Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

Objective To explore the influencing factors of coronary artery lesion severity in patients with acute coronary syndrome (ACS). Methods Clinical data of ACS patients admitted to Zhongshan Hospital, Fudan University from December 2017 to December 2019 were consecutively collected. The modified Gensini score was used to assess the severity of coronary artery lesions. Univariate and multivariate linear regression analyses were performed to identify independent factors associated with coronary artery lesion severity. Results A total of 1 689 ACS patients were included, with an average age of (64.04±11.45) years; 1 353 (80.11%) were male, and the mean modified Gensini score was (8.12±4.03). Multivariate linear regression analysis revealed that sex (β＝0.97, P＝0.001), age (β＝0.03, P＝0.021), estimated glomerular filtration rate (eGFR; β＝－0.03, P＜0.001), low-density lipoprotein cholesterol (LDL-C; β＝0.58, P＜0.001), apolipoprotein A1 (Apo A1; β＝－1.28, P＝0.012), lipoprotein(a) [Lp(a); β＝0.001, P＝0.033], and glycated hemoglobin A_1C (HbA_1C; β＝0.45, P＜0.001) were independent influencing factors of the modified Gensini score. Conclusions Metabolic indicators, including Apo A1, LDL-C, HbA_1C, and Lp(a), may serve as risk factors for coronary artery lesion severity in ACS patients, with Apo A1 demonstrating the strongest impact.

Objective: To investigate the efficacy and safety of robot-assisted modified Y-shaped ileal orthotopic neobladder reconstruction，so as to provide reference for clinical practice. Methods: The clinical data of 44 patients who underwent robot-assisted laparoscopic radical cystectomy，lymph node dissection，and modified Y-shaped ileal orthotopic neobladder reconstruction during Feb.2020 and Aug.2022 were retrospectively analyzed.The surgical position，Trocar position，and key surgical steps were reported.The perioperative conditions，postoperative complications，neobladder volume，maximum urinary flow rate，postvoid residual，renal function，and urinary control function were recorded. Results: All 44 surgeries were successfully completed，with operation time of (314.32±51.02) min，modified Y-shaped ileal orthotopic neobladder reconstruction time of (103.52±9.56) min，and bleeding volume of (128.18±57.27) mL.The postoperative time for fluid intake was (4.16±0.86) days，catheter indwelling time was (14.02±3.20) days，and patients were discharged 1 to 2 days after catheter removal.Clavien-Dindo grade Ⅱ and Ⅲ complications occurred in 15 and 2 patients，respectively.During the follow-up of (20.77±5.90) months，dysuria occurred in 1 case，urethral calculi in 2 cases，and incomplete bowel obstruction in 2 cases. The postoperative neobladder capacity was (195.75±15.51) mL，maximal urinary flow rate (20.30±2.05) mL/s，postvoid residual (19.86±13.80) mL and serum creatinine (81.98±25.97) μmol/L. The incidence of daytime and nocturnal urinary incontinence 3，6 and 12 months after operation were 20.45% and 29.55%，11.36% and 18.18%，and 4.55% and 9.09%，respectively. Conclusion: Robot-assisted modified Y-shaped ileal orthotopic neobladder reconstruction has favorable efficacy and safety，and low incidence of postoperative complications，which can be applied in clinical practice.

Aim To investigate the therapeutic effect of the MW-9 on ulcerative colitis(UC)and reveal the underlying mechanism, so as to provide a scientific guidance for the MW-9 treatment of UC. Methods The model of lipopolysaccharide(LPS)-stimulated RAW264.7 macrophage cells was established. The effect of MW-9 on RAW264.7 cells viability was detected by MTT assay. The levels of nitric oxide(NO)in RAW264.7 macrophages were measured by Griess assay. Cell supernatants and serum levels of inflammatory cytokines containing IL-6, TNF-α and IL-1β were determined by ELISA kits. Dextran sulfate sodium(DSS)-induced UC model in mice was established and body weight of mice in each group was measured. The histopathological damage degree of colonic tissue was assessed by HE staining. The protein expression of p-p38, p-ERK1/2 and p-JNK was detected by Western blot. Results MW-9 intervention significantly inhibited NO release in RAW264.7 macrophages with IC50 of 20.47 mg·L-1 and decreased the overproduction of inflammatory factors IL-6, IL-1β and TNF-α(P<0.05). MW-9 had no cytotoxicity at the concentrations below 6 mg·L-1. After MW-9 treatment, mouse body weight was gradually reduced, and the serum IL-6, IL-1β and TNF-α levels were significantly down-regulated. Compared with the model group, MW-9 significantly decreased the expression of p-p38 and p-ERK1/2 protein. Conclusions MW-9 has significant anti-inflammatory activities both in vitro and in vivo, and its underlying mechanism for the treatment of UC may be associated with the inhibition of MAPK signaling pathway.

