Objective To analyze the effect of residual cholesterol (RC) on hearing loss in noise-exposed workers. Methods A total of 3 412 workers engaged in noise operation work in an underground railway enterprise were selected as the research subjects using the judgment sampling method. Their occupational health examination data were collected to analyze the relationship between RC and hearing loss. Results The noise intensity of workplace in the underground rail enterprise was 80.0-85.0 (81.4±3.2) dB(A). The detection rate of hearing loss was 20.2% (691/3 412). The rates of abnormal total cholesterol, triacylglycerol, high density lipoprotein cholesterol (HDL-C) and low density lipoprotein cholesterol were 35.6%, 25.7%, 9.5% and 42.4%, respectively. The median and the 25th and 75th percentiles [M(P₂₅,P₇₅)] of RC level were 0.24 (0.15, 0.37) mmol/L. The levels of total cholesterol, triacylglycerol and RC of workers in hearing loss group were higher than those in normal hearing group [M(P₂₅,P₇₅): 4.91(4.37, 5.58) vs 4.84(4.30, 5.46) mmol/L, 1.29(0.91, 1.93) vs 1.16(0.82, 1.67) mmol/L, 0.26(0.16, 0.41) vs 0.24(0.14, 0.37) mmol/L, all P<0.05]. The detection rate of hearing loss in abnormal triglyceride group was higher than that in normal triglyceride group (24.8% vs 18.7%, P<0.01), and the detection rate of hearing loss in abnormal HDL-C group was higher than that in normal HDL-C group (25.0% vs 19.8%, P<0.05). The higher the serum RC level, the higher the detection rate of hearing loss (P<0.01). Multivariate logistic regression result showed that individual with older age, longer work time and higher serum RC level had higher risk of hearing abnormality (all P<0.05), and the risk of hearing abnormality was higher in patients with abnormal fasting blood glucose than patients with normal faseing blood glucose (P<0.05) after controlling for confounding factors such as gender, alcohol consumption, body mass index, and elevated blood pressure. However, abnormal triacylglycerol and HDL-C levels were not significantly related to the risk of hearing abnormality (both P>0.05). Conclusion Serum RC levels are an independent risk factor for hearing loss among noise-exposed workers exposed to noise level of 80.0-85.0 dB(A) in the workplace.

Exercise fatigue is a complex physiological and psychological phenomenon that includes peripheral fatigue in the muscles and central fatigue in the brain. Peripheral fatigue refers to the loss of force caused at the distal end of the neuromuscular junction, whereas central fatigue involves decreased motor output from the primary motor cortex, which is associated with modulations at anatomical sites proximal to nerves that innervate skeletal muscle. The central regulatory failure reflects a progressive decline in the central nervous system’s capacity to recruit motor units during sustained physical activity. Emerging evidence highlights the critical involvement of central neurochemical regulation in fatigue development, particularly through neurotransmitter-mediated modulation. Alterations in neurotransmitter release and receptor activity could influence excitatory and inhibitory signal pathways, thus modulating the perception of fatigue and exercise performance. Increased serotonin (5-HT) could increase perception of effort and lethargy, reduce motor drive to continue exercising, and contribute to exercise fatigue. Decreased dopamine (DA) and noradrenaline (NE) neurotransmission can negatively impact arousal, mood, motivation, and reward mechanisms and impair exercise performance. Furthermore, the serotonergic and dopaminergic systems interact with each other; a low 5-HT/DA ratio enhances motor motivation and improves performance, and a high 5-HT/DA ratio heightens fatigue perception and leads to decreased performance. The expression and activity of neurotransmitter receptors would be changed during prolonged exercise to fatigue, affecting the transmission of nerve signals. Prolonged high-intensity exercise causes excess 5-HT to overflow from the synaptic cleft to the axonal initial segment and activates the 5-HT1A receptor, thereby inhibiting the action potential of motor neurons and affecting the recruitment of motor units. During exercise to fatigue, the DA secretion is decreased, which blocks the binding of DA to D1 receptor in the caudate putamen and inhibits the activation of the direct pathway of the basal ganglia to suppress movement, meanwhile the binding of DA to D2 receptor is restrained in the caudate putamen, which activates the indirect pathway of the basal ganglia to influence motivation. Furthermore, other neurotransmitters and their receptors, such as adenosine (ADO), glutamic acid (Glu), and γ‑aminobutyric acid (GABA) also play important roles in regulating neurotransmitter balance and fatigue. The occurrence of central fatigue is not the result of the action of a single neurotransmitter system, but a comprehensive manifestation of the interaction between multiple neurotransmitters. This review explores the important role of neurotransmitters and their receptors in central motor fatigue, reveals the dynamic changes of different neurotransmitters such as 5-HT, DA, NE, and ADO during exercise, and summarizes the mechanisms by which these neurotransmitters and their receptors regulate fatigue perception and exercise performance through complex interactions. Besides, this study presents pharmacological evidence that drugs such as agonists, antagonists, and reuptake inhibitors could affect exercise performance by regulating the metabolic changes of neurotransmitters. Recently, emerging interventions such as dietary bioactive components intake and transcranial electrical stimulation may provide new ideas and strategies for the prevention and alleviation of exercise fatigue by regulating neurotransmitter levels and receptor activity. Overall, this work offers new theoretical insights into the understanding of exercise central fatigue, and future research should further investigate the relationship between neurotransmitters and their receptors and exercise fatigue.

