Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

Electromagnetic fields can regulate the fundamental biological processes involved in bone remodeling. As a non-invasive physical therapy, electromagnetic fields with specific parameters have demonstrated therapeutic effects on bone remodeling diseases, such as fractures and osteoporosis. Electromagnetic fields can be generated by the movement of charged particles or induced by varying currents. Based on whether the strength and direction of the electric field change over time, electromagnetic fields can be classified into static and time-varying fields. The treatment of bone remodeling diseases with static magnetic fields primarily focuses on fractures, often using magnetic splints to immobilize the fracture site while studying the effects of static magnetic fields on bone healing. However, there has been relatively little research on the prevention and treatment of osteoporosis using static magnetic fields. Pulsed electromagnetic fields, a type of time-varying field, have been widely used in clinical studies for treating fractures, osteoporosis, and non-union. However, current clinical applications are limited to low-frequency, and research on the relationship between frequency and biological effects remains insufficient. We believe that different types of electromagnetic fields acting on bone can induce various “secondary physical quantities”, such as magnetism, force, electricity, acoustics, and thermal energy, which can stimulate bone cells either individually or simultaneously. Bone cells possess specific electromagnetic properties, and in a static magnetic field, the presence of a magnetic field gradient can exert a certain magnetism on the bone tissue, leading to observable effects. In a time-varying magnetic field, the charged particles within the bone experience varying Lorentz forces, causing vibrations and generating acoustic effects. Additionally, as the frequency of the time-varying field increases, induced currents or potentials can be generated within the bone, leading to electrical effects. When the frequency and power exceed a certain threshold, electromagnetic energy can be converted into thermal energy, producing thermal effects. In summary, external electromagnetic fields with different characteristics can generate multiple physical quantities within biological tissues, such as magnetic, electric, mechanical, acoustic, and thermal effects. These physical quantities may also interact and couple with each other, stimulating the biological tissues in a combined or composite manner, thereby producing biological effects. This understanding is key to elucidating the electromagnetic mechanisms of how electromagnetic fields influence biological tissues. In the study of electromagnetic fields for bone remodeling diseases, attention should be paid to the biological effects of bone remodeling under different electromagnetic wave characteristics. This includes exploring innovative electromagnetic source technologies applicable to bone remodeling, identifying safe and effective electromagnetic field parameters, and combining basic research with technological invention to develop scientifically grounded, advanced key technologies for innovative electromagnetic treatment devices targeting bone remodeling diseases. In conclusion, electromagnetic fields and multiple physical factors have the potential to prevent and treat bone remodeling diseases, and have significant application prospects.

The European Society of Cardiology (ESC) released the "2024 ESC guidelines for the management of elevated blood pressure and hypertension" on August 30, 2024. This guideline updates the 2018 "Guidelines for the management of arterial hypertension." One notable update is the introduction of the concept of "elevated blood pressure" (120-139/70-89 mm Hg). Additionally, a new systolic blood pressure target range of 120-129 mm Hg has been proposed for most patients receiving antihypertensive treatment. The guideline also includes numerous additions or revisions in areas such as non-pharmacological interventions and device-based treatments for hypertension. This article interprets the guideline's recommendations on definition and classification of elevated blood pressure and hypertension, and cardiovascular disease risk assessment, diagnosing hypertension and investigating underlying causes, preventing and treating elevated blood pressure and hypertension. We provide a comparison interpretation with the 2018 "Guidelines for the management of arterial hypertension" and the "2017 ACC/AHA guideline on the prevention, detection, evaluation, and management of high blood pressure in adults."

