Projection micro stereolithography three-dimensional(3D)printing method was proposed in this study to fabricate complex microchannels of combined cross-sections.By using 3D printing and polydimethylsiloxane(PDMS)replication methods,two inertial microfluidic chips of three-step and five-step cross-sections were fabricated,and the dimension precisions of the microchannels were controlled within 20 μm.Using the microfluidic chips,the movements of two fluorescent polystyrene particles with diameters of 10 and 6 μm in the stepped channels were investigated.In addition,numerical simulations were applied to demonstrate the inertial focusing mechanisms of particles in the channels.It was found that 10-μm particles had three equilibrium positions in the three-step channel,which located at the inner walls of the three steps,respectively,and most particles focused at the inner step.The 6-μm particles also had three equilibrium positions in the three-step channel.However,the particles migrated to the middle and the outer steps under high flow rates.In the five-step channel,when the flow rate was increased gradually,10-μm particles had a single and two equilibrium positions,respectively,and the particles migrated towards the inner channel wall under high flow rates.In comparison to 10-μm particles,6-μm particles had two stable equilibrium positions in the five-step channel at all flow rate range.It could be concluded that the quantity,shape and strength of the secondary flow vortex could be altered by changing structure of the combined cross-section,thus the equilibrium positions and quantities of the focusing particles could be also regulated.The research outcome might provide new insights for precise cell inertial manipulation and promote the application and development of inertial microfluidic technology in biomedical and other fields.

Objective:To measure and compare the difference of personal attenuation rating (PAR) of the workers wearing foam earplugs before and after the training, and to evaluate the effect of ear protector wearing training on the noise protection.Methods:In February 2023, 94 workers exposed to noise in a machinery manufacturing factory were selected as subjects. The production noise in the workplace was measured and subjects were trained to wear earplugs. The PAR values of wearing 3M 1110 foam test earplugs were measured and recorded before and after the training by using the fit testing of hearing protection device. The differences between the actual PAR values with nominal values and the noise attenuation values in related standards were compared, and the protective effect of hearing protection device before and after training was evaluated.Results:The average age of the subjects was (36.76±11.48) years old, the average length of service was (16.34±11.64) years, and the average exposure time to noise was (15.67±11.64) years. The noise detection results of the subjects' posts were ranged from 80.1 to 94.3 dB (A). The results of subjects wore 3M 1110 foam test earplugs for fit testing showed that the binaural PAR value after training was (19.3±6.4) dB (A), which was significantly higher than that before training (11.1±7.4) dB (A) ( t=13.31, P<0.001). After training, 11 people (11.70%) could reach the corrected noise reduction value (NRR value), 26 people (27.66%) could reach the standard of single noise reduction value (SNR value) ×0.6, and 84 people (89.36%) could reach the standard of (NRR-7) /2. The under protection rate of hearing protectors after training (7.45%) was significantly lower than that before training (45.74%), and the difference of different protection levels before and after training was statistically significant (χ 2=40.83, P<0.001) . Conclusion:It is suggested that enterprises should use the fit testing instead of nominal value estimation to evaluate the noise reduction effect of hearing protection device. Special training on the selection and use of hearing protection device should be strengthened, so as to ensure that workers wear them correctly and improve the protective effect of hearing protection device.

Objective To explore the effectiveness and safety of percutaneous coronary artery shock wave balloon angioplasty(IVL)under the guidance of intravascular ultrasound(IVUS)for the treatment of severe calcification lesions in the left main artery(LM).Methods A total of 26 patients with severe LM(mouth,body,bifurcation)calcification admitted to Jiangnan University Affiliated Hospital from October 2022 to April 2024 were included,with an average age of 72.0(61.8,75.4)years.Under the guidance of IVUS,IVL was used for pre-treatment of calcified lesions,followed by percutaneous coronary intervention(PCI)with stent/drug balloon implantation.All patients were evaluated using IVUS before and after the use of IVL and after PCI.And compare the IVUS intracavity related data before and after treatment[plaque burden(PB)、minimum lumen area(MLA)、minimum lumen diameter(MLD)]and calcification fracture number,minimum stent area(MSA),stent expansion coefficient(expansion,EXP),etc.Results There were 26 patients(2 with opening lesions,7 with body lesions,and 17 with bifurcation lesions at the end of the main trunk),including 7 with stable angina pectoris(SAP),10 with unstable angina(UA),4 with acute ST-segment elevation myocardial infarction(STEMI),and 5 with non ST-segment elevation myocardial infarction(NSTEMI).The PB at the most severe site of calcification decreased by 79.50(76.00,83.75)％compared to 80.00(76.00,83.75)％after IVL(P=0.001),MLA increased by 3.39(3.14,3.68)mm2 compared to 3.38(3.14,3.67)mm2 after IVL(P=0.039),MLD increased by 3.21(3.07,3.30)mm compared to 3.20(3.07,3.30)mm after IVL(P=0.024),and there was 100％calcification rupture(1/2 cases,2/9 cases,≥3/15 cases).The stent/drug ball was successfully implanted 100％,with EXP of(89.15±4.42)％and an MSA of 7.20(6.46,7.45)mm2.No adverse events such as death,angina or recurrent myocardial infarction occurred during the 3 months follow-up after surgery.Conclusions After evaluation by IVUS and pre-treatment with IVL,PCI was successfully completed for severe calcification lesions in LM,and IVL can be used as an option for the treatment of severe calcification in LM.

