Objective To explore the polymorphism of tyrosinase (TYR) and melanocortin 1 receptor (MC1R) genes and their mRNA expression levels in relation to coat-color phenotypes in guinea pigs, providing genetic markers for locating dominant traits in guinea pigs. Methods A total of 57 self-bred ordinary-level guinea pigs were selected and divided into three groups based on coat color: white (n=22), variegated (n=22) and black (n=13). The guinea pigs were euthanized with an overdose of pentobarbital sodium via intraperitoneal injection. DNA was then extracted from the dorsal skin tissue. Polymorphism in the coding sequence (CDS) of the exons of the TYR and MC1R genes in each group was detected by cloning and sequencing. The mRNA expression of the two genes in skin tissues was detected by real-time fluorescent quantitative PCR to investigate the relationship between these genes and guinea pig coat color. Results A single nucleotide polymorphism (SNP) site was found in the CDS region of TYR exon Ⅰ, where the base A was replaced by G. All white guinea pigs had the G/G genotype for TYR, while no deep-colored (variegated and black) guinea pigs exhibited the G/G genotype for TYR. Most deep-colored guinea pigs had the A/A genotype, and a few had A/G genotype. The A/A genotype frequency in black guinea pigs was higher than in variegated guinea pigs. A 2 760 bp sequence deletion was identified in the exon of the MC1R gene, marked as the - gene, with non-deleted samples marked as N gene. Most white guinea pigs had the -/- genotype for MC1R, variegated guinea pigs mainly had the -/N genotype, and black guinea pigs mainly had the N/N genotype, with a few showing the -/N. The TYR gene expression level was higher in white guinea pigs, lower in variegated guinea pigs, and intermediate in black guinea pigs, but there was no significant difference among the three groups (P>0.05). The MC1R gene expression level in white guinea pigs was extremely low, while both variegated and black guinea pigs showed significantly higher levels than white guinea pigs (P<0.01). Black guinea pigs showed significantly higher levels than variegated guinea pigs (P<0.05). ConclusionThe TYR and MC1R genes synergistically regulate coat color of guinea pigs. The G-site mutation in the TYR gene may lead to albinism, and the change of N-site in the MC1R gene affects the depth of the coat color.

Objective: We aimed to explore the mechanism of Pizhan Powder in regulating the Wnt4/β-catenin signaling pathway to promote wound healing in mice with chronic skin ulcer. Methods: Male BALB/c mice were divided into blank, model, Pizhan Powder, Pizhan powder removed bark medications, bark medications, inhibitor, and Pizhan Powder + inhibitor groups using the random number table method, with six mice per group. Except for the blank group, chronic skin ulcer wound models were prepared in the other groups by implanting foreign bodies. The blank control group received no treatment, whereas the wounds of the model group were cleaned with furacilin solution. The Pizhan Powder, Pizhan Powder removed bark medications, and bark medications groups were each administered 0.1 g of the corresponding medication on the skin wounds. The inhibitor group received an intraperitoneal injection of 3-(4-methylphenylsulfonamido) benzoic acid methyl ester (MSAB) at a dosage of 10 mg/kg. The Pizhan Powder + inhibitor group was administered 0.1 g of Pizhan Powder on the skin wound, and an intraperitoneal injection of MSAB was also administered (10 mg/kg). These treatments were administered once a day for 14 consecutive days. Wound healing was observed on the first, third, seventh, and 14th day of treatment; hematoxylin and eosin staining was used to observe the pathological changes of ulcerated skin; keratin 10 (CK10), keratin 14 (CK14), cell proliferation nuclear antigen (Ki-67), α-smooth muscle actin (α-SMA), and β-catenin expression in wounds was observed through immunofluorescence; Western blotting was used to detect the expression of signaling pathway-related proteins (Wnt4 and β-catenin). Results: Compared to the model group, the Pizhan Powder group showed a reduced wound area and an increased wound healing rate (P<0.05) and elevated CK10, CK14, Ki-67, α-SMA, β-catenin, and Wnt4 protein expressions (P<0.05). Compared to the Pizhan Powder group, the wound healing rate of the bark medications and Pizhan Powder removed bark medications groups was reduced (P<0.05). The wound healing rate and the fluorescence expression of CK10, CK14, Ki-67, and α-SMA in the Pizhan Powder removed bark medications group were lower than that in the bark medications group (P<0.05). Compared to the Pizhan Powder group, the wound healing rate of the Pizhan Powder + inhibitor group was reduced, and CK10, CK14, Ki-67, α-SMA, β-catenin and Wnt4 protein expression were lower (P<0.05). Conclusion Pizhan Powder promotes wound healing in chronic skin ulcers of mice by regulating the Wnt4/β-catenin signaling pathway. The bark medications (buffalo hide, white mulberry root-bark, and Chinese wolfberry root-bark) play a crucial role, representing a concrete application of the traditional Chinese medicine theory of " treating skin with skin.

