Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

To revise GBZ 188 Technical Specification for Occupational Health Surveillance based on national laws, regulations, standards, specifications and legal documents of occupational disease, and combination with the actual situation in China. The main modifications are as follows: the occupational health surveillance for workers exposed to toluene (xylene may implement by reference), bromopropane, methyl iodide, ethylene oxide, chloroacetic acid, indium and its compounds, coal tar, coal tarasphalt, asphalt, β-naphthylamine, dust of metal and its compounds(tin, iron, antimony, barium and its compounds), hard metal dust, erionite dust, low temperature, laser, tick-borne encephalitis virus, Borrelia burgdorferi, and human immunodeficiency virus, for scraper or grind operators, and underground workers using squatting or kneeling position, crawling position, side-lying position, or shoulder position for a long period of time are included. The emergency health screening for workers exposed to arsenic, fluorine and its inorganic compounds, and acrylamide are included. The occupational medical examination (OME) for workers exposed to amino and nitro compounds of benzene, phosgene, monomethylamine, organic fluorine and dimethyl sulfate has been adjusted and made mandatory, with corresponding assessments required upon leaving the job. The special occupational health surveillance for workers exposed to mycobacterium tuberculosis and hepatitis virus is removed. The OME conclusion of reexamination is removed, and standardize recheck/additional inspection requirements. The optional items in OME performed before, during and after leaving post are removed, but the optional items in emergency medical examination are retained. Additional OME items are added. The Guideline for OME Summary Reports is added as informative appendix, and so on. The revised GBZ 188 Technical Specification for Occupational Health Surveillance is more scientific and practical.

Objective:To explore the mediating effect of nurses' presenteeism behavior between job alienation and job burnout.Methods:From May 2019 to October 2021, a total of 506 nurses working in the Nursing Department of Jiaozuo People's Hospital were selected as the research objects by the convenient sampling method. General information questionnaire, Presenteeism Behavior Scale, Job Alienation Scale and Job Burnout Scale were used to investigate the nurses. Pearson correlation was used to analyze the correlation between presenteeism behavior and job burnout and job alienation, and Bootstrap test was used to explore the mediating effect. A total of 506 questionnaires were distributed and 506 were valid, with an effective recovery rate of 100.00%.Results:The total scores of job burnout, job alienation and presenteeism among 506 nurses were (63.43±8.03) , (34.16±5.55) and (6.32±1.56) , respectively. Pearson analysis showed that presenteeism was positively correlated with job alienation and job burnout ( P<0.01) . Using the Bootstrap sampling test method to conduct a mediating effect study, 95% confidence interval for the path analysis from burnout to presenteeism to job alienation did not include the number 0, and nurses' presenteeism behavior played a mediating role between job alienation and job burnout. Conclusions:Nurses have high presenteeism behavior, which plays a mediating role between job burnout and job alienation. Therefore, it is necessary to reduce the frequency of nurse presenteeism behavior and promote physical and mental health.

OBJECTIVE: To study mechanism of improvement of stress concentration on patellofemoral joint by stiletto needle releasing lateral patellar retinaculum guided by the theory of Jinshugu() and based on the finite element model of knee joint. and to elucidate the biomechanical mechanism of stiletto needle releasing changing patellar trajectory and reducing patellofemoral joint pressure. METHODS: CT data of knee joint from a normal male (aged 29, heighted 171 cm, weighted 58 kg) was selected. Starting with construction of three-dimensional model of knee joint by using finite element software, the finite element model of knee joint with complete tendonand bone structures were established through several steps, such as geometric reconstruction, reverse engineering, meshing, material assignment and loading analysis. The loading condition was set as 500 N load on knee joint, and the average tensile stress of quadriceps femoris tendon was about 200 N. To simulate the release of lateral patellar retinaculum by stiletto needle at 30 and 90 position of knee flexion in finite element model separately, and to compare the improvement of stress concentration of patellofemoral joint by stiletto needle intervention under different knee flexion conditions. RESULTS: The peak stress of patellofemoral joint and tibiofemoral joint decreased after stiletto needle releasing of patellofemoral lateral retinaculum compared with before intervention, which was(1) knee flexion at 30 degrees:patellar cartilage decreased by 0.498 MPa (decreased 9.06%), femoral trochlea decreased by 0.886 MPa(decreased 16.27%);(2) knee flexion at 90 degrees:patellar cartilage decreased by 0.558 MPa (decreased 8.6%), femoral trochlea decreasedby 0.607 MPa (decreased 9.94%). CONCLUSION Releasing lateral patellofemoral retinaculum with stiletto needle could effectively alleviate the stress concentration of patellofemoral joint and reduce local stress peak value, which it is helpful to improve patellar trajectory and make stress distribution more uniform.
Adult ; Biomechanical Phenomena ; Finite Element Analysis ; Humans ; Knee Joint ; Male ; Patella ; Patellofemoral Joint ; Quadriceps Muscle ; Range of Motion, Articular