Objective:To measure and compare the difference of personal attenuation rating (PAR) of the workers wearing foam earplugs before and after the training, and to evaluate the effect of ear protector wearing training on the noise protection.Methods:In February 2023, 94 workers exposed to noise in a machinery manufacturing factory were selected as subjects. The production noise in the workplace was measured and subjects were trained to wear earplugs. The PAR values of wearing 3M 1110 foam test earplugs were measured and recorded before and after the training by using the fit testing of hearing protection device. The differences between the actual PAR values with nominal values and the noise attenuation values in related standards were compared, and the protective effect of hearing protection device before and after training was evaluated.Results:The average age of the subjects was (36.76±11.48) years old, the average length of service was (16.34±11.64) years, and the average exposure time to noise was (15.67±11.64) years. The noise detection results of the subjects' posts were ranged from 80.1 to 94.3 dB (A). The results of subjects wore 3M 1110 foam test earplugs for fit testing showed that the binaural PAR value after training was (19.3±6.4) dB (A), which was significantly higher than that before training (11.1±7.4) dB (A) ( t=13.31, P<0.001). After training, 11 people (11.70%) could reach the corrected noise reduction value (NRR value), 26 people (27.66%) could reach the standard of single noise reduction value (SNR value) ×0.6, and 84 people (89.36%) could reach the standard of (NRR-7) /2. The under protection rate of hearing protectors after training (7.45%) was significantly lower than that before training (45.74%), and the difference of different protection levels before and after training was statistically significant (χ 2=40.83, P<0.001) . Conclusion:It is suggested that enterprises should use the fit testing instead of nominal value estimation to evaluate the noise reduction effect of hearing protection device. Special training on the selection and use of hearing protection device should be strengthened, so as to ensure that workers wear them correctly and improve the protective effect of hearing protection device.

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

OBJECTIVE To investigate the inhibitory effect and the possible mechanism of hydrogen sulfide （H2S） on the proliferation of cardiac fibroblasts. METHODS The heart of neonatal SD rats was collected， and cardiac fibroblasts were separated with differential centrifugation. Using sodium hydrosulfide as the donor of H2S， the effects of H2S on the proliferation of cardiac fibroblasts induced by angiotensin Ⅱ （Ang Ⅱ）， hydroxyproline content and the expression of sirtuin 3 （SIRT3） protein were detected. After SIRT3 knockdown with siRNA technology， the effects of H2S on the proliferation of cardiac fibroblasts induced by Ang Ⅱ， hydroxyproline content， the expressions of collagen Ⅰ （Col Ⅰ）， collagen Ⅲ （Col Ⅲ ） and optic atrophy protein 1 （OPA1） were detected. RESULTS H2S could inhibit the proliferation of Ang Ⅱ-induced cardiac fibroblasts， reduce the content of hydroxyproline and increase the expression of SIRT3 （P＜0.05）. After down-regulating the expression of SIRT3 with siRNA technology， the inhibition of H2S on the proliferation of Ang Ⅱ-induced cardiac fibroblasts and the reduction of hydroxyproline content were both inhibited， and the effect of H2S on reducing the expression of Col Ⅰ and Col Ⅲ and enhancing the expression of OPA1 was also significantly weakened. CONCLUSIONS H2S inhibits the proliferation of Ang Ⅱ -induced cardiac fibroblasts through increasing the expression of SIRT3.

