ObjectiveTo investigate the value of different noninvasive diagnostic models in the diagnosis of esophageal and gastric varices since there is a high risk of esophageal and gastric varices in patients with compensated hepatitis B cirrhosis and significant portal hypertension， and to provide a basis for the early diagnosis of esophageal and gastric varices. MethodsA total of 108 patients with significant portal hypertension due to compensated hepatitis B cirrhosis who attended Guangdong Provincial Hospital of Traditional Chinese Medicine from November 2017 to November 2023 were enrolled， and according to the presence or absence of esophageal and gastric varices under gastroscopy， they were divided into esophageal and gastric varices group （GOV group） and non-esophageal and gastric varices group （NGOV group）. Related data were collected， including age， sex， imaging findings， and laboratory markers. The chi-square test was used for comparison of categorical data between groups； the least significant difference t-test was used for comparison of normally distributed continuous data between groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between groups. The receiver operating characteristic （ROC） curve was plotted to evaluate the diagnostic value of five scoring models， i.e.， fibrosis-4 （FIB-4）， LOK index， LPRI， aspartate aminotransferase-to-platelet ratio index （APRI）， and aspartate aminotransferase/alanine aminotransferase ratio （AAR）. The binary logistic regression method was used to establish a combined model， and the area under the ROC curve （AUC） was compared between the combined model and each scoring model used alone. The Delong test was used to compare the AUC value between any two noninvasive diagnostic models. ResultsThere were 55 patients in the GOV group and 53 patients in the NGOV group. Compared with the NGOV group， the GOV group had a significantly higher age （52.64±1.44 years vs 47.96±1.68 years， t=0.453， P<0.05） and significantly lower levels of alanine aminotransferase ［42.00 （24.00 — 17.00） U/L vs 82.00 （46.00 — 271.00） U/L， Z=-3.065， P<0.05］， aspartate aminotransferase ［44.00 （32.00 — 96.00） U/L vs 62.00 （42.50 — 154.50） U/L，Z=-2.351， P<0.05］， and platelet count ［100.00 （69.00 — 120.00）×10⁹/L vs 119.00 （108.50 — 140.50）×10⁹/L， Z=-3.667， P<0.05］. The ROC curve analysis showed that FIB-4， LOK index， LPRI， and AAR used alone had an accuracy of 0.667， 0.681， 0.730， and 0.639， respectively， in the diagnosis of esophageal and gastric varices （all P<0.05）， and the positive diagnostic rates of GOV were 69.97%， 65.28%， 67.33%， and 58.86%， respectively， with no significant differences in AUC values （all P>0.05）， while APRI used alone had no diagnostic value （P>0.05）. A combined model （LAF） was established based on the binary logistic regression analysis and had an AUC of 0.805 and a positive diagnostic rate of GOV of 75.80%， with a significantly higher AUC than FIB-4， LOK index， LPRI， and AAR used alone （Z=-2.773，-2.479，-2.206， and-2.672， all P<0.05）. ConclusionFIB-4， LOK index， LPRI， and AAR have a similar diagnostic value for esophageal and gastric varices in patients with compensated hepatitis B cirrhosis and significant portal hypertension， and APRI alone has no diagnostic value. The combined model LAF had the best diagnostic efficacy， which provides a certain reference for clinical promotion and application.

OBJECTIVE To study the improvement effects and potential mechanisms of water extract from Chrysanthemum morifolium on skeletal muscle atrophy in rats after ischemic stroke. METHODS Sprague-Dawley rats were randomly divided into sham operation group， model group， ATP group （10 mg/kg）， C. morifolium water extract high-dose and low-dose groups （1.08， 0.54 g/kg）. Except for sham operation group， ischemic stroke models were induced in rats from the other groups using middle cerebral artery occlusion. Starting from the first day after surgery， rats in each group were given corresponding drug/normal saline intragastrically， once a day， for consecutive 7 days. On the 7th day post-surgery， the rats’ body weights were measured， and their motor functions were evaluated， including Longa scores， exercise distance， grip strength； the electrophysiological signals of the skeletal muscles in rats were measured； the pathological morphology of the soleus muscle in rats was observed； the levels of tumor necrosis factor-α （TNF-α） in serum and soleus muscle were measured； the expressions of proteins related to TNF-α/c-Jun N- terminal kinase （JNK）/mitogen-activated protein kinase （MAPK） signaling pathway in the soleus muscle were determined. RESULTS Compared with sham operation group， the body weight， grip strength and exercise distance of rats were decreased/ shortened significantly （P＜0.01）； additionally， there was a notable reduction in the interpeak value of skeletal muscle electrophysiology （P＜0.05 or P＜0.01）. Longa score， as well as the levels of TNF-α in serum and soleus muscle， and the expression levels of TNF-α， phosphorylated JNK， phosphorylated MAPK， muscle ring-finger protein-1， and muscle atrophy Fbox- 1 protein in the soleus muscle， were all significantly elevated （P＜0.01）. The skeletal muscle cells of the soleus muscle in the model group showed significant atrophy， with a markedly decreased cross-sectional area （P＜0.01）. Compared with the model group， the levels of the aforementioned indicators were significantly reversed in C. morifolium water extract groups （P＜0.05 or P＜ 0.01）， and the skeletal muscle cells of the soleus muscle were markedly enlarged. CONCLUSIONS C. morifolium water extract can improve skeletal muscle atrophy in rats after ischemic stroke， the mechanism of which may be associated with suppressing the activation of the TNF- α/JNK/MAPK E-mail：19932015@cdutcm.edu.cn signaling pathway.

