In order to evaluate the safety performance of self-expandable NiTi alloy stents systematically, the dynamic safety factor drawn up by International Organization for Standardization, was used to quantitatively reflect the safety performance of stents. Based on the constitutive model of super-elastic memory alloy material in Abaqus and uniaxial tensile test data of NiTi alloy tube, finite element method and experiments on accelerated fatigue life were carried out to simulate the self-expansion process and the shape change process under the action of high and low blood pressure for three -type stents of 8×30 mm, 10×30 mm, 12×30 mm. By analyzing the changes of stress and strain of self-expanding NiTi alloy stent, the maximum stress and strain, stress concentration position, fatigue strength and possible failure modes were studied, thus the dynamic safety factor of stent was calculated. The results showed that the maximum stress and plastic strain of the stent increased with the increase of grip pressure, but the maximum stress and strain distribution area of the stent had no significant change, which were all concentrated in the inner arc between the support and the connector. The dynamic safety factors of the three stents were 1.31, 1.23 and 1.14, respectively, which indicates that the three stents have better safety and reliability, and can meet the fatigue life requirements of more than 10 years, and safety performance of the three stents decreases with the increase of stent's original diameter.
Alloys ; Finite Element Analysis ; Nickel ; Reproducibility of Results ; Self Expandable Metallic Stents ; Stress, Mechanical ; Titanium

OBJECTIVE: To construct a model for a controlled memory (CM) nickel-titanium (NiTi) file and another M-wire NiTi file with the same geometry by using finite element analysis. To evaluate the flexibility of a CM NiTi file by using three dimensional finite element method and to compare its mechanical responses with that M-wire NiTi. METHODS: Based on the reverse engineering, the 21 mm long, 25#/08 taper Hyflex NT NiTi file and Hyflex CM NiTi file were fixed by the cantilever bending model at a distance of 9.5 mm from the tip of the file. The mechanical tester's indenter was loaded/unloaded at a distance of 3 mm from the tip of the file. The maximum displacement was 3 mm, the load displacement curve was obtained. Subsequently, by using a micro-CT to scan (layer spacing of 8 μm) NiTi files, and ABAQUS (6.10) was introduced to construct a geometric model. Hyflex NT was considered as a shapememory alloy constitutive model, Hyflex CM was considered as a power-hardening plastic constitutive model, respectively. Comparing the load-displacement curve of cantilever bending in the three-dimensional finite element model with the load-displacement curve in the experiment. RESULTS: Two tetrahedral element models were constructed, the total number of nodes was 99 353 and the total number of cells was 63 744. When the loading displacement was 1 mm, the stress distribution of the cross section at 6.1 mm from the tip of the file was observed. The upper and lower surfaces were subjected to the maximum bending stress and entered the phase transformation yield stage. The finite element simulation could clearly show the deformation of the file. Various information such as deformation characteristics and stress distribution in the process were well fitted to the actual experimental curve. CONCLUSION The constitutive behavior of the material has a significant effect on the mechanical behavior of NiTi file. The finite element model established for the NiTi file of the CM wire can accurately capture the characteristics of various deformation processes of the NiTi root canal file, and it has a good fit with the actual experimental curve. The finite element model can be used for study on bending properties of CM wire.
Dental Alloys ; Equipment Design ; Finite Element Analysis ; Materials Testing ; Nickel ; Root Canal Preparation ; Stress, Mechanical ; Titanium

