OBJECTIVES: This study aimed to compare the effectiveness of ultrasound and acoustic and laser cleaning of curved root canals. METHODS: A total of 92 molars with independent root canals with a curvature of 20°-40° were prepared and standardized at 04 25# and stained with gentian violet solution for 72 h. Among them, 52 were randomly divi-ded into four groups for final rinsing (n=13): NI group, PUI group, EDDY group, and PIPS group. Ten samples in each group were cut horizontally along the long axis perpendicular to the root and divided into curved upper, curved, and apical segments. Images were taken with a stereomicroscope and Image J measurements were taken to calculate the depth of rinse penetration. The remaining three samples from each group were split along the long axis of the dentin, photographed by scanning electron microscope to record the dentin tubule exposure and staining layer, and scored for staining layer by double-blind method. SPSS 26.0 software was used to perform statistical analysis and select the best flushing method. An extra 40 samples were randomly divided into four groups for detection of flushing fluid penetration depth (n=10): 10, 20, 30, and 40 s. RESULTS: In the upper part, the mean depth of infiltration was not significantly different between the experimental and control groups (P>0.05). The PIPS group had a significantly lower smear layer score than the control group and the EDDY group (P<0.01). In the curved segment, the mean depth of infiltration was significantly greater in the PUI group than in the control group (P<0.05); the tarnish layer score was lower in each experimental group than in the control group. At the top, the mean depth of infiltration was greater in the PUI and PIPS groups than in the control group (P<0.05), and the smear layer score was lower in the PIPS group than in the other groups (P<0.05). After the time was changed, the depth of infiltration of PUI increased only in the apical segment as the flushing time increased. CONCLUSIONS The PUI and PIPS methods facilitate the penetration of irrigation solution into the dentin canal in curved root canals, especially in the apical segment. The PIPS technique is effective in removing the smear layer in curved root canals.
Humans ; Dental Pulp Cavity ; Microscopy, Electron, Scanning ; Root Canal Irrigants ; Root Canal Preparation/methods* ; Smear Layer ; Sodium Hypochlorite ; Therapeutic Irrigation/methods* ; Double-Blind Method

OBJECTIVES: The emergence of resistant bacteria is being increasingly reported around the world, potentially threatening millions of lives. Amongst resistant bacteria, methicillin-resistant Staphylococcus aureus (MRSA) is the most challenging to treat. This is due to emergent MRSA strains and less effective traditional antibiotic therapies to Staphylococcal infections. The use of bacteriophages (phages) against MRSA is a new, potential alternate therapy. In this study, morphology, genetic and protein structure of lytic phages against MRSA have been analysed. METHODS: Isolation of livestock and sewage bacteriophages were performed using 0.4 μm membrane filters. Plaque assays were used to determine phage quantification by double layer agar method. Pure plaques were then amplified for further characterization. Sulfate-polyacrylamide gel electrophoresis and random amplification of polymorphic DNA were run for protein evaluation, and genotyping respectively. Transmission electron microscope was also used to detect the structure and taxonomic classification of phage visually. RESULTS: Head and tail morphology of bacteriophages against MRSA were identified by transmission electron microscopy and assigned to the Siphoviridae family and the Caudovirales order. CONCLUSION: Bacteriophages are the most abundant microorganism on Earth and coexist with the bacterial population. They can destroy bacterial cells successfully and effectively. They cannot enter mammalian cells which saves the eukaryotic cells from lytic phage activity. In conclusion, phage therapy may have many potential applications in microbiology and human medicine with no side effect on eukaryotic cells.
Agar ; Bacteria ; Bacteriophages ; Caudovirales ; Classification ; DNA ; Electrophoresis ; Eukaryotic Cells ; Head ; Humans ; Livestock ; Membranes ; Methicillin Resistance ; Methicillin-Resistant Staphylococcus aureus ; Methods ; Microscopy, Electron, Scanning Transmission ; Microscopy, Electron, Transmission ; Sewage ; Siphoviridae ; Staphylococcal Infections ; Tail