In this study, fluvoxamine maleate sustained-release pellet system tablets were prepared and were used to evaluate their release behaviors in vitro. Fluvoxamine maleate pellets were prepared using centrifugal-spherization method and coated by fluidized bed as bottom-spray. The multi-unit sustained-release pellets and appropriate excipients for prescription volumes were mixed uniformly and then compressed to tablets. Screening and determining the optimal formulation of drug loaded pellets through L8 (2⁴) Taguchi experiment. Using Minitab software to design a DOE experiment with 2⁴ partial factors, including material temperature, fan speed, atomization pressure, and spray rate to optimize the bottom spray coating process. Taking monostearate glycerol ester with a particle size of 24-40 mesh as the main diluent for tableting to relieve the delamination phenomenon between pellets and excipients during tablet pressing and reduce mechanical damage to the coating film. By examining the powder fluidity indexes such as angle of repose, bulk density, tapped density, and Hausner ratio of mixed particles, it was found that the flowability and compressibility are good and suitable for direct compression. Evaluate the basic properties of the sustained-release tablets, investigate the in vitro release behavior and study the release mechanism. The results of in vitro release test showed that the self-made sustained-release tablets could disintegrate into independent pellet units in phosphate buffer at pH 6.8 and release slowly within 24 h, which conformed to the first-order drug release model. The fluvoxamine maleate sustained-release pellet system tablets meet the requirements of preparation design and has a great commercial prospect.

Objective To understand the epidemiological characteristics of scrub typhus disease and to provide a scientific basis for the prevention and control of scrub typhus disease. Methods Descriptive epidemiological methods were used to analyze the population and regional distribution of scrub typhus. Seasonal characteristics were analyzed using concentration method and circular distribution method, and incidence trend was analyzed using joinpoint regression model. Results The annual incidence rate of scrub typhus was 0.95/100 000 from 2010 to 2022. The incidence rate of male was 0.77/100 000, lower than that of female 1.12/100 000 (χ²=18.89, P<0.05). The incidence rate of the 60-74 years old group was 3.38/100,000, and the total number of cases in the age group 45-74 years was 416 (74.95%). Occupational distribution was mainly among farmers, with 448 cases (80.72%). The top three regions with the highest number of reported cases (in order: Donghai County, Ganyu District, and Guannan County) reported a total of 416 cases, accounting for 74.95%. Concentration ratio was M=0.9408, and the incidence of scrub typhus disease was strictly seasonal. Circular distribution results showed a^-=-62.3728, S=20.8960. The circular distribution results indicated that the peak day was October 19th, and the peak period was between October 7 to December 19. The average annual percentage change (AAPC) of the incidence rate from 2010 to 2022 was 13.70%, 95% CI (-8.62%~41.48%), and the incidence rate showed an upward trend (t=1.15, P=0.249). Conclusion The incidence of scrub typhus disease is strictly seasonal, and the incidence rate over the years shows an upward trend. It is necessary to strengthen monitoring and take various intervention measures to reduce the risk of scrub typhus disease.

