Purpose: This study aimed to identify factors influencing subjective health status among individuals with spinal cord injury (SCI) using the International Classification of Functioning, Disability and Health (ICF) model. Methods: This study analyzed secondary data from the 2021 Survey on the Status and Needs of Individuals with SCI conducted by the Korea Spinal Cord Injury Association. A hierarchical multiple regression analysis was conducted in four steps. Independent variables included sociodemographic factors, satisfaction with medical services (environmental factor), the need for weight control, the need for nutritional education, the need for dietary management, and disability acceptance (personal factors) along with exercise and activity of daily living (activity and participation factors). These factors were added sequentially at each step based on the ICF model. Results: A total of 513 participants were analyzed in this study, with an average subjective health status of 5.51±2.39. Higher satisfaction with medical services (β=.27, p<.001), frequent exercise (β=.19, p=.008), and a greater level of activities of daily living (β=.02, p<.001) were significantly associated with improved subjective health status. Conversely, a lower need for nutritional education (β=-.25, p=.042) was negatively associated. Conclusion This study highlighted satisfaction with medical services, nutrition education needs, exercise frequency, and activities of daily living as important factors. These findings provide insight into how the health status of individuals with SCI can be enhanced through targeted interventions and support from healthcare providers.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: Complete revascularization has demonstrated better outcomes in patients with acute myocardial infarction (AMI) and multivessel disease. However, in the case of left main (LM) culprit lesion AMI with multivessel disease, there is limited evidence to suggest that complete revascularization is better. Methods: We reviewed 16,831 patients in the Korea Acute Myocardial Infarction Registry who were treated from July 2016 to June 2020, and 399 patients were enrolled with LM culprit lesion AMI treated with percutaneous coronary intervention. We categorized the patients as those treated with complete revascularization (n=295) or incomplete revascularization (n=104). The study endpoint was major adverse cardiac and cerebrovascular events (MACCE), a composite of all-cause death, myocardial infarction, ischemia-driven revascularization, stent thrombosis, and stroke. We performed propensity score matching (PSM) and analyzed the incidence of MACCE at 1 year. Results: After PSM, the two groups were well balanced. There was no significant difference between the two groups in MACCE at 1 year (12.1% vs. 15.2%; hazard ratio, 1.28; 95% confidence interval, 0.60–2.74; p=0.524) after PSM. The components of MACCE and major bleeding were also not significantly different. Conclusion There was no significant difference in clinical outcomes between the groups treated with complete or incomplete revascularization for LM culprit lesion AMI with multivessel disease.

Background and Objectives: Several real-world studies have been done in patients with nonvalvular atrial fibrillation (NVAF); however, information on its safety profile in patients with renal impairment is limited. XARENAL, a real-world study, aimed to prospectively investigate the safety profile of rivaroxaban in patients with NVAF with renal impairment (creatinine clearance [CrCl], 15–49 mL/min). Methods: XARENAL is an observational single-arm cohort study in renal impairment NVAF patients. Patients were followed up approximately every 3 months for 1 year or until 30 days following early discontinuation. The primary endpoint was major bleeding events. All adverse events, symptomatic thromboembolic events, treatment duration, and renal function change from baseline were the secondary endpoints. Results: XARENAL included 888 patients from 29 study sites. Overall, 713 (80.3%) had moderate renal impairment (CrCl, 30–49 mL/min), and 175 (19.7%) had severe renal impairment (CrCl, 15–29 mL/min) with a mean estimated glomerular filtration rate (eGFR) of 45.2±13.0 mL/min/1.73 m 2 . The mean risk scores were 3.3±1.4 and 1.7±0.9 for CHA 2 DS 2 -VASc score and HAS-BLED score, respectively. An incidence proportion of 5.6% (6.2 events per 100 patient-years) developed major bleeding; however, fatal bleeding occurred in 0.5% (0.5 events per 100 patient-years). The mean change in the eGFR was 2.22±26.47 mL/min/1.73 m 2 per year. Conclusions XARENAL observed no meaningful differences in major bleeding events from other previous findings as well as renal function changes in rivaroxaban-treated NVAF patients with renal impairment, which is considered to be acceptable in clinical practice.

