Ocular accommodation refers to the process by which the ciliary muscle creates a clear image of the object in the retina by changing the refractive power of the lens. When the accommodation ability of the eye is insufficient, the imaging focus falls on the region behind the retina and hyperopic defocus is easily formed, resulting in axial growth and leading to the development of myopia, and it is found that most myopic patients usually have some accommodation dysfunction. Myopia has become a public health problem in China, and the prevalence of adolescents has increased dramatically. How to prevent and stop the occurrence and development of myopia is a major challenge. Previous studies have found that ocular accommodation dysfunction is associated with the occurrence and development of myopia, and the measurement of parameters related to accommodation function has certain guiding significance for the prevention and control of myopia. The purpose of this paper is to review the correlation between myopia and ocular accommodation function, with a view to providing new ideas for the prevention, control and treatment of myopia.

Objective To investigate the efficacy of flupentixol combined with ondansetron in preventing postoperative nausea and vomiting(PONV)in patients receiving sufentanil and dezocine patient-controlled intravenous analgesia(PCIA).Methods Surgical patients receiving sufentanil and dezocine PCIA were randomly divided into treatment and control groups using a random number table.The control group received sufentanil 150 μg,dezocine 20 mg,and ondansetron 8 mg for PCIA,while the treatment group received sufentanil 150 μg,dezocine 20 mg,flupentixol 5 mg,and ondansetron 8 mg for PCIA.The incidence of PONV,severity of PONV,heart rate(HR),mean arterial pressure(MAP),blood oxygen saturation(SPO2)levels at different time points after surgery,surgery-related indicators,visual analogue scale(VAS)scores,Ramsay scores,PCIA pressing times,and incidence of adverse drug reactions were compared between the two groups.Results The incidence of PONV in the treatment group and the control group at 2,12,24,36 and 48 hours after surgery were 1.64％,4.84％,6.56％,3.28％,0 and 14.75％,18.03％,19.67％,16.39％,9.84％,respectively.The HR at 24 hours after surgery in the treatment group and the control group were(91.42±8.75)and(98.13±9.62)beat·min-1,respectively;the MAP were(91.98±4.56)and(99.05±4.17)mmHg;SPO2 were(98.13±1.65)％and(98.95±1.82)％;VAS scores were 2.68±0.49 and 2.97±0.63;Ramsay scores were 2.27±0.65 and 2.05±0.32;PCIA pressing times were(2.14±0.37)and(4.36±0.78)times,respectively.The differences in the above indicators between the treatment group and the control group were statistically significant(all P＜0.05).The incidence of total adverse drug reactions after surgery in the treatment group and the control group were 13.12％and 8.20％,respectively,with no statistically significant difference(P＞0.05).Conclusion Flupentixol combined with ondansetron can reduce the risk of PONV caused by sufentanil combined with dezocine PCIA after surgery,ensuring good analgesic effects and safety.

With the increasing life expectancy and lifestyle changes of patients with chronic hepatitis B (CHB), the significance of comorbidities of chronic non-communicable diseases (NCDs) in disease progression and health prognosis of CHB patients is gaining prominence. This study aims to explore the association between CHB and NCDs comorbidities, focusing on the impact of common metabolism-related diseases, such as metabolic syndrome and diabetes, on the health outcomes of CHB patients. We also summarize studies on integrating the management of comorbidities in CHB patients and provide relevant recommendations for effective management. The findings of this study serve as a foundation for understanding the clinical characteristics and prevalence trends, reducing the disease burden of comorbidities among CHB patients, and establishing a comprehensive and coordinated management system for comorbidities.