Objective:Anterior cruciate ligament injury is the most common type of knee joint ligament injury.Anterior cruciate ligament reconstruction has a high failure rate,with bone tunnel abnormalities as the most significant factor in these failures.Digital orthopedic technology can effectively develop implementation plans for the revision,thus increasing the success rate.This study aims to develop a surgical plan for anterior cruciate ligament revision by employing multiplanar reconstruction(MPR)for measuring bone tunnel position and diameter,and simulating bone tunnel creation via 3D printing preoperatively. Methods:A total of 12 patients who underwent anterior cruciate ligament revision at the Third Xiangya Hospital of Central South University between 2014 and 2021 were retrospectively studied.The data included patient demographics,preoperative formulated knee joint 3D printing models,and preoperative knee CT scans.The study measured the bone tunnel's diameter and position to guide the establishment of revision bone tunnels during surgery,reassessed the postoperative bone tunnels,and evaluated knee joint functional scores[including International Knee Documentation Committee Knee Evaluation Form(IKDC)score,Lysholm score,and Tegner exercise level score]. Results:Preoperative measurements revealed suboptimal femoral tunnels positions in 4 patients and tibial tunnels positions in 2 patients.MPR and 3D printing technology were used to guide the establishment of a new bone canal during surgery,and postoperative measurements were satisfactory for all patients.Preoperative measurements demonstrated the interclass correlation coefficient for femoral tunnels and tibial tunnels diameters were 0.843(P<0.05)and 0.889(P<0.001),respectively.Meanwhile,the intraclass correlation coefficient were 0.811(P<0.05)and 0.784(P<0.05),respectively.The intraoperative diameter of femoral and tibial tunnels showed excellent correlation with postoperative CT measurements,with intraclass correlation coefficient values of 0.995(P<0.001)and 0.987(P<0.001),respectively.All bone tunnel positions were within the normal range.At the final follow-up,knee joint function scores in all 12 patients improved significantly compared to pre-surgery(P<0.001),and the reoperation rate was zero. Conclusion:MPR and 3D printing technology can accurately measure the parameters of reconstructed anterior cruciate ligament bone tunnels.Personalized revision plans for patients with reconstruction failure enhances the success rate of revision surgery and improves patient prognosis.