Objective: To investigate the three-dimensional force in the maxillary dentition under different movement designs for molar distalization with clear aligners Methods: Three groups were designed: simultaneous movement group (simultaneous distalization of maxillary first and second molars), second molar movement group (distalization of maxillary second molars) and first molar movement group (distalization of maxillary first molars). Ten clear aligners were made in each group, and the displacement was designed to be 0.2 mm. A force sensing device was established to measure the three-dimensional force on the upper dentition with the clear aligner. The device contained a model of the maxillary dentition consisting of 14 teeth, each tooth connected to an individual sensor. After the clear aligner was fitted, the data of 14 sensors were collected and analyzed using computer analysis software. The moving teeth were taken as the target teeth, and the rest of the teeth were anchorage. The data of the three-dimensional force in the three groups in each tooth position were measured and compared. Results: The sagittal forces on the first and second molars in the simultaneous movement group were (5.61±0.94) and (5.81±1.08) N, respectively, which were significantly smaller than those of the target teeth in the same position in other groups (P<0.05). The second molars in the first molar movement group received a sagittal reaction force, which was (-6.73±1.99) N. The anterior teeth in the three groups were all subjected to sagittal reaction force, and the force value was in a range of (-3.33 to 0.46) N. In the coronal direction, the second premolars of the simultaneous movement group received the reaction force in the palatal direction, and the force value was (-2.17±1.06) N. The first molars in the second molar movement group were also subjected to palatal reaction force of (-1.99±0.70) N. The second molars and second premolars in the first molar movement group were also subjected to palatal reaction force, which were (-2.85±0.57) and (-1.85±0.74) N, respectively. Compared with the sagittal and coronal forces, the target teeth and anchorage teeth in the three groups were less stressed in the vertical direction. Conclusions: The first and second molars distalized simultaneously, the correction force in the sagittal direction was relatively small. When first molar was moved distally alone, a greater reaction force in the sagittal direction was exerted on the second molar. Buccal displacement of the adjacent anchorage teeth should be designed to counteract the palatal reaction force on the anchorage teeth as the molars moved distally.

Objective: This cross-sectional investigation aimed to determine the incidence, clinical characteristics, prognosis, and related risk factors of olfactory and gustatory dysfunctions related to infection with the SARS-CoV-2 Omicron strain in mainland China. Methods: Data of patients with SARS-CoV-2 from December 28, 2022, to February 21, 2023, were collected through online and offline questionnaires from 45 tertiary hospitals and one center for disease control and prevention in mainland China. The questionnaire included demographic information, previous health history, smoking and alcohol drinking, SARS-CoV-2 vaccination, olfactory and gustatory function before and after infection, other symptoms after infection, as well as the duration and improvement of olfactory and gustatory dysfunction. The self-reported olfactory and gustatory functions of patients were evaluated using the Olfactory VAS scale and Gustatory VAS scale. Results: A total of 35 566 valid questionnaires were obtained, revealing a high incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain (67.75%). Females(χ2=367.013, P<0.001) and young people(χ2=120.210, P<0.001) were more likely to develop these dysfunctions. Gender(OR=1.564, 95%CI: 1.487-1.645), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), oral health status (OR=0.881, 95%CI: 0.839-0.926), smoking history (OR=1.152, 95%CI=1.080-1.229), and drinking history (OR=0.854, 95%CI: 0.785-0.928) were correlated with the occurrence of olfactory and taste dysfunctions related to SARS-CoV-2(above P<0.001). 44.62% (4 391/9 840) of the patients who had not recovered their sense of smell and taste also suffered from nasal congestion, runny nose, and 32.62% (3 210/9 840) suffered from dry mouth and sore throat. The improvement of olfactory and taste functions was correlated with the persistence of accompanying symptoms(χ2=10.873, P=0.001). The average score of olfactory and taste VAS scale was 8.41 and 8.51 respectively before SARS-CoV-2 infection, but decreased to3.69 and 4.29 respectively after SARS-CoV-2 infection, and recovered to 5.83and 6.55 respectively at the time of the survey. The median duration of olfactory and gustatory dysfunctions was 15 days and 12 days, respectively, with 0.5% (121/24 096) of patients experiencing these dysfunctions for more than 28 days. The overall self-reported improvement rate of smell and taste dysfunctions was 59.16% (14 256/24 096). Gender(OR=0.893, 95%CI: 0.839-0.951), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), history of head and facial trauma(OR=1.180, 95%CI: 1.036-1.344, P=0.013), nose (OR=1.104, 95%CI: 1.042-1.171, P=0.001) and oral (OR=1.162, 95%CI: 1.096-1.233) health status, smoking history(OR=0.765, 95%CI: 0.709-0.825), and the persistence of accompanying symptoms (OR=0.359, 95%CI: 0.332-0.388) were correlated with the recovery of olfactory and taste dysfunctions related to SARS-CoV-2 (above P<0.001 except for the indicated values). Conclusion: The incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain is high in mainland China, with females and young people more likely to develop these dysfunctions. Active and effective intervention measures may be required for cases that persist for a long time. The recovery of olfactory and taste functions is influenced by several factors, including gender, SARS-CoV-2 vaccination status, history of head and facial trauma, nasal and oral health status, smoking history, and persistence of accompanying symptoms.
Female ; Humans ; Adolescent ; SARS-CoV-2 ; Smell ; COVID-19/complications* ; Cross-Sectional Studies ; COVID-19 Vaccines ; Incidence ; Olfaction Disorders/etiology* ; Taste Disorders/etiology* ; Prognosis

