PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Purpose: We present a case of central anticholinergic syndrome following the administration of atropine eye drops.Case summary: A 60-year-old male presented with decreased visual acuity in his left eye and was diagnosed with intraocular lens dislocation. Preoperatively, Isopto atropine® eye drops (1 drop at 15-minutes intervals) were used for pupil dilation. Within an hour of the first instillation, the patient exhibited drowsiness, disorientation, agitation, and urinary retention. Laboratory tests and computed tomography of the brain were unremarkable. Considering the recent administration of atropine eye drops, a diagnosis of central anticholinergic syndrome was made. The surgery was postponed and the patient recovered fully after 3 hours of observation. He remained asymptomatic during an additional day of hospitalization. Conclusions A small dose of atropine eye drops even at a therapeutic dose can induce central anticholinergic syndrome. Therefore, ophthalmologists should be aware of this rare and severe complication.

Purpose: This study investigated the efficacy of intravesical gemcitabine as an alternative to bacillus Calmette–Guérin (BCG) therapy. Materials and Methods: Data were retrospectively collected across seven institutions from February 1999 to May 2023. Inclusion criteria included patients with intermediate- or high-risk non-muscle invasive bladder cancer (NMIBC) who underwent transurethral resection of bladder tumors (TURBT) and received at least four sessions of intravesical gemcitabine or BCG induction therapy. Patient characteristics, complete remission (CR), occurrence, and progression rates were compared. Results: In total, 149 patients were included in this study (gemcitabine, 63; BCG, 86). No differences were apparent between the two groups in baseline characteristics, except for the follow-up period (gemcitabine, 9.2±5.9 months vs. BCG, 43.9±41.4 months, p<0.001). There were no consistent significant differences observed between the two groups in the 3-month (gemcitabine, 98.4% vs. BCG, 95.3%; p=0.848), 6-month (94.9% vs. 90.0%, respectively; p=0.793) and 1-year CR rates (84.2% vs. 83.3%, respectively;p=0.950). Also, there was no significant statistical difference in progression-free survival between the two groups (p=0.953). The occurrence rates of adverse events were similar between the groups (22.2% vs. 22.1%; p=0.989); however, the rate of Clavien– Dindo grade 2 or higher was significantly higher in the BCG group (1.6% vs. 16.3%, respectively; p<0.001). Conclusions Intravesical gemcitabine demonstrated efficacy comparable to BCG therapy for the first year in patients with intermediate- and high-risk NMIBC. However, long-term follow-up studies are warranted.

Purpose: We present a case of central anticholinergic syndrome following the administration of atropine eye drops.Case summary: A 60-year-old male presented with decreased visual acuity in his left eye and was diagnosed with intraocular lens dislocation. Preoperatively, Isopto atropine® eye drops (1 drop at 15-minutes intervals) were used for pupil dilation. Within an hour of the first instillation, the patient exhibited drowsiness, disorientation, agitation, and urinary retention. Laboratory tests and computed tomography of the brain were unremarkable. Considering the recent administration of atropine eye drops, a diagnosis of central anticholinergic syndrome was made. The surgery was postponed and the patient recovered fully after 3 hours of observation. He remained asymptomatic during an additional day of hospitalization. Conclusions A small dose of atropine eye drops even at a therapeutic dose can induce central anticholinergic syndrome. Therefore, ophthalmologists should be aware of this rare and severe complication.

Purpose: We present a case of central anticholinergic syndrome following the administration of atropine eye drops.Case summary: A 60-year-old male presented with decreased visual acuity in his left eye and was diagnosed with intraocular lens dislocation. Preoperatively, Isopto atropine® eye drops (1 drop at 15-minutes intervals) were used for pupil dilation. Within an hour of the first instillation, the patient exhibited drowsiness, disorientation, agitation, and urinary retention. Laboratory tests and computed tomography of the brain were unremarkable. Considering the recent administration of atropine eye drops, a diagnosis of central anticholinergic syndrome was made. The surgery was postponed and the patient recovered fully after 3 hours of observation. He remained asymptomatic during an additional day of hospitalization. Conclusions A small dose of atropine eye drops even at a therapeutic dose can induce central anticholinergic syndrome. Therefore, ophthalmologists should be aware of this rare and severe complication.

Purpose: This study aims to explore the relationship between soy food consumption and gastric cancer (GC) risk, accounting for Helicobacter pylori infection status. Materials and Methods: We analyzed data from patients with GC and healthy individuals prospectively enrolled by 6 hospitals between 2016 and 2018. Dietary intake was evaluated using questionnaires that categorized seven dietary habits and 19 food groups. Multivariate logistic regression models were applied to examine associations. Model I adjusted for various epidemiological factors, while Model II included further adjustments for H. pylori infection.Primary exposures examined were consumption frequencies of nonfermented, unsalted soy foods (soybean/tofu) and fermented, salty soy foods (soybean paste stew). Results: A total of 5,535 participants were included, with 1,629 diagnosed with GC. In Model I, the frequency of soybean/tofu consumption was inversely related to GC risk; adjusted odd ratios (aORs) were 0.62 (95% confidence interval [CI], 0.48–0.8), 0.38 (95% CI, 0.3–0.49), 0.42 (95% CI, 0.33–0.53), and 0.33 (95% CI, 0.27–0.42) for 1 time/week, 2 times/week, 3 times/week, and ≥4 times/week. Consumption of 2 servings/week of soybean paste stew showed the lowest GC association, forming a V-shaped curve. Both low (aOR, 4.03; 95% CI, 3.09–5.26) and high serving frequencies of soybean paste stew (aOR, 2.23; 95% CI, 1.76–2.82) were associated with GC. The association between soy foods and GC in Model II was similar to that in Model I. The soy food-GC associations were consistent across sexes in Model I.Nonetheless, the positive correlation between frequent consumption of soybean paste stew (≥5 times/week) and GC was more pronounced in women (aOR, 7.58; 95% CI, 3.20–17.99) compared to men (aOR, 3.03; 95% CI, 1.61–5.88) in Model II. Subgroup analyses by H. pylori status and salty diet revealed a consistent inverse relationship between soybean/tofu and GC risk. In contrast, soybean paste stew showed a V-shaped relationship in H. pylori-positive or salty diet groups and no significant association in the H. pylori-negative group. Conclusions Soybean/tofu intake is consistently associated with a decreased risk of GC.However, the relationship between soybean paste stew consumption and GC risk varies, depending on H. pylori infection status and dietary salt intake.