ObjectiveTo investigate the effects of morin treatment on bone metabolism and bone mass in aged rats， and to clarify the possible mechanism. MethodsTen young female Sprague-Dawley rats （3 months old） and 20 old female Sprague-Dawley rats （24 months old） were randomly divided into three groups： Control group （CON， 10 young rats）； Model group （MOD， 10 young rats）； 10 old rats and SangHuangSu Group （SSS， 10 old rats）. During the experiment， the SSS group received intraperitoneal injection of morin （10 mg / kg） daily. The treatment lasted for 12 weeks. After treatment， Micro-CT， HE stained sections， serological tests and Western blot were used to observe the treatment effect and possible mechanism. ResultsAfter 12 weeks of treatment， compared with MOD group， the number and density of bone trabeculae in SSS group were significantly improved. The BMD， Conn. D， Tb. N， Tb.Th and Tb.Sp of the left femur in the SSS group were significantly better than those in the MOD group（P <0.05）. After 12 weeks of treatment， the levels of CTX-1， osteocalcin， TRACP-5b and PINP in SSS group were significantly lower than those in MOD group（P <0.05）. Compared with the MOD group， the ERK1/2-p38 signal pathway was significantly inhibited and the levels of ERK1/2 and p38 were significantly decreased in the SSS group（P <0.05）. ConclusionMorin pigment mediates the protective effect on the bones of aged rats by inhibiting the ERK1/2-p38 signaling pathway and reducing bone turnover.

Objective To observe the daily bladder and bowel preparation of patients with prostate cancer by cone-beam computed tomography (CBCT), and analyze its impact on the precise implementation of radiotherapy for prostate cancer and side effects. Methods We retrospectively analyzed 38 patients with prostate cancer who underwent volumetric modulated arc therapy. The number of radiation fractions for each patient ranged from 25 to 35. A CBCT scan was performed before each daily radiation therapy, and the number of scans for each patient ranged from 25 to 40. Setup errors were adjusted to ensure that the tumor was targeted and the rectum wall was not in the high-dose target area of the prostate. There were 93 instances where treatment could not be successfully implemented and re-preparation and re-scanning were required. We calculated the success rate of treatment and setup errors, compared radiotherapist-adjusted error values under different bladder and bowel preparation conditions, and recorded radiotherapy-related side effects. Results The success rate of treatment in the 38 patients was (92.14 ± 5.25)%. Among the 93 instances of seriously inadequate preparation, 48.4% were due to insufficient bladder filling, and 30.1% were due to intestinal bloating. Radiotherapy side effects were negatively correlated with the success rate of treatment (r = −0.393, P = 0.015). When bladder filling was sufficient, there were no significant differences in radiotherapist-adjusted error values in the left-right (LR), superior-inferior (SI), and anterior-posterior (AP) directions between adequate and inadequate bowel preparation (P > 0.05). When the bladder was moderately or insufficiently filled, there were significant differences in radiotherapist-adjusted error values in the LR, SI, and AP directions between adequate and inadequate bowel preparation (P < 0.05). Conclusion Insufficient bladder filling and intestinal bloating are the main factors influencing the successful implementation of radiotherapy for prostate cancer. When the bladder is sufficiently filled, bowel preparation does not affect prostate position change.

ObjectiveTo explore the influencing factors of occupational hand-arm vibration disease (OHAVD) caused by handheld workpiece polishing. Methods A total of 222 OHAVD patients (case group), 275 hand-transmitted vibration-exposed workers (exposed group) and 243 healthy workers without hand-transmitted vibration exposure (control group) in a sports equipment manufacturing enterprise were selected as the study subjects using the convenience sampling method. Worksite survey of occupational health was conducted on these three groups, and the human vibration measurement equipment was used to measure the vibration exposure level of handheld vibration among the study subjects. The 8-hour energy equivalent frequency-weighted vibrating acceleration ［A(8)］ and cumulative vibration exposure level (CVEL) were calculated. Results The prevalence of coldness, numbness, tingling fingers, and vibration-induced white finger was higher in the exposed group and the case group compared with the control group (all P<0.05). The prevalence of the above-mentioned hand symptoms was higher in the case group compared with the exposed group (all P<0.05). The A(8) and CVEL levels of the study subjects in the case group were higher than those in the exposed group (all P<0.05). Binary logistic analysis result showed that age and CVEL were both influencing factors of OHAVD (all P<0.05). According to the restricted cubic spline models, CVEL of the study subjects in the exposed group had a positive nonlinear dose-response relationship with the risk of OHAVD (overall trend P<0.01, nonlinear P<0.01), indicating an increasing risk of OHAVD with increasing CVEL. Conclusion Hand-transmitted vibration exposure is a risk factor for OHAVD. Early intervention should be carried out for hand-transmitted vibration-exposed individuals to reduce vibration-exposed levels and control vibration exposure time.