BACKGROUND: The objectives of this study were to design polycaprolactone nanofibers with a radial pattern using a modified electrospinning method and to evaluate the effect of radial nanofiber deposition on mechanical and biological properties compared to non-patterned samples. METHODS: Radially patterned polycaprolactone nanofibers were prepared with a modified electrospinning method and compared with randomly deposited nanofibers. The surface morphology of samples was observed under scanning electron microscopy (SEM). The tensile properties of nanofibrous mats were measured using a tabletop uniaxial testing machine. Fluorescence-stained human bone marrow stem cells were placed along the perimeter of the radially patterned and randomly deposited. Their migration toward the center was observed on days 1, 4, and 7, and quantitatively measured using ImageJ software. RESULTS: Overall, there were no statistically significant differences in mechanical properties between the two types of polycaprolactone nanofibrous mats. SEM images of the obtained samples suggested that the directionality of the nanofibers was toward the central area, regardless of where the nanofibers were located throughout the entire sample. Florescence images showed stronger fluorescence inside the circle in radially aligned nanofibers, with significant differences on days 4 and 7, indicating that migration was quicker along radially aligned nanofibers than along randomly deposited nanofibers. CONCLUSIONS: In this study, we successfully used modified electrospinning to fabricate radially aligned nanofibers with similar mechanical properties to those of conventional randomly aligned nanofibers. In addition, we observed faster migration along radially aligned nanofibers than along randomly deposited nanofibers. Collectively, the radially aligned nanofibers may have the potential for tissue regeneration in combination with stem cells.
Bandages ; Bone Marrow ; Fluorescence ; Humans ; Methods ; Microscopy, Electron, Scanning ; Nanofibers ; Polymers ; Regeneration ; Stem Cells ; Wound Healing ; Wounds and Injuries

BACKGROUND: Several patients experience persistent otorrhea after a flawless surgical procedure because of insufficient epithelial healing. Several efforts, such as autologous tissue allograft and xenograft, have been made to halt otorrhea. However, a stable technology to induce temporal epithelial repair is yet to be established. Therefore, this study aims to investigate whether implantation of seeding adipose-derived mesenchymal stem cell (ADMSC) aggregates on extracellular matrix (ECM; herein, ADMSC aggregate-ECM) into damaged skin wound promotes skin regeneration. METHODS: ADMSC aggregate-ECM was prepared using a previously described procedure that isolated ADMSCs from rabbits and applied to the auricle and auditory meatus wound beds of New Zealand white rabbits. Wound healing was assessed by general observation and hematoxylin and eosin (H&E) staining. Secretion of growth factor of the tissue was evaluated by western blotting. Two other groups, namely, ECM and control, were used. Comparisons of three groups were conducted by one-way analysis of variance analysis. RESULTS: ADMSCs adhered tightly to the ECM and quickly formed cell sheets. At 2 weeks, general observation and H&E staining indicated that the wound healing rates in the ADMSC aggregate-ECM (69.02 ± 6.36%) and ECM (59.32 ± 4.10%) groups were higher than that in the control group (43.74 ± 12.15%; P = 0.005, P < 0.001, respectively) in ear auricle excisional wounds. At 7 weeks, The scar elevation index was evidently reduced in the ADMSC aggregate-ECM (2.08 ± 0.87) and ECM (2.31 ± 0.33) groups compared with the control group (4.06 ± 0.45; P < 0.001, P < 0.001, respectively). In addition, the scar elevation index of the ADMSC aggregate-ECM group reached the lowest rate 4 weeks in advance. In auditory meatus excisional wounds, the ADMSC aggregate-ECM group had the largest range of normal skin-like structure at 4 weeks. The ADMSC aggregate-ECM and ECM groups secreted increased amounts of growth factors that contributed to skin regeneration at weeks 1 and 2, respectively. CONCLUSIONS ADMSC aggregate-ECM and ECM are effective repair materials for wound healing, especially ADMSC aggregate-ECM. This approach will provide a meaningful experimental basis for mastoid epithelium repair in subsequent clinical trials.
Adipose Tissue ; cytology ; Animals ; Cell Differentiation ; physiology ; Cell Proliferation ; physiology ; Cells, Cultured ; Ear Auricle ; cytology ; Extracellular Matrix ; chemistry ; Flow Cytometry ; Mesenchymal Stem Cell Transplantation ; methods ; Mesenchymal Stem Cells ; cytology ; Microscopy, Electron, Scanning ; Osteogenesis ; physiology ; Rabbits ; Real-Time Polymerase Chain Reaction

