Objective: Several studies have highlighted the toxic potential of bisphenol A (BPA), however, BPA release from orthopedic devices remains poorly investigated.Therefore, this study aimed to evaluate BPA levels in the saliva of children treated using Haas expanders. Methods: Twenty-two children of both sexes aged 6–10 years who required rapid maxillary expansion were recruited. One week after placement of elastics to separate the permanent molars, orthodontic bands were adapted, and maxillary impressions were obtained using alginate impression material. Haas expanders were fabricated using a standardized amount of acrylic resin. The bands were cemented using Transbond Plus Light Cure Band (3M).Saliva samples were collected at five time points: before (T0) and 30 minutes (T1), 24 hours (T2), 1 week (T3), and 1 month (T4) after Haas expander installation.BPA levels were measured using ultra-high-performance liquid chromatography coupled with Tandem Mass Spectrometry. The results were evaluated using oneway analysis of variance with Tukey’s post-hoc test (alpha = 5%). Results: BPA levels were below the recommended tolerable daily intake (TDI) at all timepoints;however, salivary BPA levels at T1 (70.324 ng/mL ± 37.05) and at T2 (18.015 ng/mL ± 11.22) were significantly higher compared to that at T0 (0.475 ng/mL ± 0.27) (P < 0.05). Conclusions Salivary BPA levels significantly increased 30 minutes and 24 hours after Haas expander installation and return to baseline values after 1 week. BPA levels did not exceed the TDI, suggesting that the use of Haas expanders may be considered safe concerning BPA exposure in children.

Objective: Several studies have highlighted the toxic potential of bisphenol A (BPA), however, BPA release from orthopedic devices remains poorly investigated.Therefore, this study aimed to evaluate BPA levels in the saliva of children treated using Haas expanders. Methods: Twenty-two children of both sexes aged 6–10 years who required rapid maxillary expansion were recruited. One week after placement of elastics to separate the permanent molars, orthodontic bands were adapted, and maxillary impressions were obtained using alginate impression material. Haas expanders were fabricated using a standardized amount of acrylic resin. The bands were cemented using Transbond Plus Light Cure Band (3M).Saliva samples were collected at five time points: before (T0) and 30 minutes (T1), 24 hours (T2), 1 week (T3), and 1 month (T4) after Haas expander installation.BPA levels were measured using ultra-high-performance liquid chromatography coupled with Tandem Mass Spectrometry. The results were evaluated using oneway analysis of variance with Tukey’s post-hoc test (alpha = 5%). Results: BPA levels were below the recommended tolerable daily intake (TDI) at all timepoints;however, salivary BPA levels at T1 (70.324 ng/mL ± 37.05) and at T2 (18.015 ng/mL ± 11.22) were significantly higher compared to that at T0 (0.475 ng/mL ± 0.27) (P < 0.05). Conclusions Salivary BPA levels significantly increased 30 minutes and 24 hours after Haas expander installation and return to baseline values after 1 week. BPA levels did not exceed the TDI, suggesting that the use of Haas expanders may be considered safe concerning BPA exposure in children.

Patients with anteroposterior maxillary deficiency and mandibular prognathism associated with a long-face pattern exhibit reduced anterior and lateral projection of the zygomaticomaxillary complex. Several techniques have been combined with orthognathic surgery to enhance the volume and definition of this region, such as zygomatic osteotomy. Two female patients, aged 22 (Case A) and 29 (Case B), with class II (Case A) and III (Case B) malocclusion, respectively, complained about facial aesthetics due to a long face and lack of malar projection. Le Fort I osteotomy to advance the maxilla, bilateral mandibular ramus osteotomy to set back the mandible, mentoplasty for advancement and width reduction, and zygomatic osteotomy were erformed. The patients underwent computed tomography scans, and superimposed images indicated that a volumetric increase in the malar region was achieved through the anterolateral movement of the zygomatic body. Improvements were noted in the paranasal region (Case A), better alignment of the upper and lower lips, the chin region, and an improved chin-neckline ratio (in both cases). The patients were satisfied with the results and are under follow-up. In summary, zygomatic osteotomy combined with orthognathic surgery proved to be a predictable and safe strategy for increasing malar prominence, with satisfactory aesthetic and functional outcomes.