Objective To investigate the level of finger systolic blood pressure (FSBP) in healthy young adults. Methods A total of 28 healthy young adults were selected as the study subjects by convenient sampling method. The FSBP of the study subjects was detected at 30 and 10 ℃, and the FSBP index (F_i) was calculated. Results The FSBP of the study subjects at 30 and 10 ℃ were (102.0±16.5) and (104.4±15.2) mmHg, respectively. The FSBP in male group at 30 and 10 ℃ was (99.6±18.6) and (107.2±17.0) mmHg, respectively. The FSBP in female group at 30 and 10 ℃ was (104.4±13.9) and (101.5±2.8) mmHg, respectively. The results of factorial analysis showed that the interaction between gender and temperature on FSBP was statistically significant (P<0.05). FSBP in male group was higher at 10 than 30 ℃ (P<0.05) and higher than female group at 10 ℃ (P<0.05). There was no statistical significance for the main effect of gender, temperature, finger, or the interaction effect of gender and finger, temperature and finger for FSBP (all P>0.05). The average F_i of the study subjects was (98.0±16.6)%, with males and females having the average F_i of (100.7±20.7) % and (95.2±10.6) % respectively. The results of factorial analysis of variance showed that there was no significant difference on F_i in the main effect gender and fingers or the interaction effect between them(all P>0.05). Conclusion The FSBP test could be used as a detection method for assessing peripheral microcirculation function in Chinese population. However, further research is needed to establish reference ranges and influencing factors.

Objective:To explore the effects of bladder volumes from CT simulation on bladder volume consistency and set-up errors during radiotherapy for prostate cancer, aiming to provide a reference for clinical practice.Methods:A retrospective analysis was conducted for of 66 prostate cancer patients treated with intensity-modulated radiation therapy in the Sun Yat-sen University Cancer Center from August 2015 to November 2020. They underwent CT scan or radiotherapy after voluntarily holding in urine. Cone beam computed tomography (CBCT) scans were performed for them to measure their set-up errors in left-right (L-R), superior-inferior (S-I), and anterior-posterior (A-P) directions before each treatment. The bladder contours of the patients were delineated on CT simulation images and CBCT images. Accordingly, bladder volumes were calculated. Based on the calculated bladder volumes derived from the CT simulation images, the patients were divided into three groups: 18 cases in the 200-300 ml group, 24 cases in the 300-400 ml group, and 24 cases in the >400 ml group. Finally, this study analyzed the effects of bladder volumes derived from CT simulation on set-up errors and the changes of CBCT-derived bladder volumes relative to planned volumes during radiotherapy.Results:The bladder volumes in the 200-300 ml, 300-400 ml, and >400 ml groups during radiotherapy were reduced by 15%, 26%, and 32%, respectively. The pairwise comparison indicates statistically significant differences in the changes of bladder volumes among the three groups ( Z=3.43, 7.97, 4.83, P<0.05). Regarding the three-dimensional set-up errors, there were statistically significant differences in S-I set-up errors among the three groups ( H=26.72, P<0.05), but there was no statistically significant difference in L-R and A-P set-up errors ( P>0.05) among these groups. The 200-300 ml, 300-400 ml, and >400 ml groups exhibited S-I set-up errors of 0.00 (-0.20, 0.20) cm, 0.00 (-0.20, 0.30) cm, and -0.10 (-0.30, 0.20) cm, respectively. Therefore, the >400 ml group displayed larger the S-I set-up errors than other two groups, with statistically significant differences ( Z=4.17, 4.66, P< 0.05), while there was no statistically significant differences in S-I set-up errors between other two groups ( P> 0.05). Conclusions:Controlling the bladder filling volumes at 200-300 ml in CT simulation is beneficial for maintaining bladder volume consistency and reducing set-up errors of patients during radiotherapy.

