Conformal sphincter-preservation operation (CSPO) is considered the effective surgical technique for preserving the sphincter in cases of low rectal cancer. Accurate preoperative diagnosis and staging, reasonable selection of surgical approaches and technique, standardized perioperative management, and postoperative rehabilitation are the keys to ensuring the oncological clearance and functional preservation of CSPO. However, there is currently a lack of standardized surgical procedure for implementing CSPO in China. Therefore, the Colorectal Surgery Group of Surgery Branch of the Chinese Medical Association,along with the Colorectal Cancer Committee of the Chinese Medical Doctor Association and the Anorectal Branch of Chinese Medical Doctor Association, gathered experts in colorectal surgery to discuss and establish this standardized surgical procedure of CSPO. This standard, based on the latest evidence from literature, expert experiences, and China national condition, focuses on the definition, classification, pelvic anatomy, surgical techniques, postoperative complications, and perioperative care of CSPO. It aims to guide the standardized clinical practice of CSPO in China.
Humans ; Anal Canal/surgery* ; Rectal Neoplasms/surgery* ; Digestive System Surgical Procedures/methods* ; Pelvis ; Postoperative Complications

Intrauterine device(IUD)migrating to the bladder is rare,especially the migration far away from the uterus into the bladder wall.Due to no obvious clinical symptom in the early stage and being far away from the uterus,the IUD totally embedded in the bladder wall is prone to misdiagnosis and delay in treatment.We reported one case of such migration,aiming to improve the clinical management of the IUD totally embedded in the bladder wall.
Female ; Humans ; Urinary Bladder/surgery* ; Uterus ; Pelvis ; Intrauterine Devices/adverse effects*

OBJECTIVE: To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles. METHODS: Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S ₁ sacroiliac screw combined with 1 LC-Ⅱ screw (S ₁+LC-Ⅱ group), S ₁ sacroiliac screw combined with 2 LC-Ⅱ screws (S ₁+2LC-Ⅱ group), S ₁ sacroiliac screw combined with 2 posterior iliac screws (S ₁+2PIS group), S ₁ and S ₂ sacroiliac screws combined with 1 LC-Ⅱ screw (S ₁+S ₂+LC-Ⅱ group), S ₂-alar-iliac (S ₂AI) screw combined with 1 LC-Ⅱ screw (S ₂AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups. RESULTS: The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S ₁+LC-Ⅱ group was the largest, the S ₁+2LC-Ⅱ group and the S ₁+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₂AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S ₁+2PIS group and the smallest in the S ₁+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₁+S ₂+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S ₂AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₂AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S ₁+2PIS group and the smallest in the S ₁+LC-Ⅱ group. CONCLUSION For the treatment of Day type Ⅱ CFDP, it is recommended to choose S ₁ sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.
Adult ; Male ; Humans ; Finite Element Analysis ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Pelvis ; Spinal Fractures/surgery* ; Fracture Dislocation/surgery* ; Joint Dislocations/surgery* ; Biomechanical Phenomena

OBJECTIVE: To review the research progress of pubic symphysis diastasis and provide effective reference for orthopedic surgeons in the diagnosis and treatment of pubic symphysis diastasis. METHODS: The anatomy, injury mechanism, treatment, and other aspects of pubic symphysis diastasis were summarized and analyzed by reviewing the relevant research literature at domestically and internationally in recent years. RESULTS: The incidence of pubic symphysis diastasis is high in pelvic fractures, which is caused by the injury of the ligaments and fibrocartilage disc around the pubic symphysis by external force. The treatment plan should be individualized according to the pelvic stability and the needs of patients, aiming to restore the stability and integrity of the pelvis and improve the quality of life of patients after surgery. CONCLUSION At present, the research on pubic symphysis diastasis still needs to be improved. In the future, high-quality, multi-center, and large-sample studies are of great significance for the selection of treatment methods and the evaluation of effectiveness for patients with pubic symphysis diastasis.
Female ; Humans ; Pubic Symphysis Diastasis/etiology* ; Quality of Life ; Pubic Symphysis/injuries* ; Pelvis/surgery* ; Fractures, Bone/surgery*