Objective:To investigate the relationship between intramuscular adipose tissue index (IATI) calculated from computed tomography images at transverse process of the first lumbar and all-cause mortality in maintenance dialysis patients, and to provide a reference for improving the prognosis in these patients.Methods:It was a multicenter retrospective cohort study. The clinical data of patients who received maintenance hemodialysis or peritoneal dialysis treatment from January 1, 2017 to December 31, 2019 in 4 grade Ⅲ hospitals including Zhongda Hospital Affiliated to Southeast University, Taizhou People's Hospital Affiliated to Nanjing Medical University, Affiliated Hospital of Yangzhou University, and the Third Affiliated Hospital of Soochow University were retrospectively collected. IATI was calculated by low attenuation muscle (LAM) density/skeletal muscle density. The receiver-operating characteristic curve was used to determine the optimal cut-off value of IATI, and the patients were divided into high IATI group and low IATI group according to the optimal cut-off value. The differences of baseline clinical data and measurement parameters of the first lumbar level between the two groups were compared. The follow-up ended on December 23, 2022. The endpoint event was defined as all-cause mortality within 3 years. Kaplan-Meier survival curve and log-rank test were used to analyze the survival rates and the differences between the two groups. Multivariate Cox regression analysis models were used to analyze the association between IATI and the risk of all-cause mortality in maintenance dialysis patients. Multivariate logistic regression analysis model was used to analyze the influencing factors of high IATI.Results:A total of 478 patients were eligibly recruited in this study, with age of (53.55±13.19) years old and 319 (66.7%) males, including 365 (76.4%) hemodialysis patients and 113 (23.6%) peritoneal dialysis patients. There were 376 (78.7%) patients in low IATI (<0.42) group and 102 (21.3%) patients in high IATI (≥0.42) group. The proportion of age ≥ 60 years old ( χ2=24.746, P<0.001), proportion of diabetes mellitus ( χ2=5.570, P=0.018), fasting blood glucose ( t=-2.145, P=0.032), LAM density ( t=-3.735, P<0.001), LAM index ( t=-7.072, P<0.001), and LAM area/skeletal muscle area ratio ( Z=-9.630, P<0.001) in high IATI group were all higher than those in low IATI group, while proportion of males ( χ2=11.116, P<0.001), serum albumin ( Z=2.708, P=0.007) and skeletal muscle density ( t=12.380, P<0.001) were lower than those in low IATI group. Kaplan-Meier survival analysis showed that the 3-years overall survival rate of low IATI group was significantly higher than that in high IATI group (Log-rank χ2=19.188, P<0.001). Multivariate Cox regression analysis showed that IATI<0.42 [<0.42/≥0.42, HR(95% CI): 0.50 (0.31-0.83), P=0.007] was an independent protective factor of all-cause mortality, and age ≥60 years old [ HR (95% CI): 2.61 (1.60-4.23), P<0.001], diabetes mellitus [ HR (95% CI): 1.71 (1.06-2.78), P=0.029] and high blood neutrophil/lymphocyte ratio [ HR (95% CI): 1.04 (1.00-1.07), P=0.049] were the independent risk factors of all-cause mortality in maintenance dialysis patients. Stepwise Cox regression analysis showed that IATI<0.42 was still an independent protective factor of all-cause mortality in maintenance dialysis patients [<0.42/≥0.42, HR (95% CI): 0.45 (0.27-0.76), P=0.003]. Multivariate logistic regression analysis showed that low skeletal muscle density [ OR (95% CI): 0.84 (0.81-0.88), P<0.001] and high serum triglyceride [ OR (95% CI): 1.39 (1.07-1.82), P=0.015] were the independent influencing factors of IATI≥0.42. Conclusion:IATI<0.42 of the first lumbar level is an independent protective factor of all-cause mortality in maintenance dialysis patients. Localized myosteatosis within high-quality skeletal muscle may reduce the risk of all-cause mortality in these patients.

