ObjectiveTo explore the mechanism by which the ethanol extract of Epimedium brevicornu （EEBM） intervenes in mesenchymal adipose-derived stem cells （ADSCs） to delay aging in castrated rats. MethodsForty-five 3-month-old SPF female SD rats were ovariectomized and randomly divided into model group， ADSCs treatment group， and ADSCs groups treated with low， medium， and high concentrations of EEBM （1， 50， 100 μg·L^-1）， referred to as the AE low， medium， and high concentration groups， with 9 rats in each group. After tail vein injection of 200 μL of the corresponding stem cell suspension， aging-related indicators including cyclin-dependent kinase inhibitor （p21）， tumor suppressor gene （p53）， interleukin-6 （IL-6）， interleukin-8 （IL-8）， superoxide dismutase （SOD）， malondialdehyde （MDA）， B-cell lymphoma-2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cysteine-aspartic acid protease-3 （Caspase-3）， and lipofuscin were measured using enzyme-linked immunosorbent assay （ELISA） and Western blot. ResultsCompared with the model group， the IL-6 content in the AE low， medium， and high concentration groups was significantly decreased （P<0.05）. Lipofuscin， MDA， and IL-8 levels in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.01）， while SOD content was significantly increased （P<0.05， P<0.01）. Compared with the ADSCs treatment group， lipofuscin and IL-8 levels in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）. The MDA content was significantly decreased in the AE medium concentration group （P<0.01）. Compared with the model group， protein levels of p21， p53， Bax， and Caspase-3 in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， while the Bcl-2 protein level was significantly increased （P<0.01）. Compared with the ADSCs treatment group， protein levels of p21， p53， Bax， and Caspase-3 in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， and the Bcl-2 protein level in the AE low concentration group was significantly increased （P<0.01）. ConclusionThe results of this experiment show that EEBM-treated ADSCs or ADSCs may delay aging in castrated rats by inhibiting cell apoptosis， reducing cell cycle inhibitors and pro-inflammatory factors， enhancing antioxidant capacity， and reducing oxidative reactions. Moreover， EEBM-treated ADSCs demonstrate stronger anti-aging effects than ADSCs alone. This study provides experimental evidence supporting the clinical use of EEBM to intervene in ADSCs and delay aging.

Atopic dermatitis （AD） is a common pruritic and chronic inflammatory dermatosis in clinical practice and is one of the diseases responding specifically to traditional Chinese medicine （TCM）. With the launch of biological agents and small molecule drugs and the development and implementation of guidelines of diagnosis and treatment， clinical pathways of treatment of moderate to severe AD， and consensus on the whole-process management of AD， the clinical efficacy of moderate to severe AD has been significantly improved. However， there are still many unmet clinical needs that require more effective methods to meet. In response to the Opinions of the CPC Central Committee and the State Council on Facilitating the Inheritance， Innovation， and Development of Traditional Chinese Medicine and the spirit of the National Conference on TCM， the China Association of Chinese Medicine organized more than 20 experts in TCM dermatology， Western medicine dermatology， interdisciplinary fields， and industries to discuss the difficulties and advantages of TCM in the treatment of AD. TCM treatment for AD can not only improve rash and relieve itching but also solve many concomitant syndromes. The abundant external treatment methods of TCM have advantages for different special populations and rash characteristics. The concept of treating disease before its onset in TCM is in line with the chronic disease management mode of prevention and treatment of atopic march and prevention of recurrence. In addition， TCM therapy can reduce the use of topical glucocorticoids and has good safety. Regarding the comorbidity of AD， equal emphasis on TCM and Western medicine and multidisciplinary joint treatment should be advocated to achieve maximum benefit for patients. The exchange of TCM and Western medicine has clarified the positioning and advantages of TCM intervention in AD， providing guidance for clinical and scientific research.

A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Two methods including gas chromatography tandem mass spectrometry (GC-MS/MS) and high-performance liquid chromatography tandem mass spectrometry (LC-MS/MS) were established to detect common alkyl sulfonates and aryl sulfonates genotoxic impurities. Four alkyl sulfonates and methyl benzenesulfonate were determined by GC-MS/MS using butyl methanesulfonate as the internal standard, the chromatographic column was HP-5MS UI (30 mm × 0.25 mm, 0.25 µm), the carrier gas was helium, the flow rate was 1.0 mL·min^-1 in a constant flow mode, the sample inlet temperature was set to 250 ℃, the split ratio was 10∶1, and the initial temperature of the heating program was 80 ℃, maintained for 1 minute, and then increased to 240 ℃ at a heating rate of 30 ℃·min^-1 for 2 minutes. The mass spectrometry detector was an electron bombardment ion source (EI source), the data collection condition was multi reaction monitoring mode (MRM), and method validation using the raw material of clinical drug citalopram hydrobromide as a sample. The results showed that the linear range of four alkyl sulfonates and methyl benzenesulfonate were good at 3-50 ng·mL^-1 and 9-150 ng·mL^-1, with a correlation coefficient of r > 0.999, The spiked recovery was 80%-120%. The detection limits were 1 and 3 ng·mL^-1; Ten aryl sulfonates determined by LC-MS/MS, the chromatographic column was CSH Fluoro phenyl (100 mm × 2.1 mm, 1.7 µm), the mobile phase was methanol (B)-5 mmol·L^-1 ammonium formate (D), with a flow rate of 0.2 mL·min^-1, and gradient elution was performed. The gradient program (T/% B) was set as 0/20, 25/90, 35/90, 42/20. The mass spectrometer detector was electro spray ionization with positive ionization mode (ESI⁺), the data collection was in dynamic multi reaction monitoring mode (dMRM), and the method was validated using the raw material of the clinical drug citalopram hydrobromide as a sample. The results showed that the linear range of aryl sulfonates were good at 9-2 000 ng·mL^-1, 3-100 ng·mL^-1 and 0.9-30 ng·mL^-1, respectively. The correlation coefficient r > 0.999, the spiked recovery was 80%-120%. The detection limits were 30, 1 and 0.3 ng·mL^-1. Two detection methods did not detect potential sulfonate genotoxicity impurities in the above APIs. The established analytical methods are reliable and effective, which can provide reference for drug quality control and detection.