OBJECTIVE: To analyze the effect of lag screw and support plate through axillary approach for the treatment of Ideberg typeⅡscapular pelvis fracture. METHODS: From January 2016 to June 2021, 26 patients with Ideberg typeⅡglenoid fractures were treated with trans-axillary lag screw combined with supporting plate, including 15 males and 11 females. The age ranged from 21 to 75 years, with an average of (43.12±6.56) years old. The Constant-Murley Shoulder joint Scale and University of California at Los Angeles (UCLA) score were used to evaluate the function and clinical efficacy of shoulder joint. RESULTS: All patients were followed up, and the duration ranged from 19 to 42 months, with an average of (30.6±10.5) months. One year after surgery, the Constant-Murley score increased from preoperative 34.9±2.5(ranged, from 28 to 47) to 87.2±6.8(ranged, from 70 to 95). The UCLA score improved from preoperative 17.9±1.7(9 to 25) to 33.1±2.3(29 to 35). Seventeen patients got an excellent result, with 7 good, and 2 fair. None of the patients had infection, screw, and plate loosening, fracture, and other complications after surgery. Two patients had different degrees of Chronic pain in the shoulder during the follow-up period. CONCLUSION The treatment of Ideberg typeⅡscapular glenoid fractures through axillary approach with lag screws and supporting steel plates has the advantages of convenient exposure, direct visual restoration of the normal anatomical shape of the scapular glenoid, selection of suitable positions for screw and steel plate placement, achieving better treatment results, and fewer complications. It is an effective and reliable surgical method.
Female ; Male ; Humans ; Young Adult ; Adult ; Middle Aged ; Aged ; Scapula ; Bone Plates ; Bone Screws ; Fractures, Bone ; Steel ; Pelvis

OBJECTIVE: To evaluate the feasibility of S₂ alar iliac screw insertion in Chinese children using computerized three-dimension reconstruction and simulated screw placement technique, and to optimize the measurement of screw parameters. METHODS: A total of 83 pelvic CT data of children who underwent pelvic CT scan December 2018 to December 2020 were retrospectively analyzed, excluding fractures, deformities, and tumors. There were 44 boys and 39 girls, with an average age of (10.66±3.52) years, and were divided into 4 groups based on age (group A:5 to 7 years old;group B:8 to 10 years old;group C:11-13 years old;group D:14 to 16 years old). The original CT data obtained were imported into Mimics software, and the bony structure of the pelvis was reconstructed, and the maximum and minimum cranial angles of the screws were simulated in the three-dimensional view with the placement of 6.5 mm diameter S2 alar iliac screws. Subsequently, the coronal angle, sagittal angle, transverse angle, total length of the screw, length of the screw in the sacrum, width of the iliac, and distance of the entry point from the skin were measured in 3-Matic software at the maximum and minimum head tilt angles, respectively. The differences among the screw parameters of S₂ alar iliac screws in children of different ages and the differences between gender and side were compared and analyzed. RESULTS: In all 83 children, 6.5 mm diameter S₂ iliac screws could be placed. There was no significant difference between the side of each screw placement parameter. The 5 to 7 years old children had a significantly smaller screw coronal angle than other age groups, but in the screw sagittal angle, the difference was more mixed. The 5 to 7 years old children could obtain a larger angle at the maximum head tilt angle of the screw, but at the minimum cranial angle, the larger angle was obtained in the age group of 11 to 13 years old. There were no significant differences among the age groups. The coronal angle and sagittal angle under maximum cephalic angle and minimum cranial angle of 5 to 7 years old male were (40.91±2.91)° and (51.85±3.75)° respectively, which were significantly greater than in female. The coronal angle under minimum cranial angle was significantly greater in girls aged 8-10 years old than in boys. For the remaining screw placement angle parameters, there were no significant differences between gender. The differences in the minimum iliac width, the screw length, and the length of the sacral screws showed an increasing trend with age in all age groups. The distance from the screw entry point to the skin in boys were significantly smaller than that of girls. The minimum width of the iliac in boys at 14 to 16 years of age were significantly wider than that in girls at the same stage. In contrast, in girls aged 5 to 7 years and 11 to 13 years, the screw length was significantly longer than that of boys at the same stage. CONCLUSION The pelvis of children aged 5 to 16 years can safely accommodate the placement of 6.5 mm diameter S₂ alar iliac screws, but the bony structures of the pelvis are developing and growing in children, precise assessment is needed to plan a reasonable screw trajectory and select the appropriate screw length.
Humans ; Male ; Female ; Child ; Adolescent ; Child, Preschool ; Ilium/surgery* ; Retrospective Studies ; Feasibility Studies ; Bone Screws ; Pelvis ; Sacrum/surgery* ; Spinal Fusion/methods*