The initial molecular cytogenetic characteristics of blasts plays a significant role in determining the treatment course of B-cell acute lymphoblastic leukemia (B-ALL).B-ALL with intrachromosomal amplification of chromosome 21 (iAMP21) has been well known to have unfavorable prognosis. Also, there are previously recognized germline mutations that increase the risk of ALL, such as trisomy 21, Down syndrome. This case report is about a 16-year-old girl who presented with lymphadenitis, purpura, and fever followed by initial lab of elevated white blood cell with blasts.She had some notable facial features, but no typical Down syndrome related one.Bone marrow biopsy and fluorescence in situ hybridization finalized the diagnosis as B-ALL with iAMP21, high-risk group. The minimal residual disease-negative complete remission was achieved after the induction chemotherapy with Korean multicenter high-risk protocol. However, abnormal karyotype was sustained in bone marrow. Microarrays with her buccal swab raised the possibility that the abnormal karyotype was not from the leukemic blasts but rather from the germline. Although she underwent scheduled chemotherapy uneventfully as slow early responder type, thrombocytopenia and abnormal karyotype persisted, leading to the diagnosis of acute myeloid leukemia. Additional chemotherapy and peripheral blood stem cell transplantation was performed which resulted in engraftment. This case highlights the discovery of a constitutional genetic aberration, which played like a silent yet critical background factor for B-ALL with iAMP21. As the number of reported cases are limited, the role of germline chromosome 21 mutation as the indicator for prognosis of B-ALL should be studied further.

Purpose: The Korean Cancer Study Group (KCSG) is a nationwide cancer clinical trial group dedicated to advancing investigator-initiated trials (IITs) by conducting and supporting clinical trials. This study aims to review IITs conducted by KCSG and quantitatively evaluate the survival and financial benefits of IITs for patients. Materials and Methods: We reviewed IITs conducted by KCSG from 1998 to 2023, analyzing progression-free survival (PFS) and overall survival (OS) gains for participants. PFS and OS benefits were calculated as the difference in median survival times between the intervention and control groups, multiplied by the number of patients in the intervention group. Financial benefits were assessed based on the cost of investigational products provided. Results: From 1998 to 2023, KCSG conducted 310 IITs, with 133 completed and published. Of these, 21 were included in the survival analysis. The analysis revealed that 1,951 patients in the intervention groups gained a total of 2,558.4 months (213.2 years) of PFS and 2,501.6 months (208.5 years) of OS, with median gains of 1.31 months in PFS and 1.58 months in OS per patient. When analyzing only statistically significant results, PFS and OS gain per patients was 1.69 months and 3.02 months, respectively. Investigational drug cost analysis from six available IITs indicated that investigational products provided to 252 patients were valued at 10,400,077,294 won (approximately 8,046,481 US dollars), averaging about 41,270,148 won (approximately 31,930 US dollars) per patient. Conclusion Our findings, based on analysis of published research, suggest that IITs conducted by KCSG led to survival benefits for participants and, in some studies, may have provided financial benefits by providing investment drugs.

Purpose: This study aimed to identify factors influencing subjective health status among individuals with spinal cord injury (SCI) using the International Classification of Functioning, Disability and Health (ICF) model. Methods: This study analyzed secondary data from the 2021 Survey on the Status and Needs of Individuals with SCI conducted by the Korea Spinal Cord Injury Association. A hierarchical multiple regression analysis was conducted in four steps. Independent variables included sociodemographic factors, satisfaction with medical services (environmental factor), the need for weight control, the need for nutritional education, the need for dietary management, and disability acceptance (personal factors) along with exercise and activity of daily living (activity and participation factors). These factors were added sequentially at each step based on the ICF model. Results: A total of 513 participants were analyzed in this study, with an average subjective health status of 5.51±2.39. Higher satisfaction with medical services (β=.27, p<.001), frequent exercise (β=.19, p=.008), and a greater level of activities of daily living (β=.02, p<.001) were significantly associated with improved subjective health status. Conversely, a lower need for nutritional education (β=-.25, p=.042) was negatively associated. Conclusion This study highlighted satisfaction with medical services, nutrition education needs, exercise frequency, and activities of daily living as important factors. These findings provide insight into how the health status of individuals with SCI can be enhanced through targeted interventions and support from healthcare providers.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.