Jaw defects caused by various reasons often seriously affect appearance and function. The goal of the treatment of oral and maxillofacial tumors should include the cure of the tumor and the restoration of premorbid function. The development of microsurgery and digital surgery technology has promoted the development of jaw reconstruction with vascularized free bone flap. Good appearance and improved predictability could be obtained with the help of preope-rative visual design. How to rehabilitate occlusal function on the reconstructed jaw and improve the quality of life of patients has become an important research direction. This article discusses the challenge of jaw reconstruction, the selection of vascularized bone flap, the choice of implant timing, the treatment of peri-implant soft tissue, and the influence of radiotherapy on implants after jaw reconstruction.
Humans ; Dental Implants ; Plastic Surgery Procedures ; Free Tissue Flaps/surgery* ; Quality of Life ; Dental Implantation, Endosseous ; Fibula/surgery* ; Bone Transplantation ; Mandibular Reconstruction

At present, mandibular defect repair and reconstruction is not only a simple sense of mandibular continuity restoration, but also a restoration of the physiologically positional relationship and movement balance of the upper and lower jaws. Eventually, the implantation of osseointegrated dental implants and implant-supported dental restoration should be accomplished to complete the reconstruction of the functional mandible. The technique can integrate multiple procedures such as fibular bone grafting, simultaneous dental implants and traction osteogenesis, and the perfect integration with digital technology can significantly improve the accuracy of digital dental implant traction technique. This paper will summarize and conclude the key points of the application of digital dental implant traction technique in mandibular defect reconstruction, in order to provide new ideas for the development of digital technique.
Humans ; Mandibular Reconstruction ; Dental Implants ; Dental Implantation, Endosseous/methods* ; Mandibular Neoplasms/surgery* ; Fibula/transplantation* ; Bone Transplantation/methods* ; Mandible/surgery*

The present study investigates Mg-SiO
Magnesium ; Mandibular Reconstruction ; Materials Testing ; Nanocomposites ; Silicon Dioxide

OBJECTIVE: To investigate the position change of the fibular bone after maxillary reconstruction by free fibular flap and to analyze the factors affecting the position change. METHODS: Patients who underwent maxillary reconstruction by free fibular flap in the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from November 2012 to November 2016 were enrolled in this study. CT scans 1 week and 1 year postoperatively were collected and stored in DICOM format. The ProPlan CMF software was used to reconstruct the CT scans and separate the maxilla and each segment of the fibular flap. The Geomagic Control software was used to measure the long axis direction vector of each fibular segment. And the position change direction was recorded. The patients were divided into groups according to the use of the fibula or titanium plate to reconstruct the zygomaticmaxillary buttress. RESULTS: A total of 32 patients were enrolled. Among them, 21 were in the titanium plate group and 11 in the fibula bone group. The angle between the long axis of the fibular segment and the X axis in the X-Y plane was 95.65°±53.49° and 95.53°±52.77°, 1 week and 1 year postoperatively, and there was no statistical difference (P>0.05). The angle between the long axis of the fibular segment and the X axis in the X-Z plane was 96.88°±69.76° and 95.33°±67.42°, respectively, with statistical difference (P=0.0497). The angular changes of the long axis of the fibular segment in the titanium plate group and the fibular bone group were 3.23°±3.93° and 1.94°±1.78°, respectively, and the angular changes in the X-Z plane were 6.02°±9.89° and 3.27°±2.31°, respectively. There was no significant difference between the groups (P>0.05). The long axis changes of the fibular segment in the X-Y plane for reconstruction of the anterior alveolar, posterior alveolar, and buttress were 3.13°±3.78°, 2.56°±3.17°, and 5.51°±4.39°, respectively. There was a statistical difference (P = 0.023) between the posterior and buttress. In the X-Z plane, theses were 4.94°±4.75°, 5.26°±10.25°, 6.69°±6.52°, respectively. There was no statistical difference among the three groups (P>0.05). The main positional deviation directions of the titanium plate group and the fibular bone group were interior and superior sides, and there was no statistical difference between the two groups (P>0.05). CONCLUSION One year postoperatively, the position of the free fibular flap was changed compared with 1 week postoperatively. The position of the free fibular flap was mainly changed to the interior and superior sides.
Bone Transplantation ; Fibula/diagnostic imaging* ; Free Tissue Flaps ; Humans ; Mandibular Reconstruction ; Maxilla/surgery*

OBJECTIVES: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. MATERIALS AND METHODS: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. RESULTS: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups (2.6±1.3 days), while the RP group required the least number of days to reach an 80% recovery rate (7.8±2.2 days). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. CONCLUSION: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.
Bone Transplantation ; Cone-Beam Computed Tomography ; Eating ; Mandible ; Mandibular Reconstruction ; Models, Animal ; Osteogenesis ; Printing, Three-Dimensional ; Rabbits ; Transplants

Mandible is an important bone of the head and neck. Mandibular defects not only affect patient's face, but also impede patient's daily functions, such as chewing, speech, and so on. Fibular transplantation for mandibular reconstruction is the common method, which requests high accuracy of bone positioning and posture adjustment. Therefore, a robotic system for mandibular reconstruction surgery with fibula flaps was designed to assist surgeons to hold and locate bones, and the model comparison experiments were conducted. The results showed that the robotic system can assist surgeons for mandibular reconstruction to improve quality of surgery.
Bone Transplantation ; methods ; standards ; Fibula ; transplantation ; Humans ; Mandible ; surgery ; Mandibular Reconstruction ; methods ; Robotics ; standards ; Surgery, Computer-Assisted

