OBJECTIVE: To investigate the effectiveness of osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in the treatment of tibial plateau fractures involving posterolateral column collapse. METHODS: A clinical data of 23 patients with tibial plateau fractures involving posterolateral column collapse, who had undergone osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation between January 2015 and June 2021, was retrospectively analyzed. There were 14 males and 9 females with an average age of 42.6 years ranging from 26 to 62 years. The causes of injury included traffic accident in 16 cases, falling from height in 5 cases, and other injuries in 2 cases. According to Schatzker classification, there were 15 cases of type Ⅴ and 8 cases of type Ⅵ. The time from injury to operation was 4-8 days with an average of 5.9 days. The operation time, intraoperative blood loss, fracture healing time, and complications were recorded. The depth of articular surface collapse of posterolateral column and posterior inclination angle (PSA) of the tibial plateau were compared before operation and at 2 days and 6 months after operation; fracture reduction of tibial plateau fracture was evaluated by Rasmussen anatomic score. The recovery of knee function was evaluated by Hospital for Special Surgery (HSS) score at 2 days and 6 months after operation. RESULTS: All 23 patients were completed the operation successfully. The operation time was 120-195 minutes, with an average of 152.8 minutes; the intraoperative blood loss was 50-175 mL, with an average of 109.5 mL. All patients were followed up 12-24 months, with an average of 16.7 months. One patient had superficial wound infection after operation, and the incision healed after dressing change; primary healing of incision of other patients was obtained. The fracture healing time was 12-18 weeks, with an average of 13.7 weeks. No failure of internal fixation, varus and valgus deformity of the knee joint, and instability of the knee joint was found at last follow-up. One patient developed joint stiffness and the range of motion of the knee joint was 10°-100°; the range of motion of the knee joint of other patients was 0°-125°. At 2 days and 6 months after operation, the depth of articular surface collapse of posterolateral column, PSA, and Rasmussen anatomic scores significantly improved when compared with those before operation ( P<0.05). There was no significant difference between the two postoperative time points ( P>0.05). The HSS score at 6 months after operation was significantly higher than that at 2 days after operation ( P<0.05). CONCLUSION For tibial plateau fractures involving posterolateral column collapse, reduction and internal fixation through osteotomy of non-core weight-bearing area of the lateral tibial plateau has the advantages of fully expose the posterolateral column fragment, good articular surface reduction, sufficient bone grafting, and fewer postoperative complications. It is beneficial to restore knee joint function and can be widely used in clinic.
Male ; Female ; Humans ; Adult ; Retrospective Studies ; Blood Loss, Surgical ; Tibial Plateau Fractures ; Treatment Outcome ; Bone Plates ; Tibial Fractures/surgery* ; Knee Joint ; Fracture Fixation, Internal ; Osteotomy ; Weight-Bearing

Objective: To preliminarily explore the mechanism of tensile stress regulating endochondral osteogenesis of condyle by analyzing the expression profiles of significantly different microRNAs (miRNAs) in exosomes of rat mandibular condylar chondrocytes (MCC) under quiescent and cyclic tensile strain (CTS) conditions. Methods: Rat condylar chondrocytes were cultured under static and CTS conditions respectively (10 SD rats, male, 2 weeks old), and exosomes were extracted. The two groups of exosomes were named as control group and CTS group respectively. The differential expression miRNAs were screened by high-throughput sequencing. Bioinformatics analysis and prediction of target genes related to osteogenesis were performed by TargetScan and miRanda website. Results: The exosomes of rat condylar chondrocytes cultured under tensile stress showed a "double concave disc" monolayer membrane structure, the expression of CD9 and CD81 were positive, and the particle size distribution accorded with the characteristics of exosomes, which was consistent with that of static cultured rat condylar chondrocytes. A total of 85 miRNAs with significantly different expression were detected by high-throughput sequencing (P<0.05). The main biological processes and molecular functions of differential miRNAs were biological processes and protein binding, respectively. Kyoto Encyclopedia of Genes and Genomes (KEGG) database pathway enrichment analysis showed that there was significant enrichment in mammalian target of rapamycin (mTOR) signal pathway. The candidate target genes of miR-199a-5p include bone morphogenetic protein 3 (BMP3), endothelin converting enzyme 1, and miR-186-5p may target Smad8 and BMP3 to exert osteogenesis-related functions. Conclusions: Compared with static state, tensile stress stimulation can change the expression of miRNAs such as miR-199a-5p, miR-186-5p in the exocrine body of rat condylar chondrocytes, which can be considered as a mean to regulate the application potential of the exosomes.
Animals ; Male ; Rats ; Bone Morphogenetic Protein 3 ; Chondrocytes/metabolism* ; Mandibular Condyle ; MicroRNAs/metabolism* ; Rats, Sprague-Dawley ; Signal Transduction ; Stress, Mechanical