Depression is a high-incidence mental disorder with complex causes and multifaceted pathogenic mechanisms. Its pathogenesis has not yet been fully elucidated， which has hindered the development of novel and highly effective antidepressant drugs. This condition severely affects human physical and mental health while imposing a significant socio-economic burden. At present， several hypotheses exist regarding the pathogenesis of depression， including monoamine neurotransmitter imbalances， neurotrophic factor deficiencies， neural plasticity impairments， glutamate dysregulation， neuroinflammatory disorders， gut microbiota imbalances， and mitochondrial autophagy dysfunction. Currently， most clinical antidepressants are monoamine neurotransmitter reuptake inhibitors. Although they exhibit certain therapeutic effects， they are associated with significant drawbacks， such as severe adverse reactions and poor patient compliance. In contrast， traditional Chinese medicine （TCM）， characterized by its multi-targeted effects， mild efficacy， and minimal side effects， has demonstrated significant advantages in the treatment of depression. Chinese medicine Polygalae Radix possesses the functions of calming the mind， enhancing cognitive functions， harmonizing the heart and kidneys， and dispelling phlegm to open orifices. It is often included in compound prescriptions for the clinical treatment of depression. Based on current hypotheses regarding the pathogenesis of depression， this paper systematically reviews research progress on the antidepressant mechanisms of Polygalae Radix from multiple perspectives， including its active components， its use in herbal pairings， and its inclusion in TCM compound prescriptions. This review aims to provide a scientific basis for the clinical application of Polygalae Radix in antidepressant therapy and to serve as a reference for the modernization of its antidepressant research.

BACKGROUND:The effect of anterior controllable anteriodisplacement and fusion on the biomechanics of cervical spine is still unclear.Previous studies have majorly focused on surgical techniques,the medium-and long-term efficacy,and postoperative complications of anterior controllable anteriodisplacement and fusion. OBJECTIVE:To analyze the biomechanical effects of anterior controllable anteriodisplacement and fusion on vertebrae-ossification of posterior longitudinal ligament complex and implants of the cervical spine using finite element method. METHODS:A healthy male volunteer was recruited for CT scanning of the entire cervical spine.Using the finite element analysis software,a normal whole cervical spine model was constructed and its validity was verified by comparison with the previous articles.Subsequently,a preoperative model of continuous posterior longitudinal ligament ossification involving C4,C5,and C6 was constructed.Based on the preoperative model,a three-dimensional finite element model of anterior controllable anteriodisplacement and fusion was created.After constrain of the lower surface of the C7 vertebral body of the two models,an axial force of 50 N and a moment of 1.0 N·m were applied to the upper surface of the C1 cone body.Under forward flexion,posterior extension,left/right bending,and left/right rotation conditions,the effects of anterior controllable anteriodisplacement and fusion on vertebrae-ossification of posterior longitudinal ligament complex and implants were further analyzed. RESULTS AND CONCLUSION:(1)From the preoperative model,it was found that the ossification stress was mainly concentrated in the C4/5 segment;the maximum stresses of vertebrae-ossification of posterior longitudinal ligament complex under the conditions of forward flexion,posterior extension,left bending,right bending,left rotation and right rotation were 10.1,148.6,68.9,74.8,83.8,and 85.1 MPa,respectively.(2)After anterior controllable anteriodisplacement and fusion,the distribution area of stress concentration at the vertebrae-ossification of posterior longitudinal ligament complex did not change significantly,but the values were decreased obviously;in addition to the increase of stress(+44.7%)in the anterior flexion at the surgical model of anterior controllable anteriodisplacement and fusion,when compared with the preoperative one,the anterior controllable anteriodisplacement and fusion stress was significantly lower than that in the preoperative model under the other five working conditions,in which the value was decreased by-74.1%at the posterior extension position.Under the left bending,right bending,left rotation and right rotation,the ossification stress was decreased by 62.2%,63.3%,66.4%,and 67.9%,respectively.(3)The stress of titanium plate and screw was mainly concentrated at the both ends;the largest posterior extension stress was 149.5 MPa while the smallest forward flexion stress was 43.3 MPa.The stress of the four intervertebral cages was mainly concentrated at the C3/4 and C6/7 ones;and the stress was mainly distributed around the upper and lower surfaces of the fusion device,its value ranging from 30.8 MPa(the largest extension stress)to 11.5 MPa(the lowest forward flexion stress).The stress of the implants(titanium plate,screw,and intervertebral cage)was mainly concentrated at the two ends with the largest values,which would lead to the fracture of the titanium plate screw and the loosening of the screws.(4)In conclusion,anterior controllable anteriodisplacement and fusion was able to significantly reduce the stress of vertebrae-ossification of posterior longitudinal ligament complex,and may help prevent excessive proliferation and compression of nerves.After surgery,much attention should be paid to the occurrence of loosening of the screws,or displacement and fracture of titanium plates at the both ends.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