OBJECTIVES: This study examined the spatial distribution and the extent of soil contamination by heavy metals resulting from primitive, unconventional informal electronic waste recycling in the Agbogbloshie e-waste processing site (AEPS) in Ghana. METHODS: A total of 132 samples were collected at 100 m intervals, with a handheld global position system used in taking the location data of the soil sample points. Observing all procedural and quality assurance measures, the samples were analyzed for barium (Ba), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn), using X-ray fluorescence. Using environmental risk indices of contamination factor and degree of contamination (Cdeg), we analyzed the individual contribution of each heavy metal contamination and the overall Cdeg. We further used geostatistical techniques of spatial autocorrelation and variability to examine spatial distribution and extent of heavy metal contamination. RESULTS: Results from soil analysis showed that heavy metal concentrations were significantly higher than the Canadian Environmental Protection Agency and Dutch environmental standards. In an increasing order, Pb>Cd>Hg>Cu>Zn>Cr>Co>Ba>Ni contributed significantly to the overall Cdeg. Contamination was highest in the main working areas of burning and dismantling sites, indicating the influence of recycling activities. Geostatistical analysis also revealed that heavy metal contamination spreads beyond the main working areas to residential, recreational, farming, and commercial areas. CONCLUSIONS: Our results show that the studied heavy metals are ubiquitous within AEPS and the significantly high concentration of these metals reflect the contamination factor and Cdeg, indicating soil contamination in AEPS with the nine heavy metals studied.
Agriculture ; Barium ; Burns ; Cadmium ; Chromium ; Cobalt ; Copper ; Electronic Waste* ; Fluorescence ; Ghana* ; Metals ; Metals, Heavy* ; Nickel ; Recycling* ; Soil* ; Spatial Analysis ; United States Environmental Protection Agency ; Zinc

OBJECTIVETo evaluate the shaping ability of Reciproc, WaveOne,Mtwo and ProTaper instruments in simulated S-shaped root canals.

METHODSA total of 40 simulated S-shaped resin blocks were divided randomly into four groups, each group was prepared with Reciproc (group A), WaveOne (group B), Mtwo (group C) and ProTaper (group D), respectively. The preparation time and reduction of working length after preparation were measured. Pre- and postoperative images were obtained by a scanner and superimposed using Photoshop. Changes of coronal curve and apical curve curvature, as well as material removal from the inner and outer canal wall at 10 points beginning 1 mm from the end point of the canal, were measured using ImageJ. Centering ability was determined, accordingly. The data were analyzed using the one-way ANOVA and Student-Newman-Keuls.

RESULTSThe preparation time of group A and group B were (42.1 ± 2.7) and (41.5 ± 3.2) s respectively, significantly less than that of group C and group D [(62.7 ± 2.8), (62.8 ± 5.2) s] (P < 0.05).Reductions of working length after preparation were not significantly different among the four groups (P > 0.05). Coronal curve curvature changes of group A, group B and group D were (4.69 ± 0.63)°, (4.15 ± 0.89)° and (4.13 ± 0.59)° respectively, significantly less than that of group C[(5.26 ± 0.70)°], P < 0.05. Apical curve curvature changes were not significantly different among the four groups (P > 0.05). At the 2 mm point, the centering ability of group A[ (-0.242 ± 0.042) mm], group B[(-0.191 ± 0.077) mm], and group D[(-0.272 ± 0.046) mm] was better than group C[(-0.343 ± 0.057 mm] significantly (P < 0.05). At the 3 mm and 4 mm point, the centering ability of group A and group B was better than group C and group D significantly (P < 0.05). Whilst at the 5 mm point, the centering ability of group D was better than group A and group B (P < 0.05).

CONCLUSIONSReciproc and WaveOne could complete preparation faster and could maintain the original S-shaped canal curvature better than Mtwo and ProTaper, especially in the apical part.

Analysis of Variance ; Dental Alloys ; Dental Instruments ; Dental Pulp Cavity ; Equipment Failure ; Humans ; Nickel ; Root Canal Preparation ; Titanium

There are more than 50 000 workers in Jinchuan Group Co, Ltd (JNMC). Since all staff in JNMC are eligible for a medical examination every two years, only 23 484 nickel-exposed subjects who participated in medical examination were included in this study. Their data, collected from June 22, 2011 to September 28, 2012, in a comprehensive epidemiological survey and during medical examinations, permitted an extensive evaluation of the relation between metal exposure, gene, epigenetics and risk of human diseases. Their lifestyle investigation showed that the overall prevalence of current smokers, alcohol drinkers, and tea drinkers was 39.1%, 19.7%, and 55.2%, respectively. The prevalence of hypertension, allergic rhinitis and cholecystitis , the top 3 prevalent diseases, was 11.7%, 11.0%, and 8.9%, respectively.
Adult ; Aged ; Alcohol Drinking ; epidemiology ; Biomarkers, Tumor ; analysis ; China ; epidemiology ; Cholecystitis ; epidemiology ; Cohort Studies ; Female ; Humans ; Hypertension ; epidemiology ; etiology ; Life Style ; Male ; Middle Aged ; Neoplasms ; epidemiology ; etiology ; mortality ; Nickel ; toxicity ; Occupational Exposure ; statistics & numerical data ; Rhinitis, Allergic ; Rhinitis, Allergic, Perennial ; epidemiology ; Smoking ; epidemiology ; Young Adult

