Six compounds were isolated from the roots of Ephedra sinica Stapf using various chromatographic techniques such as silica gel column chromatography, thin layer chromatography and semi-preparative HPLC. Their chemical structures were identified by analysis of physicochemical properties and spectral data, and determined as (Z)-docosanylferulate (1), (E)-docosanylferulate (2), bis (2-ethylheptyl) phythalate (3), 2,2′-oxybis (1,4-di-tert-butylbenzene) (4), diisobutyl phthalate (5), bis (2-ethylhexyl) phthalate (6). Among them, compound 1 is a new compound, compounds 2-4 were first isolated from Ephedra. A corticosterone-induced PC-12 cell injury model was used for compound activity screening. The results showed that compounds 1 and 5 significantly improved corticosterone-induced PC-12 cell injury and significantly increased 5-HT₇ receptor protein expression in the cells, indicating potential antidepressant activity.

Based on the strategy of metabolomics combined with bioinformatics, this study analyzed the potential allergens and mechanism of pseudo-allergic reactions (PARs) induced by the combined use of Reduning injection and penicillin G injection. All animal experiments and welfare are in accordance with the requirements of the First Affiliated Experimental Animal Ethics and Animal Welfare Committee of Henan University of Chinese Medicine (approval number: YFYDW2020002). Based on UPLC-Q-TOF/MS technology combined with UNIFI software, a total of 21 compounds were identified in Reduning and penicillin G mixed injection. Based on molecular docking technology, 10 potential allergens with strong binding activity to MrgprX2 agonist sites were further screened. Metabolomics analysis using UPLC-Q-TOF/MS technology revealed that 34 differential metabolites such as arachidonic acid, phosphatidylcholine, phosphatidylserine, prostaglandins, and leukotrienes were endogenous differential metabolites of PARs caused by combined use of Reduning injection and penicillin G injection. Through the analysis of the "potential allergen-target-endogenous differential metabolite" interaction network, the chlorogenic acids (such as chlorogenic acid, neochlorogenic acid, cryptochlorogenic acid, and isochlorogenic acid A) and β-lactam allergens in the combination of the two may be mainly regulated by PLD1, PLA2G12A and CYP1A1. The three upstream signal target proteins mainly activate the arachidonic acid metabolic pathway, promote the degranulation of mast cells, release downstream endogenous inflammatory mediators, and induce PARs.

AIM To study the neoflavonoids from Dalbergia cochinchinensis Pierre ex Laness and their anti-hypoxia/reoxygenation injury activities on H9c2 myocardial cells.METHODS The 70%ethanol extract from D.cochinchinensis was isolated and purified by silica gel,Sephadex LH-20 and reverse-preparative HPLC,then the structures of obtained compounds were identified by physicochemical properties and spectral data.The CCK-8 method was used to detect their activities on H9c2 cells and protective effects on hypoxia-reoxygenation injury of H9c2 cells,and their structure-activity relationship was analyzed.RESULTS Twelve compounds were isolated and identified as latifolin(1),5-O-methyllatifolin(2),mimosifoliol(3),5-O-methydalbergiphenol(4),dalbergiphenol(5),cearoin(6),2,4-dihydroxy-5-methoxy-benzophenone(7),2-hydroxy-4,5-dimethoxybenzophenone(8),melannoin(9),2,2′,5-trihydroxy-4-methoxybenzophenone(10),dalbergin(11),4-methoxydalbergione(12).The dalbergiphenols and dalbergins had little toxicity to H9c2 cells,and dalbergiphenols had strong activity against hypoxia-reoxygenation injury of H9c2 cells.CONCLUSION Compound 8 is a new natural product.Compounds 4,9 are isolated from this plant for the first time.Dalbergiphenols may be the main neoflavonoids against hypoxia-reoxygenation injury of H9c2 cells.