Objective:To investigate the clinicopathological and molecular characteristics of the epithelioid glioblastoma (eGBM) with BRAF V600E mutation.Methods:Sixteen cases of eGBM with BRAF V600E mutation diagnosed at the West China Hospital of Sichuan University, China from 2012 to 2019 were collected. Their clinicopathological and molecular characteristics were analyzed. Results:The range of patients′ age was from 7 to 61 years (median 31.5 years). There were 4 males and 12 females, with a male to female ratio of 1∶3. Eleven cases were newly diagnosed eGBM and five cases had a previous history of astrocytomas. Most of the tumors were located in the cerebral hemisphere, often in the frontal lobe, with an average diameter of 4.6 cm (2.0-8.0 cm). The tumors were composed of relatively uniform, closely packed epithelioid cells, some showing discohesion, with distinct cell membrane, eosinophilic cytoplasm, eccentric nuclei, distinct nucleoli and mitotic activity. Palisaded/coagulative necrosis was seen in all cases. Glomerular microvascular proliferation was seen in most of the cases, while mono-or multi-nucleated tumor giant cells were seen in some cases. Focal sarcomatoid area was seen in 2 cases, and focal pleomorphic xanthoastrocytoma (PXA)-like area was seen in 3 cases. Immunohistochemistry showed variable positivity for GFAP, Olig2 and p53. The median Ki-67 index was 30% (10%-50%). Only one case lost ATRX protein expression. Sanger sequencing identified the BRAF V600E mutation in all sixteen patients. Five cases also had mutations in the TERT gene promoter. No IDH1 (R132) or IDH2 (R172) mutation was detected. Surgical resection of the tumors was performed for all patients, and 3 patients also received adjuvant radiotherapy and chemotherapy. Follow-up data were available for 15 patients, with a follow-up time of 1-89 months (median 10 months). Among the 15 patients, 7 patients died of disease and another 5 patients had recurrences. The overall survival time of the patients under 35 years of age was significantly longer than that of the patients aged 35 years or older ( P=0.014), but their progression-free survival was not statistically different ( P=0.232). Conclusions:eGBM with BRAF V600E mutation is more commonly detected in young women than other the populations (i.e. elderly or male). The epithelioid morphology should include rhabdoid meningioma, anaplastic PXA, atypical teratoid/rhabdoid tumor, metastatic tumors, and melanoma in its differential diagnosis. PXA-like area is observed in some eGBM cases, suggesting a relationship of these two types of tumor. eGBM is a high-grade malignant tumor and most of the cases show recurrences or deaths in a short-period time. The younger patients have a relatively better prognosis than the older ones.

