PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

There are various methods for restoring the dentition of completely edentulous patients. Removable complete dentures have the advantage of being relatively economical, but they can be uncomfortable to wear. With the introduction of implant prosthodontics, various options such as implant-supported overdentures and hybrid prostheses have become available. If there is inadequate remaining ridge or limited financial resources, an overdenture supported by a few implants with additional attachments may be more suitable. In this case, due to severe peri-implantitis and other complications, the implants were removed. Subsequently, four implants (two on each side) were placed in the maxilla and a milledbar with attachment was fabricated for each side of the maxilla.

. The findings indicate that analog facebow transfer produced a linear deviation ranging from 3 to 16 mm and an angular deviation of the occlusal plane between 5 to 7 degrees. This case report confirms that, across two patients, analog facebow transfer can result in varying degrees of positional deviation, thereby potentially leading to inaccuracies in the fabrication of dental pros-theses. These results suggest that, in clinical practice, the use of analog facebow transfer may yield significant deviations during the process of mounting maxillary casts.

Purpose: This study aimed to validate the Sheffield Profile for Assessment and Referral to Care (SPARC) as an effective tool for screening palliative care needs among Korean cancer patients. Materials and Methods: The English version of the SPARC was translated by four Korean oncologists and reconciled by a Korean language specialist and a medical oncologist fluent in English. After the first version of the Korean SPARC (K-SPARC) was developed, back-translation into English was performed by a professional translator and bilingual oncologist. The back-translated version was reviewed by the original author (S.H.A.), and modifications were made (ver. 2). The second version of the K-SPARC was tested against other questionnaires, including the Functional Assessment of Cancer Therapy-General (FACT-G) and the Edmonton Symptom Assessment System (ESAS). Results: Thirty patients were enrolled in the pilot trial. Fifteen were male, and the median age was 64.5 years. Six patients had an Eastern Cooperative Oncology Group performance status of 2 or more. All patients except one were receiving chemotherapy. Regarding internal consistency, the Cronbach’s α scores for physical symptoms, psychological issues, religious and spiritual issues, independency and activity, family and social issues, and treatment issues were 0.812, 0.804, 0.589, 0.843, 0.754, and 0.822, respectively. The correlation coefficients between the SPARC and FACT-G were 0.479 (p=0.007) for the physical domain and –0.130 (p=0.493) for the social domain. Conclusion This pilot study indicates that the K-SPARC could be a reliable tool to screen for palliative care needs among Korean cancer patients. A further study to validate our findings is ongoing.

PURPOSE: To report a case of rapid progression of the epiretinal membrane following intravitreal aflibercept injection in a patient with exudative age-related macular degeneration. CASE SUMMARY: An 82-year-old female presented with a complaint of decreased visual acuity in her left eye for 1 month. The initial best-corrected visual acuity was 0.2 in the left eye. Fundus examination and optical coherence tomography revealed soft drusen with retinal hemorrhage of the macula and a transparent epiretinal membrane in the left eye. Fluorescein angiography and indocyanine green angiography showed retinal angiomatous proliferation (RAP) of the left eye, so intravitreal aflibercept injection was performed. One month after the first injection, intraretinal cystic macular edema decreased, while transparency of the epiretinal membrane decreased and reflectivity and thickness of the membrane increased. After two additional injections of aflibercept, RAP showed improvement, whereas the epiretinal membrane progressed. Visual acuity of the left eye decreased to 0.1 and vitrectomy of the membrane was performed. CONCLUSIONS: Careful observation for potentially rapid progression of epiretinal membrane is needed after intravitreal aflibercept injection in the management of exudate age-related macular degeneration accompanied by epiretinal membrane.
Aged, 80 and over ; Angiography ; Epiretinal Membrane ; Exudates and Transudates ; Female ; Fluorescein Angiography ; Humans ; Indocyanine Green ; Macular Degeneration ; Macular Edema ; Membranes ; Retinal Hemorrhage ; Retinaldehyde ; Tomography, Optical Coherence ; Visual Acuity ; Vitrectomy

The molecular mechanism underlying the initiation of somatic cell reprogramming into induced pluripotent stem cells (iPSCs) has not been well described. Thus, we generated single-cell-derived clones by using a combination of drug-inducible vectors encoding transcription factors (Oct4, Sox2, Klf4 and Myc) and a single-cell expansion strategy. This system achieved a high reprogramming efficiency after metabolic and epigenetic remodeling. Functional analyses of the cloned cells revealed that extracellular signal-regulated kinase (ERK) signaling was downregulated at an early stage of reprogramming and that its inhibition was a driving force for iPSC formation. Among the reprogramming factors, Myc predominantly induced ERK suppression. ERK inhibition upregulated the conversion of somatic cells into iPSCs through concomitant suppression of serum response factor (SRF). Conversely, SRF activation suppressed the reprogramming induced by ERK inhibition and negatively regulated embryonic pluripotency by inducing differentiation via upregulation of immediate early genes, such as c-Jun, c-Fos and EGR1. These data reveal that suppression of the ERK-SRF axis is an initial molecular event that facilitates iPSC formation and may be a useful surrogate marker for cellular reprogramming.