[Objective] To study the relationship between the expression intensity of HLA-Ⅰ platelet antibodies in patients with platelet transfusion refractoriness (PTR) and platelet cross-matching, and to further evaluate other factors in order to provide relevant data support for improving platelet transfusion efficiency and optimizing platelet transfusion regimens. [Methods] Luminex single antigen flow cytometry was used to detect platelet specific antibodies in 35 patients with hematological disease. Subsequently, the Capture-P method was employed to perform 102 crossmatchings between plasma with HLA-Ⅰ antibodies and platelets with known HLA-Ⅰ genotypes. The cross-matching results were assessed and the clinical transfusion outcomes were tracked. [Results] The positive detection rate of HLA-Ⅰ and HPA antibodies in this study was 48.6% (17/35). The negative rate of cross-matching in 102 cases was 37.3% (38/102). Multiple factors affect platelet cross-matching, such as HLA-Ⅰ antibody expression level and antibody type, antigen expression level, cross-reactivity group and eplets. Among them, the expression level and antibody type of HLA-Ⅰ antibody are the main influencing factors. However, the effectiveness of clinical platelet transfusion is not completely determined by the compatibility of platelet cross-matching. [Conclusion] In addition to avoiding strong positive HLA-Ⅰ antibodies, clinical matching should also be vigilant against the serological cross-incompatibility caused by weak positive HLA-Ⅰ antibodies. It may be necessary to establish HLA-Ⅰ low expression antigen database as a better alternative platelet donor selection strategy, and gradually explore the effectiveness of ‘low expression mismatch’ strategy for clinical platelet transfusion.

Objective To analyze the application effects of artificial intelligence (AI) software and Mimics software in preoperative three-dimensional (3D) reconstruction for thoracoscopic anatomical pulmonary segmentectomy. Methods A retrospective analysis was conducted on patients who underwent thoracoscopic pulmonary segmentectomy at the Second People's Hospital of Huai'an from October 2019 to March 2024. Patients who underwent AI 3D reconstruction were included in the AI group, those who underwent Mimics 3D reconstruction were included in the Mimics group, and those who did not undergo 3D reconstruction were included in the control group. Perioperative related indicators of each group were compared. Results A total of 168 patients were included, including 73 males and 95 females, aged 25-81 (61.61±10.55) years. There were 79 patients in the AI group, 53 patients in the Mimics group, and 36 patients in the control group. There were no statistical differences in gender, age, smoking history, nodule size, number of lymph node dissection groups, postoperative pathological results, or postoperative complications among the three groups (P>0.05). There were statistical differences in operation time (P<0.001), extubation time (P<0.001), drainage volume (P<0.001), bleeding volume (P<0.001), and postoperative hospital stay (P=0.001) among the three groups. There were no statistical differences in operation time, extubation time, bleeding volume, or postoperative hospital stay between the AI group and the Mimics group (P>0.05). There was no statistical difference in drainage volume between the AI group and the control group (P=0.494), while there were statistical differences in operation time, drainage tube retention time, bleeding volume, and postoperative hospital stay (P<0.05). Conclusion For patients requiring thoracoscopic anatomical pulmonary segmentectomy, preoperative 3D reconstruction and preoperative planning based on 3D images can shorten the operation time, postoperative extubation time and hospital stay, and reduce intraoperative bleeding and postoperative drainage volume compared with reading CT images only. The use of AI software for 3D reconstruction is not inferior to Mimics manual 3D reconstruction in terms of surgical guidance and postoperative recovery, which can reduce the workload of clinicians and is worth promoting.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.