OBJECTIVE: To construct a dynamic knee joint finite element model based on CT image data and verify the validity of the model. To provide a simulation model and basic data for biomechanical research of the knee joint by further finite element analysis. METHODS: The CT data of a healthy male knee joint was selected. With the help of Mimics 19.0 and Hypermesh 12.0 software, a high simulation finite element model of knee joint was established following steps, including geometric reconstruction, reverse engineering, meshing and material characterization. The dynamic knee flexion model was generated by determining the boundary conditions and torque loading, and the validity of themodel was confirmed. The biomechanical changes of the tibiofemoral and patellofemoral joints under different knee flexion angles were analyzed by applying the loads (500 N) to the finite element model during knee flexion. RESULTS: A finite element model of knee joint was established based on CT images and anatomical characteristics. The model included three-dimensional elements such as bone, ligament, cartilage, meniscus and patellar retinaculum. The different finite element models of knee flexion states were produced by applying different torques after establishing boundary conditions. According to equivalent conditions (knee flexion 30 degrees, quadriceps tendon under 200 N stretch), the peak stress value of patella was 2.209 MPa and the average Mises stress was 1.132 MPa; the peak stress value of femoral trochlear was 1.405 MPa and the average Mises stress was 0.936 MPa. The validity of the model was proved by the difference between the model and previous studies of 1% to 13.5%. Dynamic model loading showed that the Mises stressof tibiofemoral joint decreased with the increase of knee flexion angle, while the Mises stress of patellofemoral joint was positively correlated with knee flexion angle. The Mises stress of cartilage stress planes at different knee flexion angles was significantly different(<0.05). CONCLUSION The finite element model established in this study is more comprehensive and can effectively simulate the biomechanical characteristics of dynamic knee joint, which provides support for further simulation mechanics researches of the knee joint.
Biomechanical Phenomena ; Finite Element Analysis ; Humans ; Knee Joint ; diagnostic imaging ; Male ; Patella ; Stress, Mechanical ; Tomography, X-Ray Computed

Objective: Several COVID-19 patients have overlapping comorbidities. The independent role of each component contributing to the risk of COVID-19 is unknown, and how some non-cardiometabolic comorbidities affect the risk of COVID-19 remains unclear. Methods: A retrospective follow-up design was adopted. A total of 1,160 laboratory-confirmed patients were enrolled from nine provinces in China. Data on comorbidities were obtained from the patients' medical records. Multivariable logistic regression models were used to estimate the odds ratio ( Results: Overall, 158 (13.6%) patients were diagnosed with severe illness and 32 (2.7%) had unfavorable outcomes. Hypertension (2.87, 1.30-6.32), type 2 diabetes (T2DM) (3.57, 2.32-5.49), cardiovascular disease (CVD) (3.78, 1.81-7.89), fatty liver disease (7.53, 1.96-28.96), hyperlipidemia (2.15, 1.26-3.67), other lung diseases (6.00, 3.01-11.96), and electrolyte imbalance (10.40, 3.00-26.10) were independently linked to increased odds of being severely ill. T2DM (6.07, 2.89-12.75), CVD (8.47, 6.03-11.89), and electrolyte imbalance (19.44, 11.47-32.96) were also strong predictors of unfavorable outcomes. Women with comorbidities were more likely to have severe disease on admission (5.46, 3.25-9.19), while men with comorbidities were more likely to have unfavorable treatment outcomes (6.58, 1.46-29.64) within two weeks. Conclusion Besides hypertension, diabetes, and CVD, fatty liver disease, hyperlipidemia, other lung diseases, and electrolyte imbalance were independent risk factors for COVID-19 severity and poor treatment outcome. Women with comorbidities were more likely to have severe disease, while men with comorbidities were more likely to have unfavorable treatment outcomes.
Adult ; Aged ; COVID-19/virology* ; China/epidemiology* ; Comorbidity ; Female ; Humans ; Male ; Middle Aged ; Retrospective Studies ; Severity of Illness Index ; Treatment Outcome