A novel structural dynamics test method and device were designed to test the biomechanical effects of dynamic axial loading on knee cartilage and meniscus. Firstly, the maximum acceleration signal-to-noise ratio of the experimental device was calculated by applying axial dynamic load to the experimental device under unloaded condition with different force hammers. Then the experimental samples were divided into non-specimen group (no specimen loaded), sham specimen group (loaded with polypropylene samples) and bovine knee joint specimen group (loaded with bovine knee joint samples) for testing. The test results show that the experimental device and method can provide stable axial dynamic load, and the experimental results have good repeatability. The final results confirm that the dynamic characteristics of experimental samples can be distinguished effectively by this device. The experimental method proposed in this study provides a new way to further study the biomechanical mechanism of knee joint structural response under axial dynamic load.
Animals ; Cattle ; Biomechanical Phenomena ; Knee Joint/physiology* ; Meniscus ; Mechanical Phenomena ; Weight-Bearing

OBJECTIVE: To explore the effectiveness of hairpin shaped incision combined with cover-lifting flap in plastic surgery of huge fat pad on nape and back. METHODS: Between March 2019 and March 2023, 10 patients with huge fat pad on the nape and back were treated. There was 1 male and 9 females with an average age of 52 years (range, 39-57 years). All patients had soft tissue bulge on the nape and back. Preoperative MRI showed the subcutaneous fat thickening. The length of the longitudinal axis of the fat pad ranged from 10.0 to 25.0 cm (mean, 14.1 cm), the length of the transverse axis ranged from 6.0 to 15.0 cm (mean, 10.8 cm); the thickness of the fat pad ranged from 2.5 to 5.1 cm (mean, 3.9 cm). Under general anesthesia, the patient was placed in a prone position and a hairpin shaped incision was made. The flap was lifted to remove the fat pad according to the marked area. The dressing was changed every 2 days after operation. RESULTS: The operation time was 35-110 minutes (mean, 72 minutes). The intraoperative blood loss was 35-80 mL (mean, 49.5 mL). The drainage tube was removed at 2-5 days after operation (mean, 3.4 days). All incisions healed by first intention without incision dehiscence, infection, subcutaneous bruising, hematoma, or other related complications. All patients were followed up 2-24 months (mean, 12 months). All patients had a good shape of the nape and back and no noticeable scar on the incision. According to the Vancouver Scar Scale evaluation criteria, the incision scar score was 3-5 (mean, 3.7) at 2 months after operation. Patients had good neck movement with no recurrence. CONCLUSION For the huge fat pad on the nape and back, the plastic surgery using hairpin shaped incision and cover-lifting flap has the advantages of fully exposing the fat pad, concealed incision, simple operation, and natural shape of the nape and back after operation.
Female ; Humans ; Male ; Middle Aged ; Surgery, Plastic ; Cicatrix ; Lifting ; Plastic Surgery Procedures ; Surgical Wound ; Adipose Tissue

OBJECTIVE: To discuss the influence of artificial ankle elastic improved inserts (hereinafter referred to as "improved inserts") in reducing prosthesis micromotion and improving joint surface contact mechanics by finite element analysis. METHODS: Based on the original insert of INBONE Ⅱ implant system (model A), four kinds of improved inserts were constructed by adding arc or platform type flexible layer with thickness of 1.3 or 2.6 mm, respectively. They were Flying goose type_1.3 elastic improved insert (model B), Flying goose type_2.6 elastic improved insert (model C), Platform type_1.3 elastic improved insert (model D), Platform type_2.6 elastic improved insert (model E). Then, the CT data of right ankle at neutral position of a healthy adult male volunteer was collected, and finite element models of total ankle replacement (TAR) was constructed based on model A-E prostheses by software of Mimics 19.0, Geomagic wrap 2017, Creo 6.0, Hypermesh 14.0, and Abaqus 6.14. Finally, the differences of bone-metal prosthesis interface micromotion and articular surface contact behavior between different models were investigated under ISO gait load. RESULTS: The tibia/talus-metal prosthesis interfaces micromotion of the five TAR models gradually increased during the support phase, then gradually fell back after entering the swing phase. The improved models (models B-E) showed lower bone-metal prosthesis interface micromotion when compared with the original model (model A), but there was no significant difference among models A-E ( P>0.05). The maximum micromotion of tibia appeared at the dome of the tibial bone groove, and the ​​micromotion area was the largest in model A and the smallest in model E. The maximum micromotion of talus appeared at the posterior surface of the central bone groove, and there was no difference in the micromotion area among models A-E. The contact area of the articular surface of the insert/talus prosthesis in each group increased in the support phase and decreased in the swing phase during the gait cycle. Compared with model A, the articular surface contact area of models B-E increased, but there was no significant difference among models A-E ( P>0.05). The change trend of the maximum stress on the articular surface of the inserts/talus prosthesis was similar to that of the contact area. Only the maximum contact stress of the insert joint surface of models D and E was lower than that of model A, while the maximum contact stress of the talar prosthesis joint surface of models B-E was lower than that of model A, but there was no significant difference among models A-E ( P>0.05). The high stress area of the lateral articular surface of the improved inserts significantly reduced, and the articular surface stress distribution of the talus prosthesis was more uniform. CONCLUSION Adding a flexible layer in the insert can improve the elasticity of the overall component, which is beneficial to absorb the impact force of the artificial ankle joint, thereby reducing interface micromotion and improving contact behavior. The mechanical properties of the inserts designed with the platform type and thicker flexible layer are better.
Adult ; Male ; Humans ; Ankle ; Ankle Joint/surgery* ; Finite Element Analysis ; Tibia/surgery* ; Talus ; Stress, Mechanical ; Biomechanical Phenomena

