PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background and Objectives: The Fractional Flow Reserve and Intravascular UltrasoundGuided Intervention Strategy for Clinical Outcomes in Patients with Intermediate Stenosis (FLAVOUR) trial demonstrated non-inferiority of fractional flow reserve (FFR)-guided percutaneous coronary intervention (PCI) compared with intravascular ultrasound (IVUS)-guided PCI. We sought to investigate the cost-effectiveness of FFR-guided PCI compared to IVUS-guided PCI in Korea. Methods: A 2-part cost-effectiveness model, composed of a short-term decision tree model and a long-term Markov model, was developed for patients who underwent PCI to treat intermediate stenosis (40% to 70% stenosis by visual estimation on coronary angiography).The lifetime healthcare costs and quality-adjusted life-years (QALYs) were estimated from the healthcare system perspective. Transition probabilities were mainly referred from the FLAVOUR trial, and healthcare costs were mainly obtained through analysis of Korean National Health Insurance claims data. Health utilities were mainly obtained from the Seattle Angina Questionnaire responses of FLAVOUR trial participants mapped to EQ-5D. Results: From the Korean healthcare system perspective, the base-case analysis showed that FFR-guided PCI was 2,451 U.S. dollar lower in lifetime healthcare costs and 0.178 higher in QALYs compared to IVUS-guided PCI. FFR-guided PCI remained more likely to be cost-effective over a wide range of willingness-to-pay thresholds in the probabilistic sensitivity analysis. Conclusions Based on the results from the FLAVOUR trial, FFR-guided PCI is projected to decrease lifetime healthcare costs and increase QALYs compared with IVUS-guided PCI in intermediate coronary lesion, and it is a dominant strategy in Korea.

Ketone bodies produced by sodium-glucose cotransporter 2 (SGLT2) inhibitors can be advantageous, providing an efficient and stable energy source for the brain and muscles. However, in patients with diabetes, ketogenesis induced by SGLT2 inhibitors may be harmful, potentially resulting in severe diabetic ketoacidosis (DKA). During fasting, ketone body production serves as an alternative and efficient energy source for the brain by utilizing stored fat, promoting mental clarity, and reducing dependence on glucose. The concurrent use of SGLT2 inhibitors during perioperative fasting may further elevate the risk of euglycemic DKA. We describe a case of DKA that occurred during perioperative fasting in a patient receiving empagliflozin, an SGLT2 inhibitor. This case underscores the importance of recognizing the potential risk of DKA in patients with diabetes using SGLT2 inhibitors during perioperative fasting.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background and Objectives: The Fractional Flow Reserve and Intravascular UltrasoundGuided Intervention Strategy for Clinical Outcomes in Patients with Intermediate Stenosis (FLAVOUR) trial demonstrated non-inferiority of fractional flow reserve (FFR)-guided percutaneous coronary intervention (PCI) compared with intravascular ultrasound (IVUS)-guided PCI. We sought to investigate the cost-effectiveness of FFR-guided PCI compared to IVUS-guided PCI in Korea. Methods: A 2-part cost-effectiveness model, composed of a short-term decision tree model and a long-term Markov model, was developed for patients who underwent PCI to treat intermediate stenosis (40% to 70% stenosis by visual estimation on coronary angiography).The lifetime healthcare costs and quality-adjusted life-years (QALYs) were estimated from the healthcare system perspective. Transition probabilities were mainly referred from the FLAVOUR trial, and healthcare costs were mainly obtained through analysis of Korean National Health Insurance claims data. Health utilities were mainly obtained from the Seattle Angina Questionnaire responses of FLAVOUR trial participants mapped to EQ-5D. Results: From the Korean healthcare system perspective, the base-case analysis showed that FFR-guided PCI was 2,451 U.S. dollar lower in lifetime healthcare costs and 0.178 higher in QALYs compared to IVUS-guided PCI. FFR-guided PCI remained more likely to be cost-effective over a wide range of willingness-to-pay thresholds in the probabilistic sensitivity analysis. Conclusions Based on the results from the FLAVOUR trial, FFR-guided PCI is projected to decrease lifetime healthcare costs and increase QALYs compared with IVUS-guided PCI in intermediate coronary lesion, and it is a dominant strategy in Korea.

Ketone bodies produced by sodium-glucose cotransporter 2 (SGLT2) inhibitors can be advantageous, providing an efficient and stable energy source for the brain and muscles. However, in patients with diabetes, ketogenesis induced by SGLT2 inhibitors may be harmful, potentially resulting in severe diabetic ketoacidosis (DKA). During fasting, ketone body production serves as an alternative and efficient energy source for the brain by utilizing stored fat, promoting mental clarity, and reducing dependence on glucose. The concurrent use of SGLT2 inhibitors during perioperative fasting may further elevate the risk of euglycemic DKA. We describe a case of DKA that occurred during perioperative fasting in a patient receiving empagliflozin, an SGLT2 inhibitor. This case underscores the importance of recognizing the potential risk of DKA in patients with diabetes using SGLT2 inhibitors during perioperative fasting.

This study explored the evolving trends in pediatric dentistry research, focusing on the changes in research trends in the Journal of the Korean Academy of Pediatric Dentistry (JKAPD) and comparing them with those in other international journals and previous studies. We selected the JKAPD (Korea), Pediatric Dentistry (PD, USA), European Archives of Paediatric Dentistry (EAPD, Europe), and The Japanese Journal of Pediatric Dentistry (JJPD, Japan) as subjects for this study, as each one is considered the core academic journals of the corresponding region. Data from the four journals were collected by reviewing articles published over 20 years from 2004 to 2023. Sixteen classification criteria were established, and 4,231 papers were assigned a classification number. This study included 1,205 studies from the JKAPD, 1,320 from the PD, 1,070 from the EAPD, and 636 from the JJPD. Publication trends were similar across the pediatric dental journals; however, the JJPD showed no correlation with other journals. Dental caries and prevention of dental caries were the most published topics in all journals (15.4%), followed by systemic diseases or patients with special health care needs (9.9%), conservative treatment and restorative materials (9.2%), and dental growth and developmental disturbances (8.8%). The thematic distribution of articles in the JKAPD observed in this study is consistent with that of previous studies. Although there were regional variations, the distribution of publication trends did not significantly change before or after the 21st century. This study offers valuable insights for comparing and analyzing trends in domestic and international research and providing an opportunity to examine which social and environmental changes have influenced these trends.

This study investigated the plaque removal efficacy of a suction-type sonic toothbrush compared to a conventional manual toothbrush in preschool children aged 30 to 59 months. Using a randomized, double-blind, crossover design with a 2-week washout period, 20 pediatric participants were allocated to two study phases, each using either the suction-type sonic toothbrush or the manual toothbrush with caregiver assistance. The plaque removal effectiveness was assessed through the Silness and Löe plaque index and quantitative light-induced fluorescence values, including ΔR30 and ΔR120 indicators of plaque index. The result showed no statistically significant differences in plaque removal efficacy between the two toothbrushes, although both showed similar improvements. Caregiver feedback revealed high acceptability of the suction-type sonic toothbrush due to its convenience and engaging features, such as a light and suction function, which enhanced the tooth brushing experience. Although limited by the short follow-up period and small sample size, the findings suggest that suction-type sonic toothbrushes may offer practical benefits for young children requiring caregiver assistance.