Background Wearing anti-vibration gloves is a simple and effective way to prevent hand-arm vibration disease. The requirements for vibration damping gloves are varied by types of operations exposed to vibration. Objective To study the vibration attenuation and dexterity of different types of protective gloves, and to provide reference for scientific wearing of vibration damping gloves for people working with vibration exposure. Methods Nine kinds of common protective gloves (A and B were dipping gloves; C, D, and E were rubber gloves; F and G were textile and fabric gloves; H was cotton gloves; I was leather gloves) used by workers exposed to vibration in 28 factories in Guangdong Province were selected as research objects by typical case sampling method, and the basic parameters of included protective gloves were investigated and measured. According to ISO 10819:2013, a glove vibration transmissibility (GVT) test system was used to detect the vibration transmissibility values and analyze vibration attenuation characteristics of the subjects wearing different protective gloves. The dexterity was tested by Minnesota Manual Dexterity Test. Pearson test was used to analyze the correlations among glove thickness, vibration transmissibility, dexterity score, and grip strength score. Results For rubber gloves (C, D, and E), the associated average adjusted vibration transmissibility at middle and low frequencies \begin{document}$ {\overline T _{\text{M}}} $\end{document} and average adjusted vibration transmissibility at high frequency \begin{document}$ {\overline T _{\text{H}}} $\end{document} were lower than those of other gloves (0.89-0.91 and 0.59-0.80 respectively), the vibration transmissibility values of 50-200 Hz frequency band was 0.81-0.97, and the vibration transmissibility values of 315-1250 Hz frequency band decreased with the increase of frequency (the minimum value was 0.13). For other types of gloves (A, B, F, G, H, and I), the \begin{document}$ {\overline T _{\text{M}}} $\end{document} and \begin{document}$ {\overline T _{\text{H}}} $\end{document} were 0.95-0.98 and 1.03-1.11 respectively, the vibration transmissibility values of 50-200 Hz frequency band was 0.96-1.02, and the vibration transmissibility values of 400-1250 Hz frequency band increased (the maximum value was 1.29). The \begin{document}$ {\overline T _{\text{M}}} $\end{document}, \begin{document}$ {\overline T _{\text{H}}} $\end{document}, and vibration transmissibility values of 40-1250 Hz frequency band of rubber gloves with double-layer protective materials (C, D, and E) were significantly lower than those of gloves with single-layer protective materials. But the \begin{document}$ {\overline T _{\text{M}}} $\end{document} and \begin{document}$ {\overline T _{\text{H}}} $\end{document} of gloves of other types with double-layer materials (F, H, and I) were still greater than 0.9 and 1.0 respectively. Compared with single-layer protective materials, the gloves of other types with double-layer materials showed no significant changes in the vibration transmissibility values of 25-200 frequency band (0.91-1.06), and an increase in the vibration transmissibility values of 250-630 Hz frequency band (the maximum value was 1.22). The dexterity scores and grip strength scores of dipping gloves (A and B) were the lowest. Rubber gloves C had the highest dexterity score and grip strength score. The thickness of protective gloves was negatively correlated with the vibration transmissibility values, and positively correlated with the dexterity score and the grip strength score (P < 0.05). The vibration transmissibility value was negatively correlated with the dexterity score and the grip strength score (P < 0.05). Conclusion Among the 9 kinds of gloves, cotton gloves and leather gloves have no damping effect. Rubber gloves have certain vibration reduction effect, and the vibration reduction effect on high frequency band is better than that on low frequency band. The thicker the damping material is, the better the damping effect is, but the less the dexterity is. Appropriate damping gloves should be selected according to actual vibration operations.

Objective:To establish a disease risk prediction model for the newborn screening system of inherited metabolic diseases by artificial intelligence technology.Methods:This was a retrospectively study. Newborn screening data ( n=5 907 547) from February 2010 to May 2019 from 31 hospitals in China and verified data ( n=3 028) from 34 hospitals of the same period were collected to establish the artificial intelligence model for the prediction of inherited metabolic diseases in neonates. The validity of the artificial intelligence disease risk prediction model was verified by 360 814 newborns ' screening data from January 2018 to September 2018 through a single-blind experiment. The effectiveness of the artificial intelligence disease risk prediction model was verified by comparing the detection rate of clinically confirmed cases, the positive rate of initial screening and the positive predictive value between the clinicians and the artificial intelligence prediction model of inherited metabolic diseases. Results:A total of 3 665 697 newborns ' screening data were collected including 3 019 cases ' positive data to establish the 16 artificial intelligence models for 32 inherited metabolic diseases. The single-blind experiment ( n=360 814) showed that 45 clinically diagnosed infants were detected by both artificial intelligence model and clinicians. A total of 2 684 cases were positive in tandem mass spectrometry screening and 1 694 cases were with high risk in artificial intelligence prediction model of inherited metabolic diseases, with the positive rates of tandem 0.74% (2 684/360 814)and 0.46% (1 694/360 814), respectively. Compared to clinicians, the positive rate of newborns was reduced by 36.89% (990/2 684) after the application of the artificial intelligence model, and the positive predictive values of clinicians and artificial intelligence prediction model of inherited metabolic diseases were 1.68% (45/2 684) and 2.66% (45/1 694) respectively. Conclusion:An accurate, fast, and the lower false positive rate auxiliary diagnosis system for neonatal inherited metabolic diseases by artificial intelligence technology has been established, which may have an important clinical value.