OBJECTIVE: To establish finite element models of different preserved angles of osteonecrosis of the femoral head (ONFH) for the biomechanical analysis, and to provide mechanical evidence for predicting the risk of ONFH collapse with anterior preserved angle (APA) and lateral preserved angle (LPA). METHODS: A healthy adult was selected as the study object, and the CT data of the left femoral head was acquired and imported into Mimics 21.0 software to reconstruct a complete proximal femur model and construct 3 models of necrotic area with equal volume and different morphology, all models were imported into Solidworks 2022 software to construct 21 finite element models of ONFH with LPA of 45°, 50°, 55°, 60°, 65°, 70°, and 75° when APA was 45°, respectively, and 21 finite element models of ONFH with APA of 45°, 50°, 55°, 60°, 65°, 70°, 75° when LPA was 45°, respectively. According to the physiological load condition of the femoral head, the distal femur was completely fixed, and a force with an angle of 25°, downward direction, and a magnitude of 3.5 times the subject's body mass was applied to the weight-bearing area of the femoral head surface. The maximum Von Mises stress of the surface of the femoral head and the necrotic area and the maximum displacement of the weight-bearing area of the femoral head were calculated and observed by Abaqus 2021 software. RESULTS: The finite element models of ONFH were basically consistent with biomechanics of ONFH. Under the same loading condition, there was stress concentration around the necrotic area in the 42 ONFH models with different preserved angles composed of 3 necrotic areas with equal volume and different morphology. When APA was 60°, the maximum Von Mises stress of the surface of the femoral head and the necrotic area and the maximum displacement of the weight-bearing area of the femoral head of the ONFH models with LPA<60° were significantly higher than those of the models with LPA≥60° ( P<0.05); there was no significant difference in each index among the ONFH models with LPA≥60° ( P>0.05). When LPA was 60°, each index of the ONFH models with APA<60° were significantly higher than those of the models with APA≥60° ( P<0.05); there was no significant difference in each index among the ONFH models with APA≥60° ( P>0.05). CONCLUSION From the perspective of biomechanics, when a preserved angle of ONFH is less than its critical value, the stress concentration phenomenon in the femoral head is more pronounced, suggesting that the necrotic femoral head may have a higher risk of collapse in this state.
Adult ; Humans ; Femur Head/surgery* ; Finite Element Analysis ; Stress, Mechanical ; Femur/diagnostic imaging* ; Femur Head Necrosis/surgery*

Stress, Mechanical ; Biomechanical Phenomena ; Head ; Brain

In dentistry, orthodontic root resorption is a long-lasting issue with no effective treatment strategy, and its mechanisms, especially those related to senescent cells, remain largely unknown. Here, we used an orthodontic intrusion tooth movement model with an L-loop in rats to demonstrate that mechanical stress-induced senescent cells aggravate apical root resorption, which was prevented by administering senolytics (a dasatinib and quercetin cocktail). Our results indicated that cementoblasts and periodontal ligament cells underwent cellular senescence (p21⁺ or p16⁺) and strongly expressed receptor activator of nuclear factor-kappa B (RANKL) from day three, subsequently inducing tartrate-resistant acid phosphatase (TRAP)-positive odontoclasts and provoking apical root resorption. More p21⁺ senescent cells expressed RANKL than p16⁺ senescent cells. We observed only minor changes in the number of RANKL⁺ non-senescent cells, whereas RANKL⁺ senescent cells markedly increased from day seven. Intriguingly, we also found cathepsin K⁺p21⁺p16⁺ cells in the root resorption fossa, suggesting senescent odontoclasts. Oral administration of dasatinib and quercetin markedly reduced these senescent cells and TRAP⁺ cells, eventually alleviating root resorption. Altogether, these results unveil those aberrant stimuli in orthodontic intrusive tooth movement induced RANKL⁺ early senescent cells, which have a pivotal role in odontoclastogenesis and subsequent root resorption. These findings offer a new therapeutic target to prevent root resorption during orthodontic tooth movement.
Rats ; Animals ; Root Resorption/prevention & control* ; Senotherapeutics ; Stress, Mechanical ; Dasatinib/pharmacology* ; Quercetin/pharmacology* ; Osteoclasts ; Tooth Movement Techniques ; Periodontal Ligament ; RANK Ligand

