absence of widely acceptable definitions of research misconduct and reliance solely on similarity checks do not allow journal editors to prevent most complex cases of recycling of scientific information and wasteful, or ‘predatory,’ publishing. This article analyses Scopus-based publication activity and evidence on poor writing, lack of related training, emerging anti-plagiarism strategies, and new forms of massive wasting of resources by publishing largely recycled items, which evade the ‘red flags’ of similarity checks. In some non-Anglophone countries ‘copy-and-paste’ writing still plagues pre- and postgraduate education. Poor research management, absence of courses on publication ethics, and limited access to quality sources confound plagiarism as a cross-cultural and multidisciplinary phenomenon. Over the past decade, the advent of anti-plagiarism software checks has helped uncover elementary forms of textual recycling across journals. But such a tool alone proves inefficient for preventing complex forms of plagiarism. Recent mass retractions of plagiarized articles by reputable open-access journals point to critical deficiencies of current anti-plagiarism software that do not recognize manipulative paraphrasing and editing. Manipulative editing also finds its way to predatory journals, ignoring the adherence to publication ethics and accommodating nonsense plagiarized items. The evolving preventive strategies are increasingly relying on intelligent (semantic) digital technologies, comprehensively evaluating texts, keywords, graphics, and reference lists. It is the right time to enforce adherence to global editorial guidance and implement a comprehensive anti-plagiarism strategy by helping all stakeholders of scholarly communication.
Education* ; Ethics ; Information Storage and Retrieval ; Plagiarism* ; Publications ; Recycling ; Retraction of Publication as Topic ; Scientific Misconduct ; Writing