BACKGROUND:Exercise has a regulatory effect on intestinal flora and glucose metabolism,but the effects of high-intensity intermittent exercise on intestinal flora and glucose metabolism in patients with type 2 diabetes mellitus are unclear. OBJECTIVE:To investigate the effects of high-intensity intermittent exercise on glucose metabolism and intestinal flora in patients with type 2 diabetes mellitus. METHODS:Eleven patients with type 2 diabetes mellitus were recruited,among which,two were lost to the follow-up and nine were finally enrolled.High-intensity intermittent exercise intervention was conducted 3 times per week for 6 continuous weeks.Fasting blood and fecal samples were collected before and after the intervention.Glucose metabolism indexes were detected in the blood samples,and intestinal flora was detected in the fecal samples.Changes in glucose metabolism indexes and intestinal flora indexes of the patients with type 2 diabetes mellitus before and after the intervention were compared. RESULTS AND CONCLUSION:After 6 weeks of high-intensity intermittent exercise intervention,fasting blood glucose and glycosylated serum protein levels in patients were significantly reduced(P<0.05),and fasting insulin,although not significantly changed,was decreased compared with before intervention.Alpha diversity analysis showed that the diversity(Shannon index),richness(Chao index)and coverage(Coverage index)did not change significantly.Venn diagrams showed that the relative abundance of Bacteroidetes,Actinobacteria,Proteobacteria,and Fusobacteria in the intestinal flora of the patients increased,and the relative abundance of Firmicutes decreased,and a significant decrease was seen in Ruminococcus_torques and Ruminococcus_gnavus in the Firmicutes,which were both positively correlated with the abnormalities of the glycemic metabolism-related indicators,as well as with other disease development.All these findings indicate that high-intensity intermittent exercise intervention has an improvement effect on the glycemic metabolism-related indexes of patients with type 2 diabetes mellitus,and the abundance of beneficial flora in the intestinal tract increases,and the abundance of harmful flora decreased,enhancing the stability of the intestinal flora in patients.

BACKGROUND:Pinoresinol diglucoside promotes bone formation and bone matrix synthesis and accelerates bone tissue repair.However,the mechanism of action and effects of this compound in osteoblasts need to be further explored. OBJECTIVE:To investigate the effect and mechanism of action of pinoresinol diglucoside on dexamethasone-treated osteoblasts based on the Wnt/β-catenin signaling pathway. METHODS:Different concentrations of dexamethasone groups and pinoresinol diglucoside groups were set to treat osteoblasts for 24 hours,and the optimal intervention concentrations were screened.Osteoblasts were treated with dexamethasone,pinoresinol diglucoside and inhibitor XAV-939.Then,control group,dexamethasone group,XVA-939 group,pinoresinol diglucoside group,pinoresinol diglucoside+XVA-939 group were set up.Cell counting kit-8 assay was used to detect cell activity.Alkaline phosphatase activity and caspase3/7 enzyme activity in cells were detected.Annexin V/PI staining and EdU assay were used to detect cell apoptosis and proliferation.Real-time qPCR and western blot were used to detect the mRNA and protein expression levels of Wnt3a,β-catenin,c-myc,osteocalcin,and type I collagen,respectively. RESULTS AND CONCLUSION:After dexamethasone and pinoresinol diglucoside intervened in osteoblasts for 24 hours,10 μmol/L dexamethasone was found to be the optimal intervention concentration for cell inhibition,and cell proliferation was most pronounced at a concentration of pinoresinol diglucoside of 100 μmol/L.Compared with the dexamethasone group,alkaline phosphatase activity was significantly enhanced(P<0.05)and caspase3/7 enzyme activity was significantly reduced(P<0.05)in the pinoresinol diglucoside group.Annexin V/PI staining and cell proliferation assay by EdU method showed that pinoresinol diglucoside inhibited apoptosis and promoted proliferation of osteoblasts after dexamethasone intervention.The mRNA and protein expression levels of Wnt3a,β-catenin,c-myc,osteocalcin,and type I collagen were significantly higher in the pinoresinol diglucoside group and pinoresinol diglucoside+XVA-939 group compared with the dexamethasone and XVA-939 groups(P<0.05).To conclude,pinoresinol diglucoside can inhibit osteoblast apoptosis after dexamethasone intervention,protect osteoblast activity and promote osteoblast proliferation by activating the Wnt/β-catenin signaling pathway,which may play a role in delaying steroid-induced osteonecrosis of the femoral head.