Limb length discrepancy(LLD) is a common complication after total hip arthroplasty (THA). Good positioning of the prosthesis and suitable soft tissue tension are essential to ensure hip joint stability. Patients will be more satisfied if almost the same length of both lower extremities is achieved. Preoperative comprehensive evaluation of patients is helpful to prevent the occurrence of LLD after surgery. Therefore, the pelvic spine conditions, as well as type and cause of LLD should be analyzed in detail before surgery. During operation, limb length should be adjusted by touching the position of patella, Kirschner's wires positioning and referring to the relationship between the center of femoral head and the tip of greater trochanter. After surgery, it is necessary to clearly distinguish true LLD from functional LLD, and make a reasonable therapeutic plan according to patient's symptoms and the range of differences in limb length. This article reviews the latest literatures based on clinical practice experience and summarizes the research status of LLD after THA, which helps joint surgeons to have an in-depth understanding of this postoperative complication.
Humans ; Arthroplasty, Replacement, Hip/adverse effects* ; Femur ; Femur Head ; Lower Extremity ; Pelvis

Male ; Humans ; Penis ; Granuloma/etiology* ; Pelvis ; Iatrogenic Disease

Colorectal cancer is one of the most common cancers in the world, and surgery is the mainstage treatment. Urogenital and sexual dysfunction after radical resection of rectal cancer has become an important problem for patients, which seriously affects the quality of life. Some patients give up radical surgery for rectal cancer because of the concerns about sexual and urinary dysfunction. The cause of this problem is intraoperative of injury pelvic autonomic nerve. The preservation of the hypogastric nerve during the surgery is important for the male ejaculation. Pelvic splanchnic nerves are mainly responsible for the male erection. The anatomical origin, distribution, and urogenital function of these two nerves are detailed described in this article. At the same time, this article introduces the classification, key points of the operation and the evaluation of autonomic nerve preservation surgery. With the rapid development of minimally invasive surgery, performing radical surgery for rectal cancer is important, we also need to fully understand the anatomical concept of pelvic autonomic nerves, and apply modern minimally invasive surgical techniques to preserve the patient's pelvic autonomic nerves as well. It is an compulsory course and an important manifestation for the standardization of rectal cancer surgery.
Humans ; Male ; Clinical Relevance ; Quality of Life ; Autonomic Pathways/surgery* ; Rectal Neoplasms/surgery* ; Pelvis/innervation*

In recent years, with advances in pelvic oncology and surgical techniques, surgeons have redefined the boundaries of pelvic surgery. Combined pelvic exenteration is now considered the treatment of choice for some patients with locally advanced and locally recurrent rectal cancer, but it is only performed in a few hospitals in China due to the complexity of the procedure and the large extent of resection, complications, and high perioperative mortality. Although there have been great advances in oncologic drugs and surgical techniques and equipment in recent years, there are still many controversies and challenges in the preoperative assessment of combined pelvic organ resection, neoadjuvant treatment selection and perioperative treatment strategies. Adequate understanding of the anatomical features of the pelvic organs, close collaboration of the clinical multidisciplinary team, objective assessment and standardized preoperative combination therapy creates the conditions for radical surgical resection of recurrent and complex locally advanced rectal cancer, while the need for rational and standardized R0 resection still has the potential to bring new hope to patients with locally advanced and recurrent rectal cancer.
Humans ; Pelvic Exenteration/methods* ; Neoplasm Recurrence, Local/surgery* ; Rectum/surgery* ; Rectal Neoplasms/surgery* ; Pelvis/surgery* ; Treatment Outcome ; Retrospective Studies