Stroke is the main cause of death and disability among adults in China and is characterized by high incidence， disability， mortality， and recurrence rates. The combination of traditional Chinese and Western medicine has great potential in treating stroke and its sequelae. The classic traditional Chinese medicine prescription Da Chengqitang （DCQT） has a long history and proven efficacy in treating stroke. Clinically， DCQT is often used to treat stroke and its sequelae. However， the number and quality of clinical trials of DCQT in treating stroke need to be improved. Because of the insufficient basic research， the active ingredients and multi-target mechanism of action of DCQT remain unclear. Our research group has previously confirmed that DCQT can effectively reverse neurological damage， reduce iron deposition， and downregulate the levels of pro-inflammatory cytokines in the rat model of hemorrhagic stroke. The treatment mechanism is related to the nuclear factor erythroid 2-related factor 2 （Nrf2）-mediated signaling pathway and p38 mitogen-activated protein kinase （MAPK） signaling-mediated microglia activation. To clarify the pharmacodynamic basis and anti-stroke mechanism of DCQT， this article reviews the research progress in the treatment of stroke with DCQT in terms of clinical trials， pharmacodynamic material basis， safety evaluation， and mechanisms of absorbed components. This article summarizes 45 major phytochemical components of DCQT， 11 of which are currently confirmed absorbed components. Among them， emodin， rhein， chrysophanol， aloe-emodin， synephrine， hesperidin， naringin， magnolol， and honokiol can be used as quality markers （Q-markers） of DCQT. The mechanism of DCQT in treating stroke is complex， involving regulation of inflammatory responses， neuronal damage， oxidative stress， blood-brain barrier， brain-derived neurotrophic factor， and anti-platelet aggregation. This article helps to deeply understand the pharmacodynamic basis and mechanism of DCQT in treating stroke and provides a theoretical basis for the clinical application of DCQT in treating stroke and the development of stroke drugs.

OBJECTIVE To analyze the standardization and influential factors medication use for the prevention and treatment of glucocorticoid-induced osteoporosis （GIOP）. METHODS The data of inpatients diagnosed as rheumatic immune diseases in our hospital from January 1， 2022， to December 31， 2023， who required long-term use of glucocorticoids， were collected to analyze the risk stratification for GIOP-related fractures and the utilization of prevention and treatment drug in patients. Univariate analysis and Logistic stepwise regression analysis were employed to screen the factors influencing the standardization of prevention and treatment drug use in patients. RESULTS Among 354 patients， 148 patients （41.81%） had a low risk of osteoporotic fractures， 103 patients （29.10%） had a moderate risk， and 103 patients （29.10%） had a high risk. The top three drugs used in the prevention and treatment of GIOP were calcium supplements （78.81%）， vitamin D preparations （74.01%）， and anti-osteoporosis drugs （21.19%）. A total of 133 patients （37.57%） used the drugs for GIOP prevention and treatment in a standardized manner. The standardization rate of prevention and treatment in patients with low fracture risk was significantly higher than those with high and moderate fracture risk， and the standardization rate in patients with high fracture risk was significantly higher than those with moderate fracture risk （P＜0.05）. Besides， the univariate analysis showed that low fracture risk served as a prevention factor for the standardized use of prevention and treatment drugs for GIOP， while moderate fracture risk， smoking or drinking， the occurrence of adverse drug reactions， and having an educational level below junior college were risk factors for the normative use of GIOP prevention and treatment drug （P＜0.05）. Logistic stepwise regression analysis showed that patients with low and moderate fracture risk， a history of smoking or drinking， and adverse drug reactions to anti-osteoporosis drugs had a lower standardization rate of prevention and treatment； patients who visited tertiary hospital for the past month and had a longer duration of glucocorticoid use had a higher standardization rate of prevention and treatment （P＜0.05）. CONCLUSIONS The standardized rate of prevention and treatment drugs used for GIOP in our hospital is relatively low. Patients with moderate to high fracture risk， a history of smoking or drinking， and those who experience adverse drug reactions after taking anti-osteoporosis drugs have lower rates of standardized prevention and treatment. Conversely， patients who sought treatment at tertiary hospital for the past month and had a longer duration of glucocorticoid had higher rates of standardized prevention and treatment.