Objective: Several studies have highlighted the toxic potential of bisphenol A (BPA), however, BPA release from orthopedic devices remains poorly investigated.Therefore, this study aimed to evaluate BPA levels in the saliva of children treated using Haas expanders. Methods: Twenty-two children of both sexes aged 6–10 years who required rapid maxillary expansion were recruited. One week after placement of elastics to separate the permanent molars, orthodontic bands were adapted, and maxillary impressions were obtained using alginate impression material. Haas expanders were fabricated using a standardized amount of acrylic resin. The bands were cemented using Transbond Plus Light Cure Band (3M).Saliva samples were collected at five time points: before (T0) and 30 minutes (T1), 24 hours (T2), 1 week (T3), and 1 month (T4) after Haas expander installation.BPA levels were measured using ultra-high-performance liquid chromatography coupled with Tandem Mass Spectrometry. The results were evaluated using oneway analysis of variance with Tukey’s post-hoc test (alpha = 5%). Results: BPA levels were below the recommended tolerable daily intake (TDI) at all timepoints;however, salivary BPA levels at T1 (70.324 ng/mL ± 37.05) and at T2 (18.015 ng/mL ± 11.22) were significantly higher compared to that at T0 (0.475 ng/mL ± 0.27) (P < 0.05). Conclusions Salivary BPA levels significantly increased 30 minutes and 24 hours after Haas expander installation and return to baseline values after 1 week. BPA levels did not exceed the TDI, suggesting that the use of Haas expanders may be considered safe concerning BPA exposure in children.

Objective: Several studies have highlighted the toxic potential of bisphenol A (BPA), however, BPA release from orthopedic devices remains poorly investigated.Therefore, this study aimed to evaluate BPA levels in the saliva of children treated using Haas expanders. Methods: Twenty-two children of both sexes aged 6–10 years who required rapid maxillary expansion were recruited. One week after placement of elastics to separate the permanent molars, orthodontic bands were adapted, and maxillary impressions were obtained using alginate impression material. Haas expanders were fabricated using a standardized amount of acrylic resin. The bands were cemented using Transbond Plus Light Cure Band (3M).Saliva samples were collected at five time points: before (T0) and 30 minutes (T1), 24 hours (T2), 1 week (T3), and 1 month (T4) after Haas expander installation.BPA levels were measured using ultra-high-performance liquid chromatography coupled with Tandem Mass Spectrometry. The results were evaluated using oneway analysis of variance with Tukey’s post-hoc test (alpha = 5%). Results: BPA levels were below the recommended tolerable daily intake (TDI) at all timepoints;however, salivary BPA levels at T1 (70.324 ng/mL ± 37.05) and at T2 (18.015 ng/mL ± 11.22) were significantly higher compared to that at T0 (0.475 ng/mL ± 0.27) (P < 0.05). Conclusions Salivary BPA levels significantly increased 30 minutes and 24 hours after Haas expander installation and return to baseline values after 1 week. BPA levels did not exceed the TDI, suggesting that the use of Haas expanders may be considered safe concerning BPA exposure in children.

Objective: Several studies have highlighted the toxic potential of bisphenol A (BPA), however, BPA release from orthopedic devices remains poorly investigated.Therefore, this study aimed to evaluate BPA levels in the saliva of children treated using Haas expanders. Methods: Twenty-two children of both sexes aged 6–10 years who required rapid maxillary expansion were recruited. One week after placement of elastics to separate the permanent molars, orthodontic bands were adapted, and maxillary impressions were obtained using alginate impression material. Haas expanders were fabricated using a standardized amount of acrylic resin. The bands were cemented using Transbond Plus Light Cure Band (3M).Saliva samples were collected at five time points: before (T0) and 30 minutes (T1), 24 hours (T2), 1 week (T3), and 1 month (T4) after Haas expander installation.BPA levels were measured using ultra-high-performance liquid chromatography coupled with Tandem Mass Spectrometry. The results were evaluated using oneway analysis of variance with Tukey’s post-hoc test (alpha = 5%). Results: BPA levels were below the recommended tolerable daily intake (TDI) at all timepoints;however, salivary BPA levels at T1 (70.324 ng/mL ± 37.05) and at T2 (18.015 ng/mL ± 11.22) were significantly higher compared to that at T0 (0.475 ng/mL ± 0.27) (P < 0.05). Conclusions Salivary BPA levels significantly increased 30 minutes and 24 hours after Haas expander installation and return to baseline values after 1 week. BPA levels did not exceed the TDI, suggesting that the use of Haas expanders may be considered safe concerning BPA exposure in children.