Plant natural products have a wide range of pharmacological properties, not only can they be used as plant dietary supplements to meet the nutritional needs of the human body in the accelerated pace of life, but also occupy an important position in the research and development of therapeutic drugs for the treatment of tumors, inflammation and other diseases, and have been widely accepted by the public due to their good safety. However, despite the above advantages of plant natural products, limiting factors such as low solubility, poor stability, lack of targeting, high toxicity and side effects, and unacceptable odor have greatly impeded their conversion to clinical applications. Therefore, the development of new avenues for the application of new natural products has become an urgent problem to be solved at present. In recent years, with the continuous development of research, various strategies have been developed to improve the bioavailability of natural products. Among them, nanocarrier delivery system is one of the most attractive strategies at present. In past studies, a large number of nanomaterials (organic, inorganic, etc.) have been developed to encapsulate plant-derived natural products for their efficient delivery to specific organs and cells. Up to now, nanotechnology has not only been limited to pharmaceutical applications, but is also competing in the fields of nanofood processing technology and nanoemulsions. Among the various nanocarriers, liposomes are the largest nanocarriers with the largest market share at present. Liposomes are bilayer nanovesicles synthesized from amphiphilic substances, which have advantages such as high drug loading capacity and stability. Attractively, the flexible surface of liposomes can be modified with various functional elements. Functionalized modification of liposomes with different functional elements such as antibodies, nucleic acids, peptides, and stimuli-responsive moieties can bring out the excellent drug delivery function of liposomes to a greater extent. For example, the modification of functional elements with targeting function such as nucleic acids and antibodies on the surface of liposomes can deliver natural products to the target location and improve the bioavailability of drugs; the modification of stimulus-responsive groups such as photosensitizers, magnetic nanoparticles, pH-responsive groups, and temperature sensitizers on the surface of liposomes can achieve controlled release of drugs, localized targeting, and synergistic thermotherapy. In addition to the above properties, by using functionalized liposomes to encapsulate natural products with irritating properties can also effectively mask the irritating properties of natural products, improve public acceptance, and increase the possibility of application of irritating natural products. There are various strategies for modifying liposomes with functional elements, and the properties of functionalized liposomes constructed by different construction strategies differ. The commonly used construction strategies for functionalized liposomes include covalent modification and non-covalent modification. These two types of construction strategies have their own advantages and disadvantages. Covalent modification has better stability than non-covalent modification, but its operation is cumbersome. With the above background, this review focuses on the three typical problems faced by plant natural products at present, and summarizes the specific applications of functionalized liposomes in them. In addition, this paper summarizes the construction strategies for building different types of functionalized liposomes. Finally, this paper will also review the opportunities and challenges faced by functionalized liposomes to enter clinical therapy, and explore the opportunities to overcome these problems, with a view to better realizing the precise control of plant nanomedicines, and providing ideas and inspirations for researchers in related fields as well as relevant industrial staff.

The traditional commodity specifications of Chinese medicinal materials are mainly divided into different grades based on macroscopic characteristics. As the basis for high quality and good price, there is still a lack of systematic evaluation on whether they are consistent with the current standards and whether they can reflect the internal quality of medicinal material. Panax notoginseng is a commonly used, large consumption of Chinese medicinal material. At present, it is divided into 8 grades in the market based on "Tou" (the number of crude drug /500 g), but it is not related to the standard of total saponins of Panax notoginseng (the sum of three saponins) in Chinese Pharmacopoeia. In this study, ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry (UPLC-Q-TOF-MS/MS) coupled with mass spectrometry molecular network were used for the rapid identification of saponins of Panax notoginseng with different "Tou" and a total of 64 saponins were identified. Seventeen saponins related to "Tou" were screened by orthogonal partial least squares discriminant analysis (OPLS-DA). The content of five saponins R₁, Rb₁, Rg₁, Rd, and Re in Panax notoginseng with different "Tou" was determined by high performance liquid chromatography (HPLC). The results of correlation analysis showed that Rd and R₁ with the largest VIP values among the differential saponins, which significantly negatively correlated with "Tou" (P < 0.05). Based on the determination results of 36 batches of samples, using Rd/Total Panax notoginseng saponins (TPNS) ratio ( > 0.08) as the index, Panax notoginseng can be divided into two grades: 20-60 "Tou" (superior) and 80-200 "Tou" (qualified). Based on the concept of "macroscopic characteristics and chemical profiling", this study integrates the non-targeted analysis and quantitative determination methods to provide a new strategy for quality evaluation of Panax notoginseng.

In order to study the compounds from Glechoma longituba (Nakai) Kupr. and explore the substance bases of its dissipating blood stasis, MCI, silica gel, Sephadex LH-20, ODS column chromatography and preparative thin layer chromatography were used to isolate and purify the compounds. The structures were identified by MS, 1D NMR, and 2D NMR spectra analysis, etc. Eight triterpenoids were isolated from dichloromethane fraction of ethanol extract from G. longituba and identified as 2α,3α,16β-trihydroxy-13α,27-cyclours-11-en-28-oic acid (1), 28-norurs-12-ene-3β,17β-diol (2), 28-norolean-12-ene-3β,17β-diol (3), oleanonic acid (4), 3β,13β-dihydroxyurs-11-en-28-oic acid (5), uvaol (6), oleanolic acid (7), ursolic acid (8). Compound 1 is a new hexacyclic triterpene with 13α,27-cyclopropane structure, named euscaphic acid H; compounds 2 and 3 were isolated from Lamiaceae for the first time while compounds 4 and 5 were isolated from this genus. The in vitro anticoagulant activity of triterpenoids was evaluated by four coagulation indexes (activated partial thromboplastin time, APTT; thrombin time, TT; prothrombin time, PT; fibrinogen, FIB). Among them, compounds 1 and 6 showed obvious anticoagulant effects.