Platycodonis Radix is the dry root of Platycodon grandiflorum of Campanulaceae, which has a variety of pharmacological effects and is a commonly used bulk Chinese medicine. In this study, the chloroplast genome sequences of six P. grandiflorum from different producing areas has been sequenced with Illumina HiSeq X Ten platform. The specific DNA barcodes were screened, and the germplasm resources and genetic diversity were analyzed according to the specific barcodes. The total length of the chloroplast genome of 6 P. grandiflorum samples was 172 260-172 275 bp, and all chloroplast genomes showed a typical circular tetrad structure and encoded 141 genes. The comparative genomics analysis and results of amplification efficiency demonstrated that trnG-UCC and ndhG_ndhF were the potential specific DNA barcodes for identification the germplasm resources of P. grandiflorum. A total of 305 P. grandiflorum samples were collected from 15 production areas in 9 provinces, for which the fragments of trnG-UCC and ndhG_ndhF were amplificated and the sequences were analyzed. The results showed that trnG-UCC and ndhG_ndhF have 5 and 11 mutation sites, respectively, and 5 and 7 haplotypes were identified, respectively. The combined analysis of the two sequences formed 13 haplotypes (named Hap1-Hap13), and Hap4 is the main genotype, followed by Hap1. The unique haplotypes possessed by the three producing areas can be used as DNA molecular tags in this area to distinguish from the germplasm resources of P. grandiflorum from other areas. The haplotype diversity, nucleotide diversity and genetic distance were 0.94, 4.79×10^-3 and 0.000 0-0.020 3, respectively, suggesting that the genetic diversity was abundant and intraspecific kinship was relatively close. This study laid a foundation for the identification of P. grandiflorum, the protection and utilization of germplasm resources, and molecular breeding.

Exploring the risk "time interval window" of sequential medication of Reduning injection (RDN) and penicillin G injection (PG) by detecting the correlation between serum biochemical indexes and plasma metabonomic characteristics, in order to reduce the risk of adverse reactions caused by the combination of RDN and PG. All animal experiments and welfare are in accordance with the requirements of the First Affiliated Experimental Animal Ethics and Animal Welfare Committee of Henan University of Chinese Medicine (approval number: YFYDW2020002). The changes of biochemical indexes in serum of rats were detected by enzyme-linked immunosorbent assay. It was determined that RDN combined with PG could cause pseudo-allergic reactions (PARs) activated by complement pathway. Further investigation was carried out at different time intervals (1.5, 2, 3.5, 4, 6, and 8 h PG+RDN). It was found that sequential administration within 3.5 h could cause significant PARs. However, PARs were significantly reduced after administration interval of more than 4 h. LC-MS was used for plasma metabolomics analysis, and the levels of serum biochemical indicators and plasma metabolic profile characteristics were compared in parallel. 22 differential metabolites showed similar or opposite trends to biochemical indicators before and after 3.5 h. And enriched to 10 PARs-related pathways such as arachidonic acid metabolism, steroid hormone biosynthesis, linoleic acid metabolism, glycerophospholipid metabolism, and tryptophan metabolism. In conclusion, there is a risk "time interval window" phenomenon in the adverse drug reactions caused by the sequential use of RDN and PG, and the interval medication after the "time interval window" can significantly reduce the risk of adverse reactions.

Four furan α-butenolactones were isolated from 50% acetone extract of tuber of Alisma orientale by silica gel column, chromatography gel column and high performance liquid chromatography techniques. Their structures were identified by modern wave spectroscopy techniques and electronic circular dichroism (ECD) and assigned as (5R)-5-hydroxy-3,4-dimethylfuran-2(5H)-one (1), 5-hydroxy-3,5-dimethylfuran-2(5H)-one (2), 5-hydroxy-4-(1-methylethyl)-2(5H)-furanone (3) and alismanoid A (4). Compound 1 was new compound and compounds 2–4 were first isolated from Alisma orientale. Compound 1-4 had potential antifibrotic activities.

italic>Acanthopanax senticosus is one of the genuine regional herb in Northeast China. In this study, we identified the germplasm resources of commercial A. senticosus samples based on atpI and atpB_rbcL according to the previous chloroplast genome sequencing results, and determinated the content of syringin by HPLC to evaluated the quality of commercial samples. A total of 80 A. senticosus samples were collected from 47 cities in 24 provinces. DNA was extracted to amplify the products of atpI and atpB_rbcL by PCR. The results showed that 7 haplotypes (H2, H5, H8, H10, H12, H14, H23) were formed by the combined analysis of the two gene fragments. H2 from Yichun in Heilongjiang, Shangzhi in Harbin, Suihua in Heilongjiang, Fushun in Liaoning, Benxi in Liaoning, Changbai in Jilin and Jingyu in Jilin were the dominant genotype, representing 58.75% of the total samples. H14 and H23 were the unique haplotypes of the producing area. It is speculated that the commercial A. senticosus samples with haplotypes of H14 and H23 are from Raohe, Shuangyashan, Heilongjiang and Mingshui, Suihua, Heilongjiang, respectively. HPLC analysis indicated that the content of syringin in 73.96% of the samples met the Pharmacopoeia standards. There was a significant difference in the content of syringin among the samples, ranging from 0.003 7% to 0.524 5%, with a difference of 0.520 8%, indicating that the quality of the samples in the market of A. senticosus was uneven. However, there were no significant differences in the contents of syringin in the commercial A. senticosus among different haplotypes. The content of syringin in the haplotype H23 in the market sample is relatively high, so it may be a germplasm with better quality. This study researched the germplasm resources and medicinal materials quality of commercial A. senticosus samples and will help guide the commercial circulation, reasonable medication of A. senticosus, and the screening of excellent germplasm.