OBJECTIVE To establish HPLC methods with different separation principles to analyze the relevant impurities in the APIs of bivalirudin from seven enterprises, to provide a basis for the comprehensive control of related substances of bivalirudin. METHODS Reversed-phase high performance liquid chromatography(RP-HPLC) was used to separate and analyze 11 kinds of impurities. Hydrophilic chromatography(HILIC)-HPLC was used to control four process impurities. Polymers were determined by size exclusion chromatography(SEC)-HPLC. RESULTS The established RP-HPLC could effectively separate the principal component and 11 impurities, the correction factors of 11 impurities were between 0.8−1.2, the detection concentration of bivalirudin was 0.1 μg·mL−1, and the detection limit was 0.004%. The established HILIC-HPLC could effectively separate the principal components and four process impurities, and the detection concentration of bivalirudin was 0.3 μg·mL−1, and the detection limit was 0.01%. Under SEC-HPLC conditions, the polymer and bivalirudin peaked sequentially, the resolution of the two was 2.9, the detection concentration of bivalirudin was 6 ng·mL−1, and the detection limit was 0.000 6%. Fifteen kinds of known impurities and polymers in 15 batches of samples from 7 enterprises were calculated by the self-control method of principal components, and the impurity contents from different enterprises had a certain correlation with their production processes. CONCLUSION The three different principles of the method have good specificity, high sensitivity, good durability, and reliable results, and can be used for quality control of substances related to bivalirudin.

OBJECTIVE To establish a comprehensive platform for regional pharmaceutical care among Jiangxi provincial pediatric alliance to realize the management of pediatric hierarchical diagnosis and treatment, and improve the quality of pharmaceutical care. METHODS A unified diagnosis and treatment information standard and a knowledge base of children's rational drug use rules were established among the medical institutions of Jiangxi provincial pediatric alliance. On this basis, the medical records and drug use information of patients in various medical institutions in the region were uploaded to the chain in a structured manner in real time, and a comprehensive platform for regional pharmaceutical care was built. RESULTS The comprehensive platform for regional pharmaceutical care built based on blockchain technology could share medical resources and information among medical institutions, realize rational drug use management, remote prescription review, individualized drug use guidance, popular science education, government supervision, etc., and improve the quality of pharmaceutical care. CONCLUSION The comprehensive platform for regional pharmaceutical care among Jiangxi provincial pediatric alliance can help allocate high-quality medical resources (drug safety knowledge base and pediatric pharmacists) for primary medical institutions. Further more, it lays the foundation for government supervision at the same time ensuring children’s medication safety, which has great practical significance.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.

Developing and implementing biosafety standards for pathogenic microbiology laboratories is essential to achieving scientific, efficient, and standardized management and operation. This article analyzes the current standardization construction in biosafety in pathogenic microbiology laboratories domestically and internationally. It proposes a framework for the biosafety standard system of pathogenic microbiology laboratories, which mainly includes four parts: basic standards, management standards, technical standards, and industry applications. It provides a reference for the standardization work of pathogenic microbiology laboratories and helps to standardize the biosafety industry in China.

The breakage pattern of unit particles during the production of oral solid dosage forms (OSD) is closely related to the quality of intermediate or final products. To accurately characterize the particles and study the evolution law of particle breakage, the Bonding model of the discrete element method (DEM) was used to investigate the breakage patterns of model parameters, particle shape and process conditions (loading mode and loading rate) on the dynamic breakage, force-time curve, breakage rate, maximum breakage size ratio and fracture strength of particles. The results showed that the particle breakage force was positively correlated with normal strength and bonded disk scale, negatively correlated with normal stiffness per unit area and tangential stiffness per unit area, and weakly correlated with tangential strength. The particle breakage rate was negatively correlated with the aspect ratio of the particles, and the maximum breakage size ratio was positively correlated with the aspect ratio of the particles; among the three loading modes, the breakage rate of compression breakage model was the largest, the breakage rate of shear breakage model was the second largest, and the breakage rate of wear breakage model was the smallest; the maximum breakage size ratio was positively correlated with the loading rate, the loading mode and the loading rate had no mutual influence on particle breakage rate, but had mutual influence on the maximum breakage size ratio. The research results will provide a theoretical basis for the shift of OSD from batch manufacturing to advanced manufacturing.

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.