BACKGROUND:Seed cells are seeded on three-dimensional scaffold materials,and three-dimensional culture in bioreactors is a common in vitro tissue engineering culture method,but the changes in cell proliferation and metabolic patterns in bioengineered blood vessel construction are still unclear. OBJECTIVE:To explore the metabolic changes of cells such as oxygen consumption and their causes during the whole process of biological vascular tissue construction by in vitro bioreactor. METHODS:The self-built vascular bioreactor system was used as the platform;bovine vascular smooth muscle cells were used as the seed cells,and a conventional CO2 incubator provided the external gas environment for the cultivation process.Seed cells were seeded on a tubular porous polyglycolic acid scaffold material for three-dimensional culture,and the whole process included a one-week resting period and a seven-week pulsating tensile stress stimulation loading period.A non-invasive monitoring system was built,and the optical dissolved oxygen patch method was used to monitor the changes of dissolved oxygen in the culture solution in the reactor,and the glucose consumption and lactic acid production were measured by regular sampling.CCK-8 assay was used to determine the proliferation of smooth muscle cells on polyglycolic acid three-dimensional scaffold materials.Nicotinamide adenine dinucleotide oxidation state and reduction state ratio(NAD+/NADH)was utilized to understand cell proliferation and metabolism in the early stage of culture.RT-qPCR and western blot assay were applied to detect the expression of proliferation-related genes(Ki67)and glycolysis-related genes(GLUT-1,LDHA). RESULTS AND CONCLUSION:(1)The dissolved oxygen level in the culture solution was(4.314±0.380)mg/L from the cell injection to the end of the resting period(the first week),and gradually stabilized at(1.960±0.866)mg/L after the tensile stress stimulation(the last seven weeks);the two had significant changes(P<0.05).(2)The ratio of glucose consumption to lactic acid production in the cell culture medium YL/G increased rapidly after the cells were injected,and the highest value was above 1 on the fifth day,and then slow down to 0.5(The mean value of YL/G in the resting period was 0.89 and the mean value in the pressurized period was 0.57,P<0.05).(3)CCK-8 assay results showed that A450 value gradually increased after the cells were injected,and reached the highest value on the fifth day,reaching 3.17,and then slowly decreased.At the same time,it was found that Ki67 mRNA was up-regulated on the third day of culture,and then declined.The expression level of Ki67 protein was higher from the third day to the fifth day.(4)The detection of NAD+/NADH showed that the increase was obvious from the fifth to the seventh day after the injection of cells,and the expression of glycolysis-related genes(GLUT-1 and LDHA)was up-regulated and changed synchronously,and the relative expression was higher in the first five days.(5)The results showed that the tissue-engineered blood vessels were constructed using the vascular bioreactor and the smooth muscle cells in the early stage mainly proliferated and exhibited a metabolic feature of low oxygen consumption.The metabolic characteristics of high oxygen consumption were observed during the pulsatile tensile stress stimulation stage.

BACKGROUND:Minipigs are often used in research fields such as skin injury,vascular trauma and cosmetic medicine because they are highly similar to human beings in terms of skin tissue structure and cardiovascular system.Hydrogel as a wound repair drug possesses a variety of excellent physicochemical properties such as strong water retention and adhesion,which can provide isolation moisturization and drug release for wounds. OBJECTIVE:To summarize and conclude the progress of the application of trauma models for different experimental purposes of hydrogel therapy for minipigs,to reveal the development status of various types of minipig trauma models,to analyze the deficiencies of minipig trauma models at the present stage. METHODS:The relevant articles published in Web of Science database and CNKI database from the establishment of each database to 2023 were checked,using"piglet,miniature pig,minipig,miniature pig;gel,hydrogel;trauma,injury,wound,lesion,incision"as Chinese search terms and"Miniature Swine,Miniature pig,minipig;gel,hydrogel;injury,wound,lesion,incision"as English search terms.A total of 438 Chinese and English documents were retrieved,and 59 documents were included in the study through the inclusion and exclusion criteria. RESULTS AND CONCLUSION:(1)At present,the main models used clinically for trauma repair are large animal species(dogs and pigs),rabbits,and rodents(rats and mice).Because the skin structure of the minipig is more like that of humans,the minipig is the most ideal animal model for trauma repair.(2)In the in-vitro skin injury model,skin defect model is the basic wound model,which can be divided into full skin defect model and medium-thickness skin defect model according to the depth of the wound defect.Burn wound model and infected wound model are multidimensional models with hot metal scald and bacterial culture imposed on the basis of the skin defect model,which have the advantages of high safety coefficient and low operation difficulty.(3)In the in-vivo trauma repair model,mini-pigs are used as esophageal cricothyrotomy model which is more in line with the pathological state of clinical diseases.Mini-pigs are used in the gastric perforation and vascular hemostasis model,which can visually demonstrate the stronger organ adhesion,hemostatic properties and tissue regeneration-promoting effects of the hydrogel.(4)The specific parts of the pig also has the corresponding mode of use:pig ear is usually used to evaluate the hydrogel drug delayed-release effect.Porcine cellular proteins and pig skin collagen are mostly used to prepare composite hydrogels of tissue origin.