Phellodendri Chinensis Cortex (PCC) featured with thick cortex and bright-yellow is considered to be of high quality according to traditional appearance traits evaluation mode. However, the correlation between appearance traits and internal quality of PCC has not been scientifically revealed. Here, based on the theory of "Quality Evaluation Through Morphological Identification", the correlation of both sides was studied systematically. Firstly, the thickness of PCC slices was measured by vernier calipers for classification, and the colour of PCC slice was estimated by naked eyes and automatic colorimeter and classified. Secondly, high performance liquid chromatography (HPLC) was used to establish fingerprint chromatogram containing 12 characteristic peaks, and the contents of moisture and ethanolic extractive were determined as well. The correlation among the appearance traits of PCC slice (including the thickness and the spatial values of colour of PCC slice powder: L*Lightness, a*Red-Green, b*Yellow-Blue) and peak areas of 12 characteristic peaks, contents of moisture and extractive were explored through multivariate statistical analysis tools, including Pearson's correlation analysis, principal component analysis (PCA), orthogonal partial least squares-discriminant analysis (PLS-DA) and analysis of variance (ANOVA). Association analysis results showed the morphological parameters (thickness and color) are significantly correlated with 2 kinds of principle chemical constituents (alkaloids and phenolic acids), among them, 5 major constituents including 2 isoquinoline alkaloids and 3 feruloylquinic acids were simultaneously quantitatively analyzed under the same chromatographic condition for establishing a correspondence between appearance traits and content of internal substances, and the sum of the contents of the five components was significantly higher in the thickness ≥ 4 mm (13.15% ± 2.25%) and bright yellow samples (12.14% ± 2.00%) than that in the thickness < 4 mm (10.89% ± 1.41%) and dark yellow samples (10.32% ± 2.41%). The research results confirm that thickness and colour, two main appearance parameters of PCC slice, can be used as the indicators for evaluating the quality PCC slice, which to some extent interprets the scientific connotation of traditional evaluation theory of "thick and yellow are better". At the same time, the results provided substantial data and foundation for the establishment of commodity grade standards of PCC slice.

The present situation of finite element methods was reviewed when applied in investigating the influences of structural type and structural parameters on mechanical properties of vascular stents,the differences in fatigue performance of vascular stents made of different materials and the interactions of vascular stents,blood vessels and blood.The shortcomings of finite element methods were analyzed,and improvement of simulation accuracy and optimization of vessel and vascular stent setup were suggested to be focused on when performing finite element analysis of vascular stents.[Chinese Medical Equipment Journal,2024,45(10):107-113]

Osteoporosis is an important cause of internal fixation loosening after spinal surgery.Cement-augmented pedicle screw instru-mentation(CAPSI)technique is the most widely used technique in clinical practice to improve the stability of pedicle screw,mainly applied in osteoporosis and revision surgery,which included conventional solid pedicles crews and fenestrated/cannulated pedicle screws technique.CAPSI technique may cause cement leakage and pulmonary embolism,and there is no consensus on its indications or technical points.Therefore,this article reviews the research progress of CAPSI,in order to provide relevant reference for clinical practice.

Objective To explore the efficiency of artificial intelligence and radiomics-assisted X-ray in diagnosis of lumbar osteoporotic vertebral compression fractures(OVCF).Methods The clinical data of 455 patients diagnosed as lumbar OVCF by MRI in our hospital were selected.The patients were divided into the training group(n=364)and the validation group(n=91),X-ray films were extracted,the image delineation,feature extraction and data analysis were carried out,and the artificial intelligence radiomics deep learning was applied to establish a diagnostic model for OVCF.After verifying the effectiveness of the model by receiver operating characteristic(ROC)curve,area under the curve(AUC),calibration curve,and decision curve analysis(DCA),the efficiencies of manual reading,model reading,and model-assisted manual reading of X-ray in the early diagnosis of OVCF were compared.Results The ROC curve,AUC and calibration curve proved that the model had good discrimination and calibration,and excellent diagnostic performance.DCA demonstrated that the model had a higher clinical net benefit.The diagnostic efficiency of the manual reading group:the accuracy rate was 0.89,the recall rate was 0.62.The diagnostic efficiency of the model reading group:the accuracy rate was 0.93,the recall rate was 0.86,the model diagnosis showed good predictive performance,which was significantly better than the manual reading group.The diagnostic efficiency of the model-assisted manual reading group:the accuracy rate was 0.92,the recall rate was 0.72,and the recall rate of the model-assisted manual reading group was higher than that of the manual reading group,but lower than that of the model reading group,indicating the superiority of the model diagnosis.Conclusion The diagnostic model established based on artificial intelligence and radiomics in this study has reached an ideal level of efficacy,with better diagnostic efficacy compared with manual reading,and can be used to assist X-ray in the early diagnosis of OVCF.