Objective: To investigate the repair effect and JNK/NF-κB,SOX9 mechanisms of vibration exercise with different frequencies on articular cartilage in rats with early knee osteoarthritis. Methods: Forty-eight adult male SD rats were randomly divided into six groups(n=8):model control group(MC),high frequency vibration group 1 (GP₁,60 Hz),high frequency vibration 2 group (GP₂,40 Hz),medium frequency vibration group (ZP,20 Hz),minor frequency group(DP,10 Hz)and normal control group(NC). Except for NC group,the rats in each group were made into early knee osteoarthritis model after six weeks of knee joint cavity injection of papain solution and 2% mixture l-cysteine on the 1^st,4 ^th and 7^th day. Each exercise group was subjected vibration to 40 minutes a day with amplitude of 2～5 mm and 5 days a week. Four weeks later, the articular cartilage of the lateral femoral condyle of the both back leg knee joints were detected by HE staining,serine O staining and Mankin scores for morphological observation. The expression levels of JNK,NF-κB p65 and Sox9 mRNA in articular cartilage of the medial femoral condyle were detected by RT-qPCR,and the protein expressions of JNK,NF-κB p65 and Sox9 were detected by Western blot. Results: Compared with the NC group,the Mankin score in other groups was significantly higher (P＜0.01). Compared with the MC group,the Mankin score of each vibration group was significantly lower(P＜0.05),the mRNA and protein expressions of JNK and NF-κB p65 in each vibration training group were significantly lower (P＜0.01),the expressions of Sox9 mRNA and protein in vibration training group were increased significantly (P＜0.01). Compared with the higher frequency group,the Mankin score,the mRNA and protein expressions of JNK and NF-κB p65 of lower frequency group were significantly lower (P＜0.05 or P＜0.01). But the expressions of Sox9 mRNA and protein were significantly higher (P＜ 0.05 or P＜0.01). Conclusion: Vibration exercise of different frequencies may present varying degrees of cartilage repair impact in rats with early knee osteoarthritis,and the cartilage repair by low-frequency vibration training is better than that by high-frequency vibration. This can be one of the mechanisms on controlling collagen synthesis by down-regulating JNK/NF-κB expression and increasing SOX9 activity of OA articular cartilage.
Animals ; Cartilage, Articular/metabolism* ; MAP Kinase Kinase 4 ; Male ; NF-kappa B/metabolism* ; Osteoarthritis, Knee/therapy* ; RNA, Messenger/metabolism* ; Rats ; Rats, Sprague-Dawley ; SOX9 Transcription Factor ; Vibration

The present study explored the drying effect of new spiral vibration drying technology on Chinese medicinal pills with Liuwei Dihuang Pills, Zhuanggu Guanjie Pills, and Muxiang Shunqi Pills as model drugs. With the drying uniformity, drying time, energy consumption, pill split, dissolution time, and change of index components as evaluation indicators, the drying effect of spiral vibration drying technology on model drugs was evaluated and compared with traditional drying methods, such as hot air drying and vacuum drying in the oven. The dynamic changes of moisture in Liuwei Dihuang Pills with different drying time were investigated. Compared with the traditional drying methods in the oven(hot air drying and vacuum drying) at 80 ℃, the spiral vibration drying only took 80 min, shortened by 80%, with 10%-13% energy consumed. The results showed that the moisture of Liuwei Dihuang Pills was negatively related to the drying time. By virtue of multi-layer countercurrent drying and super resonant fluidization techniques, the new spiral vibration drying technology can significantly improve the drying quality of Chinese medicinal pills, improve the drying efficiency, and enhance the manufacturing capacity of Chinese medicinal pills. This study is expected to provide references for the innovation and development of new drying technology of Chinese medicinal pills.
China ; Desiccation ; Physical Therapy Modalities ; Technology ; Vibration