OBJECTIVES: The aim of this study was to evaluate the cytotoxicity, setting time and compressive strength of MTA and two novel tricalcium silicate-based endodontic materials, Bioaggregate (BA) and Biodentine (BD). MATERIALS AND METHODS: Cytotoxicity was evaluated by using a 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-((phenylamino)carbonyl)-2H-tetrazolium hydroxide (XTT) assay. Measurements of 9 heavy metals (arsenic, cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc) were performed by inductively coupled plasma-mass spectrometry (ICP-MS) of leachates obtained by soaking the materials in distilled water. Setting time and compressive strength tests were performed following ISO requirements. RESULTS: BA had comparable cell viability to MTA, whereas the cell viability of BD was significantly lower than that of MTA. The ICP-MS analysis revealed that BD released significantly higher amount of 5 heavy metals (arsenic, copper, iron, manganese, and zinc) than MTA and BA. The setting time of BD was significantly shorter than that of MTA and BA, and the compressive strength of BA was significantly lower than that of MTA and BD. CONCLUSIONS: BA and BD were biocompatible, and they did not show any cytotoxic effects on human periodontal ligament fibroblasts. BA showed comparable cytotoxicity to MTA but inferior physical properties. BD had somewhat higher cytotoxicity but superior physical properties than MTA.
Cadmium ; Cell Survival ; Chromium ; Compressive Strength ; Copper ; Fibroblasts ; Humans ; Iron ; Manganese ; Metals, Heavy ; Nickel ; Periodontal Ligament ; Spectrum Analysis ; Water ; Pemetrexed

BACKGROUND: Spectacle contact allergy is not infrequent. The fine scratches on the spectacle frames which may play a role in the sensitization to the potential allergenic components have not been studied. OBJECTIVE: We sought the relationship between the scratches on the spectacle frames and the allergic contact dermatitis (ACD) in the Republic of Korea. METHODS: A total of 42 Korean patients with ACD at the spectacle contact sites were enrolled. Their spectacle frames were examined with the dimethylglyoxime (DMG) test and analyzed by the scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Patch tests (thin-layer rapid use epicutaneous test [TRUE tests]) were performed to identify the skin allergens. RESULTS: The DMG-positive spectacle frames were identified in 78.5% of the frames. The SEM results showed that there were more scratches on the skin-contacting parts of the spectacle frames than the non-skin-contacting parts of the same frames. In the EDS findings, the mean nickel content (weight, %) of the spectacle frames was 15.7+/-5.5, and the mean chromium content was 20.3+/-3.4 at the skin-contacting parts. In the TRUE tests, nickel sulphate was the most common allergen (31 cases, 73.8%), and potassium dichromate was the second (9 cases, 21.4%). Three patients presented simultaneous positive reactions with nickel sulphate and potassium dichromate. CONCLUSION: Minor visible and non-visible fine scratches on the spectacle frames may present the provocation factors of the ACD. Nickel sulphate was the most common allergen suspected of provoking the spectacle frame-induced ACD, followed by potassium dichromate.
Chromium ; Dermatitis, Allergic Contact ; Humans ; Hypersensitivity ; Microscopy, Electron, Scanning ; Nickel ; Oximes ; Patch Tests ; Potassium ; Potassium Dichromate ; Skin ; Spectrum Analysis

OBJECTIVEThis study was to investigate the mechanical properties of thermodynamic nickel-titanium (NiTi) archwires of different brands under controlled temperature and in artificial saliva to provide some reference for its clinical application.