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Background/Aims: Transmembrane 4 L six family member 1 (TM4SF1) is highly expressed and contributes to the progression of various malignancies. However, how it modulates hepatocellular carcinoma (HCC) progression and senescence remains to be elucidated. Methods: TM4SF1 expression in HCC samples was evaluated using immunohistochemistry and flow cytometry. Cellular senescence was assessed through SA-β-gal activity assays and Western blot analysis. TM4SF1-related protein interactions were investigated using immunoprecipitation-mass spectrometry, co-immunoprecipitation, bimolecular fluorescence complementation, and immunofluorescence. Tumor-infiltrating immune cells were analyzed by flow cytometry. The HCC mouse model was established via hydrodynamic tail vein injection. Results: TM4SF1 was highly expressed in human HCC samples and murine models. Knockdown of TM4SF1 suppressed HCC proliferation both in vitro and in vivo, inducing non-secretory senescence through upregulation of p16 and p21. TM4SF1 enhanced the interaction between AKT1 and PDPK1, thereby promoting AKT phosphorylation, which subsequently downregulated p16 and p21. Meanwhile, TM4SF1-mediated AKT phosphorylation enhanced PD-L1 expression while reducing major histocompatibility complex class I level on tumor cells, leading to impaired cytotoxic function of CD8+ T cells and an increased proportion of exhausted CD8+ T cells. In clinical HCC samples, elevated TM4SF1 expression was associated with resistance to anti-PD-1 immunotherapy. Targeting TM4SF1 via adeno-associated virus induced tumor senescence, reduced tumor burden and synergistically enhanced the efficacy of anti-PD-1 therapy. Conclusions Our results revealed that TM4SF1 regulated tumor cell senescence and immune evasion through the AKT pathway, highlighting its potential as a therapeutic target in HCC, particularly in combination with first-line immunotherapy.

BACKGROUND:The reasonable implantation range of femoral prosthesis in unicompartmental knee arthroplasty in patients with osteoporosis has not been investigated,and previous studies have often been based on unicompartmental knee arthroplasty models in normal bone,with fewer mechanical studies in models with non-normal bone.Complications after unicompartmental knee arthroplasty have been shown to be highly associated with osteoporosis. OBJECTIVE:To analyze the biomechanical effects of the coronal inclination of the Sled fixed platform femoral prosthesis on unicompartmental knee arthroplasty in patients with osteoporosis and to find the correlation between osteoporosis and mid-and long-term complications after unicompartmental knee arthroplasty. METHODS:Based on the digital imaging technology to obtain the data of the knee joint and prosthesis,a normal bone knee model is then created by using specialized software such as Mimics and Geomagic studio.Based on a validated normal bone knee model,an osteoporotic knee model was created by changing the material parameters.Totally 14 unicompartmental knee arthroplasty finite element models were created using Sled fixed platform femoral prosthesis:standard position(0°),varus and valgus angles:3°,6°,9° in the normal bone and osteoporosis groups.Stress changes on the surface of polyethylene liner,cancellous bone under tibial prosthesis,and cortical bone were calculated and analyzed in all unicompartmental knee arthroplasty models. RESULTS AND CONCLUSION:(1)In the osteoporotic models,the high stress values of the polyethylene liner surface and the cancellous bone under the tibial prosthesis increased with the increase of the tilt angle of the femoral prosthesis,and the high stress values of the cortical bone surface under the tibial prosthesis increased with the increase of the prosthesis valgus angles and decreased with the increase of the varus angles.(2)For the polyethylene liner surface as well as the subcortical bone surface of the tibial prosthesis,the high stress values of the models for each inclination angle in the osteoporosis group were greater than those of the corresponding models in the normal bone group.For the surface of the cancellous bone under the tibial prosthesis,the high stress values of the tilt angle models of the osteoporosis groups were smaller than those of the normal bone groups.(3)Osteoporosis may cause biomechanical abnormalities in the internal structures of the knee after unicondylar replacement,increasing the potential risk of postoperative aseptic loosening of the prosthesis and periprosthetic fractures.Varus and valgus of the femoral prosthesis in the coronal plane should be avoided as much as possible when performing medial unicompartmental knee arthroplasty with a Sled fixation platform in osteoporotic knees.