OBJECTIVE: To investigate the effect of hand-transmitted vibration on the subjective symptoms of mine drilling workers. METHODS: A total of 117 mine drilling workers exposed to hand-transmitted vibration were selected as the exposure group, and 46 workers without hand-transmitted vibration exposure were selected as control group by judgment sampling method. The Occupational Epidemiology Questionnaire of Mine Drilling Workers was used to investigate their subjective symptoms. RESULTS: The prevalence of tinnitus, hearing loss, cough and sputum in the exposure group was higher than that in the control group(P<0.05). The occurrence rate of numbness, tingling, self-reported white fingers and cold hands in the exposure group was higher than that in the control group(P<0.05). The total rate of symptoms of hand in the exposure group was higher than that in the control group(38.5% vs 21.7%, P<0.05). The multivariate logistic regression analysis results indicated that hand-transmitted vibration exposure and service length were risk factors of abnormal hand symptoms(P<0.05). CONCLUSION: Occupational hand-transmitted vibration exposure can affect the hand subjective symptoms of mine drilling workers, and the length of service is a synergistic influencing factor.

OBJECTIVE: To investigate the subjective symptoms of eyes induced by laser radiation in workers and its related influencing factors. METHODS: A total of 82 workers exposed to laser radiation were taken as exposure group, and 71 workers without laser radiation exposure as control group by judgment sampling method. The questionnaire survey and subjective symptoms of eyes were surveyed in these two groups. The work-site surveys of laser radiation job posts and laser irradiation testing were conducted to evaluate the exposure level of laser radiation on each post. The basic eye use and eye discomfort symptoms were investigated. RESULTS: The median of the laser radiation in 12 workplaces was 2.18×10~(-5) W/cm~2, and it was below occupational exposure limit(2.22×10~(-3) W/cm~2). The total detection rate of subjective discomfort of eyes in the exposed group was significantly higher than that in the control group(35.4% vs 15.5%, P<0.05). The results of multivariate logistic regression analysis indicated that laser exposure and smoking were the risk factors of subjective symptoms of eyes(P<0.05). CONCLUSION: Laser radiation operation has the risk of causing the subjective symptoms of eyes in exposed workers.

OBJECTIVE: To analyze the characteristics of noise hazard in a nuclear power station. METHODS: The workplaces and working posts which exposed to occupational noise from two 1 000 MW power units in one nuclear power station in Guangdong Province was selected as study subjects using the convenience sampling method. Occupational health survey, noise measurement in the workplace and personal noise dosage measurement were used to monitor noise exposure, and to analyze the characteristics of occupational noise in the nuclear power station. RESULTS: The noise sources of the nuclear power plant were mainly distributed in the nuclear island, conventional island, and peripheral workshops. A total of 237 points of noise intensity were measured in the workplace. The intensity of noise ranged from 66.0 to 99.6 dB(A). The noise intensity in 62.4%(148/237) of points was equal or greater than 80.0 dB(A) and 34.2%(81/237) equal or greater than 85.0 dB(A). The percentage of detection points with noise intensity was equal or greater than 85.0 dB(A) from low to high were nuclear island, conventional island, and peripheral workshops with 22.0%, 37.5% and 53.8% respectively(P<0.01). The personal noise intensity of three positions including inspectors of operation department, preparation and main engine positions of mechanical department exceeded the occupational exposure limit(OEL), and the percentage of positions whose noise intensity exceeded the OEL was 9.7%(3/31). CONCLUSION: High-intensity noise sources of the nuclear power plant are widely distributed in the workshop areas of nuclear island, conventional island, and peripheral workshops. The noise level of some positions exceeded the standards of noise intensity. The prevention and control measures of noise hazards in posts with excessive noise should be strengthened.