In the present study, we aimed to determine the cause of surface film formation in three rice vinegars fermented using the traditional static fermentation method. The pH and total acidity of vinegar were 3.0–3.3 and 3.0–8.7%, respectively, and acetic acid was the predominant organic acid present. Colonies showing a clear halo on GYC medium were isolated from the surface film of all vinegars. Via 16S rDNA sequencing, all of the isolates were identified as Acetobacter pasteurianus. Furthermore, field-emission scanning electron microscopy analysis showed that the bacterial cells had a rough surface, were rod-shaped, and were ∼1 × 2 µm in size. Interestingly, cells of the isolate from one of the vinegars were surrounded with an extremely fine threadlike structure. Thus, our results suggest that formation of the surface film in rice vinegar was attributable not to external contamination, to the production of bacterial cellulose by A. pasteurianus to withstand the high concentrations of acetic acid generated during fermentation. However, because of the formation of a surface film in vinegar is undesirable from an industrial perspective, further studies should focus on devising a modified fermentation process to prevent surface film formation and consequent quality degradation.
Acetic Acid ; Acetobacter ; Cellulose ; DNA, Ribosomal ; Fermentation ; Hydrogen-Ion Concentration ; Methods ; Microscopy, Electron, Scanning

BACKGROUND: Lonocyte-derived multipotential cells (MOMCs) include progenitors capable of differentiation into multiple cell lineages and thus represent an ideal autologous transplantable cell source for regenerative medicine. In this study, we cultured MOMCs, generated from mononuclear cells of peripheral blood, on the surface of nanocomposite thin films. METHODS: For this purpose, nanocomposite Poly(e-caprolactone) (PCL)-based thin films containing either 2.5 wt% silica nanotubes (SiO2ntbs) or strontium hydroxyapatite nanorods (SrHAnrds), were prepared using the spin-coating method. The induced differentiation capacity of MOMCs, towards bone and endothelium, was estimated using flow cytometry, real-time polymerase chain reaction, scanning electron microscopy and fluorescence microscopy after cells' genetic modification using the Sleeping Beauty Transposon System aiming their observation onto the scaffolds. Moreover, Wharton's Jelly Mesenchymal Stromal Cells were cultivated as a control cell line, while Human Umbilical Vein Endothelial Cells were used to strengthen and accelerate the differentiation procedure in semi-permeable culture systems. Finally, the cytotoxicity of the studied materials was checked with MTT assay. RESULTS: The highest differentiation capacity of MOMCs was observed on PCL/SiO2ntbs 2.5 wt% nanocomposite film, as they progressively lost their native markers and gained endothelial lineage, in both protein and transcriptional level. In addition, the presence of SrHAnrds in the PCL matrix triggered processes related to osteoblast bone formation. CONCLUSION: To conclude, the differentiation of MOMCs was selectively guided by incorporating SiO2ntbs or SrHAnrds into a polymeric matrix, for the first time.
Autografts ; Beauty ; Cell Line ; Cell Lineage ; Durapatite ; Endothelium ; Flow Cytometry ; Human Umbilical Vein Endothelial Cells ; Mesenchymal Stromal Cells ; Methods ; Microscopy, Electron, Scanning ; Microscopy, Fluorescence ; Nanocomposites ; Nanotubes ; Osteoblasts ; Osteogenesis ; Polymers ; Real-Time Polymerase Chain Reaction ; Regenerative Medicine ; Silicon Dioxide ; Strontium ; Wharton Jelly

PURPOSE: The reaction of cells to a titanium implant depends on the surface characteristics of the implant which are affected by decontamination. The aim of this study was to evaluate the cytocompatibility of titanium disks treated with various decontamination methods, using salivary bacterial contamination with dental pellicle formation as an in vitro model. METHODS: Sand-blasted and acid-etched (SA) titanium disks were used. Three control groups (pristine SA disks [SA group]; salivary pellicle-coated SA disks [pellicle group]; and biofilm-coated, untreated SA disks [NT group]) were not subjected to any decontamination treatments. Decontamination of the biofilm-coated disks was performed by 14 methods, including ultrasonic instruments, rotating instruments, an air-powder abrasive system, a laser, and chemical agents. MG63 cells were cultured in the presence of the treated disks. Cell proliferation assays were performed on days 2 and 5 of cell culture, and cell morphology was analyzed by immunofluorescence and scanning electron microscopy (SEM). A vascular endothelial growth factor (VEGF) assay was performed on day 5 of culture. RESULTS: The cell proliferation assay revealed that all decontaminated disks, except for the 2 groups treated using a plastic tip, showed significantly less cell proliferation than the SA group. The immunofluorescence and SEM analyses revealed that most groups showed comparable cell density, with the exception of the NT group, in which the cell density was lower and bacterial residue was observed. Furthermore, the cells grown with tetracycline-treated titanium disks showed significantly lower VEGF production than those in the SA group. CONCLUSIONS: None of the decontamination methods resulted in cytocompatibility similar to that of pristine SA titanium. However, many methods caused improvement in the biocompatibility of the titanium disks in comparison with the biofilm-coated, untreated titanium disks. This suggests that decontamination is indispensable for the treatment of peri-implantitis, even if the original biocompatibility cannot be restored.
Biocompatible Materials ; Cell Count ; Cell Culture Techniques ; Cell Proliferation ; Decontamination ; Dental Implants ; Dental Pellicle ; Fluorescent Antibody Technique ; In Vitro Techniques ; Methods ; Microscopy, Electron, Scanning ; Peri-Implantitis ; Plastics ; Titanium ; Ultrasonics ; Vascular Endothelial Growth Factor A