Patients with anteroposterior maxillary deficiency and mandibular prognathism associated with a long-face pattern exhibit reduced anterior and lateral projection of the zygomaticomaxillary complex. Several techniques have been combined with orthognathic surgery to enhance the volume and definition of this region, such as zygomatic osteotomy. Two female patients, aged 22 (Case A) and 29 (Case B), with class II (Case A) and III (Case B) malocclusion, respectively, complained about facial aesthetics due to a long face and lack of malar projection. Le Fort I osteotomy to advance the maxilla, bilateral mandibular ramus osteotomy to set back the mandible, mentoplasty for advancement and width reduction, and zygomatic osteotomy were erformed. The patients underwent computed tomography scans, and superimposed images indicated that a volumetric increase in the malar region was achieved through the anterolateral movement of the zygomatic body. Improvements were noted in the paranasal region (Case A), better alignment of the upper and lower lips, the chin region, and an improved chin-neckline ratio (in both cases). The patients were satisfied with the results and are under follow-up. In summary, zygomatic osteotomy combined with orthognathic surgery proved to be a predictable and safe strategy for increasing malar prominence, with satisfactory aesthetic and functional outcomes.

Patients with anteroposterior maxillary deficiency and mandibular prognathism associated with a long-face pattern exhibit reduced anterior and lateral projection of the zygomaticomaxillary complex. Several techniques have been combined with orthognathic surgery to enhance the volume and definition of this region, such as zygomatic osteotomy. Two female patients, aged 22 (Case A) and 29 (Case B), with class II (Case A) and III (Case B) malocclusion, respectively, complained about facial aesthetics due to a long face and lack of malar projection. Le Fort I osteotomy to advance the maxilla, bilateral mandibular ramus osteotomy to set back the mandible, mentoplasty for advancement and width reduction, and zygomatic osteotomy were erformed. The patients underwent computed tomography scans, and superimposed images indicated that a volumetric increase in the malar region was achieved through the anterolateral movement of the zygomatic body. Improvements were noted in the paranasal region (Case A), better alignment of the upper and lower lips, the chin region, and an improved chin-neckline ratio (in both cases). The patients were satisfied with the results and are under follow-up. In summary, zygomatic osteotomy combined with orthognathic surgery proved to be a predictable and safe strategy for increasing malar prominence, with satisfactory aesthetic and functional outcomes.

Background: Roux-en-Y gastric bypass (RYGB) is a standard treatment for severe obesity, but some patients do not achieve the expected success in weight loss. The aim of this study was to evaluate possible predictors of weight loss after RYGB. Methods: Sixty-three patients were included. Pre- and postoperative data were collected from medical records, including comorbidities, anthropometry, energy/macronutrient intake, and physical activity level (PAL). Variants in the brain-derived neurotrophic factor (BDNF; rs6265) and lysophospholipase like 1 (LYPLAL1; rs4846567) genes were investigated. Excess weight loss (EWL) >50% was considered to be successful weight loss (SWL). Logistic regression models were used to verify predictor variables. Results: Participants’ median preoperative body mass index (BMI) was 53 kg/m 2 (interquartile range, 46 to 58).At 12 and 24 months after surgery, EWL was 63% and 67%, and the failure rate was 19% and 16%, respectively.The individuals with insufficient weight loss (IWL) after 12 months had higher preoperative weight, BMI, and overweight. At 24 months, lowest frequency of individuals with SWL in the first year was found in the IWL group.No significant differences were found between the groups in dietary intake and PAL. In the logistic regression, high initial BMI was a predictor of the worst response in both periods, and high initial total weight loss was a predictor of a better response at 24 months. The polymorphism analysis did not show differences between groups in either gene. Conclusion Lower preoperative BMI and greater weight loss at 12 months were predictors of SWL after RYGB.

Objectives: Digital health (DH) is a revolution driven by digital technologies to improve health. Despite the importance of DH, curricular updates in healthcare university programs are scarce, and DH remains undervalued. Therefore, this report describes the first Junior Scientific Committee (JSC) focusing on DH at a nationwide congress, with the aim of affirming its importance for promoting DH in universities. Methods: The scientific committee of the Brazilian Congress of Health Informatics (CBIS) extended invitations to students engaged in health-related fields, who were tasked with organizing a warm-up event and a 4-hour session at CBIS. Additionally, they were encouraged to take an active role in a workshop alongside distinguished experts to map out the current state of DH in Brazil. Results: The warm-up event focused on the topic “Artificial intelligence in healthcare: is a new concept of health about to arise?” and featured remote discussions by three professionals from diverse disciplines. At CBIS, the JSC’s inaugural presentation concentrated on delineating the present state of DH education in Brazil, while the second presentation offered strategies to advance DH, incorporating viewpoints from within and beyond the academic sphere. During the workshop, participants deliberated on the most crucial competencies for future professionals in the DH domain. Conclusions Forming a JSC proved to be a valuable tool to foster DH, particularly due to the valuable interactions it facilitated between esteemed professionals and students. It also supports the cultivation of leadership skills in DH, a field that has not yet received the recognition it deserves.