BACKGROUND: Condylar dislocation can arise as a complication in patients who required mandibular and/or condylar reconstruction and were operated on with fibula free flap (FFF) using surgical guides designed using simulation surgery. Surgeons should be aware of the complications in these present cases when planning and performing reconstructions as well as predicting prognoses. CASES PRESENTATION: Two cases showed condylar dislocation in mandibular reconstruction using a FFF fixed with a reconstruction plate. Three cases showed condylar dislocation in mandibular reconstruction using a fibula free flap fixed with a mini-plate. CONCLUSION: Despite the lack of clinical symptoms in these cases following mandibular reconstruction using an FFF, the mandibular condyle was severely displaced away from the glenoid fossa. A surgeon must have sufficient time to consider the use of a long flap with thickness similar to that of the mandible, ways to minimize span and bending, and methods of fixation. The patient, moreover, should be educated on condylar dislocation. Customized CAD/CAM-prototyped temporomandibular condyle-connected plates may be a good alternative even if virtual simulation surgery is to be performed before surgery. These considerations may help reduce the incidence of complications after mandibular reconstruction.
Dislocations ; Fibula ; Free Tissue Flaps ; Humans ; Incidence ; Mandible ; Mandibular Condyle ; Mandibular Reconstruction ; Prognosis ; Surgeons

Ameloblastoma is a benign odontogenic epithelial tumor with high recurrence rate and requires extensive resection of the surrounding tissue and reconstruction of defect site. Because of the anatomical limitation of the reconstruction site, prosthetic treatment with implants is the first recommendation. This is a case of prosthetic restoration of the reconstruction site with implant fixed prosthesis in patient who underwent mandibular resection and iliac bone reconstruction due to ameloblastoma. However 14 months after completion of implant prosthesis, adjacent natural tooth erupted unexpectedly, resulting in 1mm infra-occlusion occurred including posterior implant prosthesis and anterior natural teeth. In adults, implant infra-occlusion may occur due to residual growth after placement of the maxillary anterior implant. But this case, hypo-occlusion of molar implant and open bite of anterior natural teeth is occurred due to extrusion of adjacent tooth, is rare. Thus we report the treatment process including orthodontic treatment with intrusion of the posterior tooth, and investigate the causes of sudden, unexpected tooth extrusion.
Adult ; Ameloblastoma ; Humans ; Mandibular Reconstruction ; Molar ; Open Bite ; Orthodontic Extrusion ; Prostheses and Implants ; Recurrence ; Tooth

BACKGROUND: The mandible is an important structure that is located in the lower third of the face. Large mandibular defects after tumor resection cause loss of its function. This study assessed the outcomes and tumor recurrence after immediate mandibular reconstruction using a free fibula osteocutaneous flap following radical resection of ameloblastoma. METHODS: This is a retrospective non-randomized study of outcomes and tumor recurrence of all patients diagnosed with mandibular ameloblastoma from August 1997 until August 2017 (20 years) requiring free fibula osteocutaneous flap reconstruction at a single institution. The patients were identified through an electronic operative database; subsequently, their medical records and photo documentation were retrieved. RESULTS: Twenty-seven patients were included in this study. Eighteen patients were male, while nine were female. The majority of the patients (48.1%) were in their third decade of life when they were diagnosed with ameloblastoma. All of them underwent radical resection of the tumor with a surgical margin of 2 cm (hemimandibulectomy in cases with a large tumor) and immediate mandibular reconstruction with a free fibula osteocutaneous flap. Two patients required revision of a vascular anastomosis due to venous thrombosis postoperatively, while one patient developed a flap recipient site infection. The flap success rate was 100%. There was no tumor recurrence during a mean follow-up period of 5.6 years. CONCLUSIONS: Mandibular ameloblastoma should be treated with segmental mandibulectomy (with a surgical margin of 2 cm) to reduce the risk of recurrence. Subsequent mandibular and adjacent soft tissue defects should be reconstructed immediately with a free fibula osteocutaneous flap.
Ameloblastoma ; Female ; Fibula ; Follow-Up Studies ; Free Tissue Flaps ; Humans ; Male ; Mandible ; Mandibular Osteotomy ; Mandibular Reconstruction ; Medical Records ; Recurrence ; Retrospective Studies ; Venous Thrombosis

Mandibular defects lead to severe deformation and functional deficiency. Vascularized osteocutaneous tissue has been widely used to reconstruct the mandible. However, it is technically challenging to shape this type of grafts in such a manner that they resemble the configuration of the mandible. A 48-year-old female patient who underwent anterolateral thigh (ALT) flap coverage after a tongue cancer excision was diagnosed with a tumor recurrence during the follow-up. A wide excision mandibulectomy and mandibular reconstruction with an ALT flap and a titanium implant were performed. The prefabricated titanium implant was fixed to the condyle. Then, an ALT flap was harvested from the ipsilateral thigh and anastomosed. After confirming that the circulation of the flap was intact, the implant was fixed to the parasymphysis. On the radiograph taken after the surgery, the prosthesis was well positioned and overall facial shape was acceptable. There was no postoperative complication during the follow-up period, 1 year and 2 months. The prefabricated implant allows the restoration of facial symmetry without harvesting autologous bone and it is a safe and effective surgical option for mandibular reconstruction.
Female ; Follow-Up Studies ; Humans ; Mandible ; Mandibular Prosthesis Implantation ; Mandibular Reconstruction* ; Middle Aged ; Postoperative Complications ; Prostheses and Implants ; Recurrence ; Thigh ; Titanium* ; Tongue Neoplasms ; Transplants