METHODSUsing a modified partial dental arch bending system, four types of thermodynamic NiTi archwires were tested under controlled temperature (25, 33, 37, 60 degrees C) and in artificial saliva. An Instron Universal Testing Machine was used to apply 3 mm deflections of archwires in the lateral incisor area. The load-deflection curves were determined from the passive position to deflections of 3 mm. The following variables from unloading curves were calculated: Stiffness between 2.5 mm UDP (unloading deflection point) to 0.5 mm UDP after unloading. Any statistically significant differences in these variables for the different brands, temperature and moments levels were analyzed using one-way analysis of variance.

RESULTSUnloading values of four types thermodynamic nickel-titanium archwires increased with controlled temperature rising. The unloading stiffness of the same brand archwires were approximate at 25, 33, 37 degrees C, while their unloading stiffness increased obviously at 60 degrees C.

CONCLUSIONDifferent brands thermodynamic NiTi archwires demonstrated different mechanical behaviours, but all of them exhibited super elasticity and practical shape memory effect. The four thermodynamic NiTi archwires displayed temperature sensitivity at the four test temperatures.

Dental Alloys ; Dental Stress Analysis ; Elasticity ; Humans ; In Vitro Techniques ; Materials Testing ; Nickel ; Orthodontic Wires ; Temperature ; Titanium

OBJECTIVETo determine the effects of water hardness on the toxicities of cobalt (Co) and nickel (Ni) to a freshwater fish, Capoeta fusca.

METHODSToxicity was investigated by static bioassay. Fish were exposed to cobalt (as CoCl(2)) and nickel (as NiCl(2)) for 96 h in waters with two levels of hardness ("hard" and "very hard", nominally 130 mg/L and 350 mg/L as CaCO(3), respectively).

RESULTSWater hardness had a significant effect on the acute toxicity of both elements. The 96 h LC(50) values for Co were 91.7 mg/L and 204.8 mg/L in hard and very hard waters, respectively, and for Ni the 96 h LC(50) values were 78.0 mg/L and 127.2 mg/L, respectively.

CONCLUSIONThe fish were more sensitive to Co and Ni toxicity in hard water than in very hard water; very hard water protects C. fusca against the toxicity of Co and Ni.

Animals ; Calcium Carbonate ; analysis ; Cobalt ; analysis ; toxicity ; Cyprinidae ; growth & development ; Environmental Monitoring ; Fresh Water ; analysis ; Iran ; Lethal Dose 50 ; Nickel ; analysis ; toxicity ; Toxicity Tests, Acute ; Water Pollutants, Chemical ; analysis ; toxicity

Many patients are currently suffering from nickel (Ni)-induced allergic contact dermatitis (ACD). There have been few Korean studies dealing with the threshold of Ni-induced ACD and quantifying the total amount of Ni in the metal alloys. The aim of this study is to evaluate the amount of Ni leached from metal alloys and Ni contents in metal alloys, and to estimate the threshold of Ni-induced ACD. All the earrings we examined leached below 0.5 microgram/cm(2)/week, the upper limit of European Union (EU) regulation, but the other metal alloys leached a much higher amount of Ni than the limit. Likewise, all the earrings we examined contained less than 0.05% Ni (500 microgram/g), the upper limit of EU regulation, but the other metal alloys exceeded this limit. Twenty Ni-sensitive subjects, who were patch-tested with various concentrations of Ni sulphate, showed positive reactions to 5% and 1% Ni sulphate, 10 subjects showed positive reactions to 0.01%, and the most sensitive subject showed reaction even to 0.0001%. The subjects in this study were more sensitive to Ni than those in the previous studies done in Europe. Taken together, strictly regulating the Ni-containing alloys that are made in Korea is needed to lower the occurrence of Ni-induced ACD.
Alloys/*chemistry ; Dermatitis, Allergic Contact/*metabolism ; Dermatitis, Contact/*diagnosis/*etiology ; European Union ; Humans ; Irritants ; Korea ; Metals/*chemistry ; Nickel/*analysis ; Patch Tests ; Petrolatum ; Quality Control ; Time Factors