PURPOSE: Direct application of atmospheric-pressure plasma jets (APPJs) has been established as an effective method of microbial decontamination. This study aimed to investigate the bactericidal effect of direct application of an APPJ using helium gas (He-APPJ) on Porphyromonas gingivalis biofilms on sandblasted and acid-etched (SLA) titanium discs. METHODS: On the SLA discs covered by P. gingivalis biofilms, an APPJ with helium (He) as a discharge gas was applied at 3 different time intervals (0, 3, and 5 minutes). To evaluate the effect of the plasma itself, the He gas–only group was used as the control group. The bactericidal effect of the He-APPJ was determined by the number of colony-forming units. Bacterial viability was observed by confocal laser scanning microscopy (CLSM), and bacterial morphology was examined by scanning electron microscopy (SEM). RESULTS: As the plasma treatment time increased, the amount of P. gingivalis decreased, and the difference was statistically significant. In the SEM images, compared to the control group, the bacterial biofilm structure on SLA discs treated by the He-APPJ for more than 3 minutes was destroyed. In addition, the CLSM images showed consistent results. Even in sites distant from the area of direct He-APPJ exposure, decontamination effects were observed in both SEM and CLSM images. CONCLUSIONS: He-APPJ application was effective in removing P. gingivalis biofilm on SLA titanium discs in an in vitro experiment.
Bacterial Load ; Biofilms ; Decontamination ; Helium ; In Vitro Techniques ; Methods ; Microbial Viability ; Microscopy, Confocal ; Microscopy, Electron, Scanning ; Plasma Gases ; Plasma ; Porphyromonas gingivalis ; Porphyromonas ; Stem Cells ; Titanium

Confocal laser scanning microscopy (CLSM) was used to examine archaeoparasitological specimens from coprolites associated with La Cueva de los Muertos Chiquitos (CMC) located near present-day Durango, Mexico. The eggs for 4 different types of parasites recovered from CMC coprolites were imaged using CLSM to assist with identification efforts. While some of the parasite eggs recovered from CMC coprolites were readily identified using standard light microscopy (LM), CLSM provided useful data for more challenging identifications by highlighting subtle morphological features and enhancing visualization of parasite egg anatomy. While other advanced microscopy techniques, such as scanning electron microscopy (SEM), may also detect cryptic identifying characters, CLSM is less destructive to the specimens. Utilizing CLSM allows for subsequent examinations, such as molecular analyses, that cannot be performed following SEM sample preparation and imaging. Furthermore, CLSM detects intrinsic autofluorescence molecules, making improved identification independent of resource and time-intensive protocols. These aspects of CLSM make it an excellent method for assisting in taxonomic identification and for acquiring more detailed images of archaeoparasitological specimens.
Eggs ; Methods ; Mexico ; Microscopy ; Microscopy, Confocal ; Microscopy, Electron, Scanning ; Ovum ; Parasites

β-Carotene is one of the most abundant natural pigments in foods; however, usage of β-carotene is limited because of its instability. Microencapsulation techniques are usually applied to protect microencapsulated β-carotene from oxidization. In this study, β-carotene was microencapsulated using different drying processes: spray-drying, spray freeze-drying, coating, and spray granulation. The properties of morphology, particle size, water content, thermal characteristic, and chemical stability have been explored and compared. Scanning electron microscopy measurements showed that the coated powder had a dense surface surrounded by starch and suggested that the coating process gave a microencapsulated powder with the smallest bulk density and the best compressibility among the prepared powders. The chemical stabilities of microcapsules were evaluated during six months of storage at different temperatures. The coated powder had the highest mass fraction of β-carotene, which indicated that the coating process was superior to the three other drying processes.
Drug Compounding/methods* ; Drug Stability ; Freeze Drying ; Microscopy, Electron, Scanning ; Technology, Pharmaceutical ; beta Carotene/chemistry*