Biomacromolecule drugs have been increasingly used in clinical practice due to their distinct advantages, including precise targeting, small dose, high safety and activity. However, owing to their high molecular weight, strong hydrophilicity, and poor stability in the gastrointestinal tract, the oral bioavailability of the biomacromolecule drugs remains extremely poor. As a novel and innovative technology for active drug delivery, gastrointestinal microneedles hold immense potential in the oral delivery of biomacromolecule drugs because of their low-invasive nature and high permeation enhancement effects. This review primarily summarizes the actuating force, design strategies, fabrication techniques, and applications of gastrointestinal microneedles for the oral delivery of biomacromolecule drugs. Additionally, the challenges and further perspectives in the development this technology are presented, aiming to promote the subsequent research and clinical translation of gastrointestinal microneedles, and to provide a new efficient and safe strategy for oral delivery of biomacromolecule drugs.

Objective:To evaluate the diagnostic efficacy and practicality of the Jaundice color card (JCard) as a screening tool for neonatal jaundice.Methods:Following the standards for reporting of diagnostic accuracy studies (STARD) statement, a multicenter prospective study was conducted in 9 hospitals in China from October 2019 to September 2021. A total of 845 newborns who were admitted to the hospital or outpatient department for liver function testing due to their own diseases. The inclusion criteria were a gestational age of ≥35 weeks, a birth weight of ≥2 000 g, and an age of ≤28 days. The neonate′s parents used the JCard to measure jaundice at the neonate′s cheek. Within 2 hours of the JCard measurement, transcutaneous bilirubin (TcB) was measured with a JH20-1B device and total serum bilirubin (TSB) was detected. The Pearson′s correlation analysis, Bland-Altman plots and the receiver operating characteristic (ROC) curve were used for statistic analysis.Results:Out of the 854 newborns, 445 were male and 409 were female; 46 were born at 35-36 weeks of gestational age and 808 were born at ≥37 weeks of gestational age. Additionally, 432 cases were aged 0-3 days, 236 cases were aged 4-7 days, and 186 cases were aged 8-28 days. The TSB level was (227.4±89.6) μmol/L, with a range of 23.7-717.0 μmol/L. The JCard level was (221.4±77.0) μmol/L and the TcB level was (252.5±76.0) μmol/L. Both the JCard and TcB values showed good correlation ( r=0.77 and 0.80, respectively) and agreements (96.0% (820/854) and 95.2% (813/854) of samples fell within the 95% limits of agreement, respectively) with TSB. The JCard value of 12 had a sensitivity of 0.93 and specificity of 0.75 for identifying a TSB ≥205.2?μmol/L, and a sensitivity of 1.00 and specificity of 0.35 for identifying a TSB ≥342.0?μmol/L. The TcB value of 205.2?μmol/L had a sensitivity of 0.97 and specificity of 0.60 for identifying TSB levels of 205.2 μmol/L, and a sensitivity of 1.00 and specificity of 0.26 for identifying TSB levels of 342.0 μmol/L. The areas under the ROC curve (AUC) of JCard for identifying TSB levels of 153.9, 205.2, 256.5, and 342.0 μmol/L were 0.96, 0.92, 0.83, and 0.83, respectively. The AUC of TcB were 0.94, 0.91, 0.86, and 0.87, respectively. There were both no significant differences between the AUC of JCard and TcB in identifying TSB levels of 153.9 and 205.2 μmol/L (both P>0.05). However, the AUC of JCard were both lower than those of TcB in identifying TSB levels of 256.5 and 342.0 μmol/L (both P<0.05). Conclusions:JCard can be used to classify different levels of bilirubin, but its diagnostic efficacy decreases with increasing bilirubin levels. When TSB level are ≤205.2 μmol/L, its diagnostic efficacy is equivalent to that of the JH20-1B. To prevent the misdiagnosis of severe jaundice, it is recommended that parents use a low JCard score, such as 12, to identify severe hyperbilirubinemia (TSB ≥342.0 μmol/L).

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.