The accumulation of uremic toxins such as urea nitrogen, blood creatinine, and uric acid of patients with renal failure in vivo would lead to aggravated kidney damage. In this study, coated aldehyde oxy-starch (CAO) was used as an adsorbent to investigate its in vitro adsorption performance on renal failure indexes for urea, indoxyl sulfate (INS), monomethylamine (MMA), dimethylamine (DMA), uric acid (UA), and creatinine (Cr). The effects of variables such as pH, temperature, concentration, dosage, and time on the adsorption capacity of CAO were systematically investigated, employing analytical techniques of high-performance liquid chromatography (HPLC) and gas chromatography (GC). The results revealed that CAO exhibited a strong adsorption capacity for urea, INS, and MMA, alongside a moderate adsorption capacity for DMA, UA, and Cr. The adsorption kinetics and thermodynamic studies indicated that the adsorption of urea and UA by CAO were fitted in pseudo-first-order kinetics, and the adsorption isotherm aligned with the Freundlich adsorption model. The enthalpy change ΔH of urea in adsorption was in the range of 40 to 60 kJ·mol^-1, which demonstrated the presence of strong adsorption force due to the interactions of coordinating groups. The ΔH of UA was greater than 80 kJ·mol^-1, indicating the generation of chemical bonds during the adsorption. Both of them, Gibbs free energy ΔG was less than 0, within the range of -20 to 0 kJ·mol^-1, suggested that the adsorption of urea and UA by CAO occurred spontaneously as physical adsorption process. The adsorption entropy ΔS of urea and UA was > 0, which indicated an increase in entropy throughout the adsorption. The infrared spectroscopygram showed the formation of a chemical bond, specifically the imine bond, following the adsorption of urea by CAO, thereby indicating a chemical reaction during the adsorption. This study elucidates the adsorption mechanism of CAO on various indexes of renal failure, providing a scientific basis for its clinical usage.

OBJECTIVE To explore the pharmacokinetic characteristics of 3 blood-absorbed components of Xiangshao sanjie oral liquid in rats with hyperplasia of mammary gland （HMG）. METHODS Female SD rats were divided into control group and HMG group according to body weight， with 6 rats in each group. The HMG group was given estrogen+progesterone to construct HMG model. After modeling， two groups were given 1.485 g/kg of Xiangshao sanjie oral liquid （calculated by crude drug） intragastrically， once a day， for 7 consecutive days. Blood samples were collected before the first administration （0 h）， and at 5， 15， 30 minutes and 1， 2， 4， 8， 12， 24 hours after the last administration， respectively. Using chlorzoxazone as the internal standard， the plasma concentrations of ferulic acid， paeoniflorin and rosmarinic acid in rats were detected by UPLC-Q/TOF-MS. The pharmacokinetic parameters [area under the drug time curve （AUC0－24 h， AUC0－∞）， mean residence time （MRT0－∞）， half-life （t1/2）， peak time （tmax）， peak concentration （cmax）] were calculated by the non-atrioventricular model using Phoenix WinNonlin 8.1 software. RESULTS Compared with the control group， the AUC0－24 h， AUC0－∞ and cmax of ferulic acid in the HMG group were significantly increased （P＜0.05）； the AUC0－24 h， AUC0－∞ ， MRT0－∞ ， t1/2 and cmax of paeoniflorin increased， but there was no significant difference between 2 groups （P＞0.05）； the AUC0－24 h and MRT0-∞ of rosmarinic acid were significantly increased or prolonged （P＜0.05）. C ONCLUSIONS In HMG model rats， the exposure of ferulic acid， paeoniflorin and rosmarinic acid in Xiangshao sanjie oral liquid all increase， and the retention time of rosmarinic acid is significantly prolonged.