Objective To analyze the prediction efficiency of scoring models at home and abroad on delayed graft function (DGF) after renal transplantation in China. Methods The clinical data of 112 donors and 220 recipients undergoing renal transplantation were prospectively analyzed. The DGF predicted by KDRI model, Jeldres model, and model of our center was compared with actual DGF incidence of renal transplant recipients. The prediction efficiency of each model was analyzed. The predictive accuracy was compared by the area under curve (AUC) of receiver operating characteristic (ROC) curve. Results The DGF incidence of 220 renal transplant recipients was 14.1% (31/220). DGF prediction using KDRI model showed that 41 cases were high risk donors, the AUC was 0.57, the sensitivity was 0.37, the specificity was 0.66, and the positive predictive value was 22%. DGF prediction using Jedres model showed that 22 cases were high risk recipients, the AUC was 0.56, the sensitivity was 0.13, the specificity was 0.92 and the positive predictive value was 20%. DGF prediction using the model of our center showed that 25 cases were high risk donors, the AUC was 0.80, the sensitivity was 0.53, the specificity was 0.84, the positive predictive value was 40%. Conclusions Compared with the KDRI and Jedres models, the prediction model of our center has higher AUC and sensitivity with a better prediction efficiency on DGF. Therefore, it is a suitable evaluation system of donors from donation after citizen's death in Chinese.

【Objective】 To investigate the association between fetal fraction(FF) of cell-free DNA and adverse pregnancy outcomes. 【Methods】 A retrospective case-control study was conducted in 1 231 Chinese pregnant women who underwent non-invasive prenatal testing and gave birth to their children in the Third Affiliated Hospital of Sun Yatsen University during January 2017 to October 2018, including HDP group(n = 84), FGR group(n = 57) and preterm birth group(n = 59) as case groups, and the pregnant women without pregnancy-related complications were included in the control group(n = 1 031). The correlation between FF and maternal age, gestational weeks, body mass index(BMI), and comparison of FF difference in different groups were analyzed. 【Results】 In 1 031 normal pregnant women performed NIPT, the plasma FF was(12.03 ± 3.64) %, FF and maternal BMI were negatively correlated(rs = -0.079, P < 0.05). FF in HDP, FGR, preterm birth group were(11.21 ± 2.60) %, (12.48 ± 3.92) %, (11.66 ± 3.34) % , respectively. Compared with control group, FF in HDP group was statistically lower, OR = 0.926, 95%CI: 0.859-0.997, P = 0.043. FF in FGR group and preterm birth group were not statistically different compared with control group. 【Conclusions】 Low FF is a risk factor of HDP, and we may apply FF of cell-free DNA to predict the risk of HDP in further research. The correlation of FF and FGR, preterm birth have not been found yet.

In this study, the texture analyzer acupuncture pressure sensor was used to objectively characterize the "herb soaking with exact amount of water" for moistening process of ginseng. The single factor rotation experiment was used to investigate the effects of puncture speed, puncture depth and puncture site on puncture force and work. According to ginseng processing method in Chinese Pharmacopoeia, ginseng medicinal materials with diameters of about 1 cm and 2 cm were selected, and puncture experiments were carried out at the set measurement time to determine the hardness, work and water absorption of the ginseng moistening process. The endpoint threshold for the ginseng softening process was determined and verified. To reflect the actual internal conditions of the ginseng softening process, the puncture depth was preferably 70%, and the puncture speed was 30 mm·min~(-1). In the ginseng moistening process, the softening hardness and the puncture work were in accordance with the first-order kinetic equation y=a×exp(-k×x). The 0 h initial hardness a of 1 cm and 2 cm ginseng herbs were 289.8 N and 1 227 N, and the rate constants K were 0.149 4 N·h~(-1) and 0.100 7 N·h~(-1), respectively. After the ginseng was completely softened, the force required for puncture was 10 N, which can be used as the standard for "drug penetration". At this time, the water absorption rate of ginseng was 70%-100%. The softening time of ginseng with a diameter of 1 cm was about 20-22 h, and the softening time of ginseng with a diameter of 2 cm was about 40-46 h. A needle-type pressure sensor was used to accurately determine the end point of the softening process of ginseng and reduce the loss of active ingredients. The study results provide reference for the softening process kinetics and the process intelligent monitoring of other dried roots and rhizomes.
Drugs, Chinese Herbal ; Panax ; Plant Roots ; Rhizome ; Technology, Pharmaceutical ; Water