In the field of dental aesthetics,digital aesthetic design plays a crucial role in helping dentists to predict treatment outcomes vis-ually,as well as in enhancing the consistency of knowledge and understanding of aesthetic goals between dentists and patients.It serves as the foundation for achieving ideal aesthetic effects.However,there is no clear standard for this digital process currently in China and abroad.Many dentists lack of systematic understanding of how to carry out digital aesthetic design for treatment.To establish standardized processes for dental aesthetic design and to improve the homogeneity of treatment outcomes,Chinese Society of Digital Dental Industry(CSD-DI)convened domestic experts in related field to compile this consensus.This article elaborates on the key aspects of digital aesthetic data collection,integration steps,and the digital aesthetic design process.It also formulates a decision tree for dental aesthetics at macro level and outlines corresponding workflows for various clinical scenarios,serving as a reference for clinicians.

ObjectiveTo explore the scientific connotation of fried charcoal survivability of Lonicerae Japonicae Flos（LJF） by analyzing the correlation between the color change and the intrinsic components during the processing of LJF Carbonisata（LJFC）， and taking pH， charcoal adsorption and microscopic characteristics as indexes. MethodLJFC samples with different degrees of processing were prepared according to the stir-frying time of 0.0， 1.5， 3.0， 4.5， 6.0， 7.5， 9.0， 10.5 min（numbered S1-S8）， and the contents of gallic acid， chlorogenic acid， cryptochlorogenic acid， rutin， luteoloside， isochlorogenic acid A and isochlorogenic acid C were determined by high performance liquid chromatography（HPLC）， and the L^*（brightness）， a^*（red-greenness） and b^*（yellow-blueness） of LJFC samples with different degrees of processing were determined by spectrophotometer， and the correlation analysis and principal component analysis（PCA） between the contents of seven representative components and the color of the samples were carried out by SPSS 26. 0 and SIMCA-P 14.1. Then pH， adsorption force and characteristic structure of different samples of LJFC were detected and the processing pattern of LJFC was analyzed. ResultThe results of quantitative analysis revealed that the contents of luteoloside， rutin， chlorogenic acid and isochlorogenic acid A gradually decreased， and the contents of cryptochlorogenic acid， isochlorogenic acid C and gallic acid firstly increased and then decreased. The L^* and b^* of the sample powders decreased， and a^* showed a trend of increasing and then decreasing. The L^* and b^* were positively correlated with the contents of chlorogenic acid， rutin， luteoloside， isochlorogenic acid A， b^* was positively correlated with the content of gallic acid， and a^* was positively correlated with the contents of cryptochlorogenic acid and isochlorogenic acid C. PCA revealed that samples could be clearly divided into 3 groups， S1-S2 as one group， S3-S5 as one group， and S6-S8 as one group， with S3 having the highest score. The results of regression analysis showed that only isochlorogenic acid C could be used to predict the contents of components by colorimetric values combined with regression equations. Physicochemical analysis showed that pH of LJFC increased with the increase of degree of charcoal stir-frying， while adsorption force showed a tendency of increasing and then decreasing， with the highest adsorption force in the S5 sample， and the non-glandular hairs， calcium oxalate clusters and pollen grains had a varying degree of decreasing with the deepening of processing degree， and the microstructures of S6-S8 samples were obviously charred with pollen grains almost invisible. ConclusionThe changes in chemical composition and color characteristics of LJFC during the processing have certain correlations， combined with the changes in physicochemical properties， S5 sample is found to be the optimal processed products， which can provide a reference for the processing standardization and quality evaluation of LJFC， and enrich the scientific connotation of fried charcoal survivability of LJF.