Objective:To investigate the combination of internal fixation for periprosthetic fractures of the proximal femur (PFFF) after hip arthroplasty.Methods:The data of 58 patients with periprosthetic fractures after hip arthroplasty from May 2008 to March 2022 were retrospectively analyzed, including 31 males and 27 females. The average age was 75.5±18.2 years (range, 35-95 years). There were 39 total hip arthroplasty and 19 hemiarthroplasty; 37 biological prosthesis and 21 cemented prosthesis. Intraoperative periprosthetic fractures occurred in 6 cases and 52 cases postoperatively. Unified classification system (UCS): UCS IV.3A1 type 2 cases, 3A2 type 1 case, 3B1.1 type 19 cases, 3B2.1 type 25 cases, 3B3 type 2 cases, 3C type 9 cases. Fracture site: 3 cases in zone A (greater trochanter), 46 cases in zone B (around the femoral stem), and 9 cases in zone C (distal to the tip of the femoral stem. Internal fixation is composed of primary and secondary fixation, the main fixation method was the cerclage of steel wire or titanium cable, locking compression plate, and locking attachment plate fixation. The secondary fixation method was the cerclage of titanium cable, which was required to cover three zones A, B and C to form an overall balanced fixation. The modified Harris hip scores (mHHS), plate length, working length and screw number of different internal fixation combinations were compared.Results:The follow-up time was 54.2±21.6 months (range, 11-86 months). All patients showed signs of fracture healing at 10.2±1.5 weeks (range, 7-13 weeks) after operation, and bony union was observed at 19.6±1.3 weeks (range, 17-22 weeks) after operation. No delayed union or nonunion was observed. After operation, one case had a stress fracture and was revised with double-plate internal fixation; one case had a failed internal fixation and was revised with double-plate internal fixation and a large allograft bone graft. The mHHS score of UCSIV.3B2.1 group (80.3±4.6) was the lowest at 6 months after operation, and the difference between the groups of different types was statistically significant ( F=256.72, P<0.001). The score of simple internal fixation group (91.6±4.2) was higher than that of revision combined with internal fixation group (81.9±4.1), and the difference was statistically significant ( t=8.32, P<0.001). The plate length and working length were 24.9±2.5 cm and 12.6±1.7 cm for UCS IV.3B1.1, 25.4±2.6 cm and 13.6±1.8 cm for 3B2.1 and 28.1±2.5 cm and 4.9±1.9 cm for 3C, respectively ( F=5.33, P=0.005; F=6.78, P<0.001). The number of screws in zone A was significant difference among different UCS types ( F=52.67, P<0.001); UCS IV.3B1.1 (6.5±2.3) and 3B2.1 (6.7±2.2) were more than 3B3 (3.5±1.5) and 3C (3.7±1.6). The number of screws in zone B was significant difference among different UCS types ( F=42.15, P<0.001); The number of UCS IV.3B1.1 (2.3±1.6) and 3B2.1 (2.8±1.9) were significantly more than that of 3B3 (1.0±0.5) and 3C (1.2±0.6). The number of screws in zone C was significant differences among different UCS types ( F=39.62, P<0.001); The number of UCS IV.3B1.1 (3.8±1.9) and 3B2.1 (3.9±1.7) were more than that of 3B3 (2.0±0.5), the difference was statistically significant ( P<0.05). Conclusion:The function of hip after simple internal fixation of proximal femoral periprosthetic fractures was better than that of those who underwent revision at the same time; the number of screws of UCSIV.B1 and B2 is more than that of B3.

Humans ; Ankle ; Ankle Joint/surgery* ; Arthritis ; Arthrodesis ; Lower Extremity ; Hemophilia A/complications*