BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

AIM: To explore the clinical effect of small incision lenticule extraction(SMILE)on the treatment of myopic anisometropia.METHODS: Clinical data of 76 patients(146 eyes)with myopic anisometropia who received SMILE or femtosecond assisted laser in situ keratomileusis(FS-LASIK)in our hospital from January 2021 to December 2022 were retrospectively analyzed. The patients were divided into SMILE group(39 cases, 77 eyes)and FS-LASIK group(37 cases, 69 eyes)according to surgical methods. Uncorrected visual acuity(UCVA), diopter, anisometropia, corneal aberration and occurrence of postoperative complications were compared between the two groups at 1 wk, 1 and 3 mo after surgery.RESULTS: The UCVA of the two groups was improved after surgery compared with that before surgery, and the coma, trefoil, spherical aberration and total higher-order aberration were significantly increased compared to those before surgery(P<0.05), and the coma, trefoil, spherical aberration and total higher-order aberration in the FS-LASIK group were significantly higher than those in the SMILE group(P<0.05). After follow-up to 3 mo after surgery, the incidence of postoperative complications was significantly lower in the SMILE group than that in the FS-LASIK group(5.2% vs 15.9%, P<0.05).CONCLUSION: Both SMILE and FS-LASIK can effectively enhance the UCVA and improve the visual quality in patients with myopic anisometropia, but SMILE has lower corneal higher order aberrations, lower incidence of postoperative complications and better overall effect.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

BACKGROUND:Bone tissue defects are one of the most common diseases in orthopedics,and the current treatments for this disease are inadequate.The development of tissue engineering brings new hope for bone defect repair:by regulating the release of bioactive substances and the process of vascularization and neurogenesis at the defect site,it can effectively improve the microenvironment of bone tissue and promote osseointegration,which is the most promising research idea for large-size bone defect repair. OBJECTIVE:To explore the research progress of regulating bone microenvironment changes in bone defect repair in recent years from the effects of bioactive substances,vascularization and neurotization on three aspects of bone microenvironment changes,and to provide new ideas and strategies for the treatment of large-size bone defects. METHODS:The search terms"bone tissue engineering,angiogenesis,neurotization,cytokines,bone morphogenetic protein,vascular endothelial growth factor,neuropeptides,bone microenvironment"in Chinese and English were used to search for articles on the influence of changes in the bone microenvironment and their application in bone tissue engineering published from January 1,2001 to December 31,2022 on CNKI,WanFang,Web of Science,Science Direct,and PubMed.Finally,109 articles were included for review. RESULTS AND CONCLUSION:(1)The bone microenvironment is essential for the induction of bone tissue stem cell growth and differentiation,and mainly consists of the extracellular matrix of the bone tissue seeds and the biochemical factors required for intercellular interactions,the local blood circulation network and the surrounding nerve tissue.(2)Bone defect repair is a continuous process divided into multiple phases that overlap and are mediated by multiple cytokines,and the same cytokine can have mutually synergistic or antagonistic effects in one or more healing phases.(3)Neovascular regeneration is key to initiating bone repair,as neovascularisation not only provides essential nutrients,osteoblasts and growth factors for bone repair,but is also a gateway for repair cells to enter the injury zone.(4)In addition to regulating the type,dose and timeliness of vascular-inducing factor release to achieve blood transport reconstruction.The study of differential release delivery systems of multiple factors and the application of gene transfer technology will be the future research direction to solve large bone defects.(5)Neuropeptides can bind to relevant receptors and act on specific signaling pathways to guide vascular growth and influence bone healing,bone regeneration and the balance between osteogenesis and osteolysis through a variety of pathways.(6)In the establishment of neuralized tissue-engineered bone,the role of changes in the bone tissue microenvironment and neuromodulation is bidirectional.Cytokines in the bone matrix can participate in neuronal signaling pathways through the blood-nerve barrier.Neuropeptides secreted by glial cells act on the bone microenvironment,affecting bone healing,bone regeneration and the balance between osteogenesis and osteolysis.(7)There are still many questions regarding the regulation of the bone microenvironment by bioactive substances and the processes of vascularization and neurogenesis,such as the rapid diffusion and degradation of cytokines in the body and their loss of activity,the temporal and spatial distribution of angiogenesis-related growth factors,and the establishment of neurogenesis through the body's feedback regulatory mechanism,which need to be improved by subsequent studies.

BACKGROUND:Although the clinical application of Masquelet technology has achieved extensive success,the research on optimizing all aspects of Masquelet technology is still being carried out.The focus of doctors is to speed up bone healing and shorten bone healing time after bone grafting. OBJECTIVE:To observe the effect of calcium phosphate combined with recombinant human bone morphogenetic protein-2 in repairing tibial infectious bone defects. METHODS:Thirty-one patients with tibial infectious bone defects were selected from The People's Hospital of Jianyang City from June 2017 to June 2022.They were treated with the Masquelet membrane induction technique.During the second stage of operation,they were divided into a control group(n=15)and a study group(n=16)according to different bone graft materials.Patients in the control group were implanted with autologous bone/allogeneic bone particles,and those in the study group were implanted with calcium phosphate combined with recombinant human bone morphogenetic protein-2/autologous bone particles.Six months after the second stage operation,peripheral blood inflammatory indexes such as white blood cell count,C-reactive protein,and erythrocyte sedimentation rate were detected.Imaging bone healing time,bone healing X-ray score,bone defect healing classification,and adjacent joint function were recorded.The presence of nail track infection,implant absorption,pain,and infection in the bone extraction area were observed. RESULTS AND CONCLUSION:(1)White blood cell count,erythrocyte sedimentation rate,and C-reactive protein levels of the two groups 6 months after the second stage operation were significantly lower than those before the first stage operation(P<0.05).There was no significant difference in each index between the two groups(P>0.05).(2)Bone healing time in the study group was shorter than that in the control group(P<0.05).(3)The Samantha X-ray score of the study group 6 months after the second stage operation was higher than that of the control group(P<0.05).The excellent and good rate of bone defect healing and adjacent joint function of the study group was higher than that of the control group(P<0.05).There was no significant difference in the recurrence rate and complication rate between the two groups(P>0.05).(4)These findings indicate that the effect of calcium phosphate combined with recombinant human bone morphogenetic protein-2 during the second stage operation of the Masquelet membrane induction technique in the treatment of tibial infectious bone defect is good and safe.