ObjectiveTo investigate the effect of Yiqi Tongxin formula （YQTM） on liver inflammation in apolipoprotein E^-∕- （ApoE^-∕-） mice by regulating the nuclear transcription factor-κB （NF-κB）/NOD-like receptor protein 3 （NLRP3） signaling pathway. MethodForty ApoE^-∕- mice were randomly divided into a model group， an atorvastatin group （positive drug group）， and low-， medium-， and high-dose YQTM groups （0.39， 0.78， 1.56 g·kg^-1）. Each drug administration group was given the corresponding concentration of the drug by gavage on the basis of high-fat feeding for 12 consecutive weeks. Eight C57BL/6J mice were used as a blank group and fed with normal chow. After 12 weeks， oil red O staining and Masson staining were used to observe the aortic lesions in mice and to determine whether the modeling was successful. Oil red O staining was used to observe the lipidosis in the livers of mice. Hematoxylin-eosin （HE） staining was used to observe the tissue lesions in the livers of mice. Masson staining was used to observe the distribution of collagen fibers in the livers of mice. Enzyme markers were used to detect the total cholesterol （TC）， triglyceride （TG）， low-density lipoprotein （LDL-C）， aspartate aminotransferase （AST）， and alanine aminotransferase （ALT） in mouse serum， as well as total cholesterol （TC） and triglyceride （TG） in the liver. Interleukin-1β （IL-1β） and IL-18 were detected in mouse liver by enzyme-linked immunosorbent assay （ELISA）. Immunohistochemistry （IHC） was utilized to observe the expression regions of NF-κB and NLRP3 in the livers of mice. Western blot was employed to detect the protein expression levels of NF-κB， NF-κB inhibitory protein （IκB）， IκB kinase β （IKKβ）， phosphorylated NF-κB （p-NF-κB）， phosphorylated IκB （p-IκB）， phosphorylated IKK β （p-IKKβ）， NLRP3， and Caspase-1 in the livers of mice. ResultCompared with the blank group， the model group showed severe aortic lipidosis， and the intracellular fat droplets in the livers aggregated in large quantities. The cytoplasm was filled with fat vacuoles（P<0.01）. The serum levels of TG， TC， LDL-C， AST， and ALT were significantly elevated in the mice（P<0.01）. TG and TC levels were elevated in the liver（P<0.01）. The levels of IL-1β and IL-18 in liver tissue， as well as the protein expression levels of NF-κB， IκB， IKKβ， p-NF-κB， p-IκB， p-IKKβ， NLRP3， and Caspase-1 in the liver were significantly elevated（P<0.01）. Compared with the model group， the aortic arch plaques of mice in each YQTM group were attenuated， and the fat aggregation in the liver was reduced. The inflammatory cell infiltration was alleviated（P<0.05，P<0.01）. The serum levels of TG， TC， LDL-C， AST， and ALT were significantly reduced（P<0.05，P<0.01）. TG and TC levels in the liver were reduced. The IL-1β and IL-18 levels in liver tissue， as well as protein expression levels of NF-κB， IκB， IKKβ， p-NF-κB， p-IκB， p-IKKβ， NLRP3， and Caspase-1 in the liver were significantly reduced（P<0.05，P<0.01）. ConclusionThe intervention mechanism of YQTM on liver inflammation in ApoE^-∕- mice may be related to the down-regulation of the NF-κB/NLRP3 signaling pathway.

ObjectiveTo explore the application effect of using the comprehensive index method for occupational health risk assessment in the lead-acid battery enterprises. Methods Convenient sampling method was used to select two lead-acid battery enterprises A and B in Jiangsu Province, with eight key positions including ball grinding, plate casting, pasting, plate coating, plate grinding, plate slicing and brushing, welding and acid charging as the research subjects. Worksite survey of occupational health was conducted in these two lead enterprises, and the levels of lead smoke, lead dust and sulfuric acid in the key positions were detected. The health risk of occupational hazards in the eight key positions was evaluated by a comprehensive index method. Results The time-weighted average concentration (C_TWA) of lead smoke in plate casting and welding positions of enterprise A, the C_TWA of lead dust in plate grinding and plate slicing and brushing positions of enterprise A, the C_TWA of lead dust in plate grinding position of enterprise B, the C_TWA of lead smoke in welding position of enterprise B were exceeded national occupational exposure limits. The risk assessment results of the plate casting, welding, plate grinding and plate slicing and brushing positions were moderate risk, while other positions were low risk in enterprise A. The risk assessment results of the plate grinding and welding positions were moderate risk, while other positions were low risk in enterprise B. Conclusion The results of risk assessment by the comprehensive index method were consistent with the results of occupational hazard factors detection. The comprehensive index method could well evaluate the occupational health risks of lead-acid battery enterprises.