Projection micro stereolithography three-dimensional(3D)printing method was proposed in this study to fabricate complex microchannels of combined cross-sections.By using 3D printing and polydimethylsiloxane(PDMS)replication methods,two inertial microfluidic chips of three-step and five-step cross-sections were fabricated,and the dimension precisions of the microchannels were controlled within 20 μm.Using the microfluidic chips,the movements of two fluorescent polystyrene particles with diameters of 10 and 6 μm in the stepped channels were investigated.In addition,numerical simulations were applied to demonstrate the inertial focusing mechanisms of particles in the channels.It was found that 10-μm particles had three equilibrium positions in the three-step channel,which located at the inner walls of the three steps,respectively,and most particles focused at the inner step.The 6-μm particles also had three equilibrium positions in the three-step channel.However,the particles migrated to the middle and the outer steps under high flow rates.In the five-step channel,when the flow rate was increased gradually,10-μm particles had a single and two equilibrium positions,respectively,and the particles migrated towards the inner channel wall under high flow rates.In comparison to 10-μm particles,6-μm particles had two stable equilibrium positions in the five-step channel at all flow rate range.It could be concluded that the quantity,shape and strength of the secondary flow vortex could be altered by changing structure of the combined cross-section,thus the equilibrium positions and quantities of the focusing particles could be also regulated.The research outcome might provide new insights for precise cell inertial manipulation and promote the application and development of inertial microfluidic technology in biomedical and other fields.

Objective:To measure and compare the difference of personal attenuation rating (PAR) of the workers wearing foam earplugs before and after the training, and to evaluate the effect of ear protector wearing training on the noise protection.Methods:In February 2023, 94 workers exposed to noise in a machinery manufacturing factory were selected as subjects. The production noise in the workplace was measured and subjects were trained to wear earplugs. The PAR values of wearing 3M 1110 foam test earplugs were measured and recorded before and after the training by using the fit testing of hearing protection device. The differences between the actual PAR values with nominal values and the noise attenuation values in related standards were compared, and the protective effect of hearing protection device before and after training was evaluated.Results:The average age of the subjects was (36.76±11.48) years old, the average length of service was (16.34±11.64) years, and the average exposure time to noise was (15.67±11.64) years. The noise detection results of the subjects' posts were ranged from 80.1 to 94.3 dB (A). The results of subjects wore 3M 1110 foam test earplugs for fit testing showed that the binaural PAR value after training was (19.3±6.4) dB (A), which was significantly higher than that before training (11.1±7.4) dB (A) ( t=13.31, P<0.001). After training, 11 people (11.70%) could reach the corrected noise reduction value (NRR value), 26 people (27.66%) could reach the standard of single noise reduction value (SNR value) ×0.6, and 84 people (89.36%) could reach the standard of (NRR-7) /2. The under protection rate of hearing protectors after training (7.45%) was significantly lower than that before training (45.74%), and the difference of different protection levels before and after training was statistically significant (χ 2=40.83, P<0.001) . Conclusion:It is suggested that enterprises should use the fit testing instead of nominal value estimation to evaluate the noise reduction effect of hearing protection device. Special training on the selection and use of hearing protection device should be strengthened, so as to ensure that workers wear them correctly and improve the protective effect of hearing protection device.

Objective:To measure and compare the difference of personal attenuation rating (PAR) of the workers wearing foam earplugs before and after the training, and to evaluate the effect of ear protector wearing training on the noise protection.Methods:In February 2023, 94 workers exposed to noise in a machinery manufacturing factory were selected as subjects. The production noise in the workplace was measured and subjects were trained to wear earplugs. The PAR values of wearing 3M 1110 foam test earplugs were measured and recorded before and after the training by using the fit testing of hearing protection device. The differences between the actual PAR values with nominal values and the noise attenuation values in related standards were compared, and the protective effect of hearing protection device before and after training was evaluated.Results:The average age of the subjects was (36.76±11.48) years old, the average length of service was (16.34±11.64) years, and the average exposure time to noise was (15.67±11.64) years. The noise detection results of the subjects' posts were ranged from 80.1 to 94.3 dB (A). The results of subjects wore 3M 1110 foam test earplugs for fit testing showed that the binaural PAR value after training was (19.3±6.4) dB (A), which was significantly higher than that before training (11.1±7.4) dB (A) ( t=13.31, P<0.001). After training, 11 people (11.70%) could reach the corrected noise reduction value (NRR value), 26 people (27.66%) could reach the standard of single noise reduction value (SNR value) ×0.6, and 84 people (89.36%) could reach the standard of (NRR-7) /2. The under protection rate of hearing protectors after training (7.45%) was significantly lower than that before training (45.74%), and the difference of different protection levels before and after training was statistically significant (χ 2=40.83, P<0.001) . Conclusion:It is suggested that enterprises should use the fit testing instead of nominal value estimation to evaluate the noise reduction effect of hearing protection device. Special training on the selection and use of hearing protection device should be strengthened, so as to ensure that workers wear them correctly and improve the protective effect of hearing protection device.

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

Objective To explore the effectiveness and safety of percutaneous coronary artery shock wave balloon angioplasty(IVL)under the guidance of intravascular ultrasound(IVUS)for the treatment of severe calcification lesions in the left main artery(LM).Methods A total of 26 patients with severe LM(mouth,body,bifurcation)calcification admitted to Jiangnan University Affiliated Hospital from October 2022 to April 2024 were included,with an average age of 72.0(61.8,75.4)years.Under the guidance of IVUS,IVL was used for pre-treatment of calcified lesions,followed by percutaneous coronary intervention(PCI)with stent/drug balloon implantation.All patients were evaluated using IVUS before and after the use of IVL and after PCI.And compare the IVUS intracavity related data before and after treatment[plaque burden(PB)、minimum lumen area(MLA)、minimum lumen diameter(MLD)]and calcification fracture number,minimum stent area(MSA),stent expansion coefficient(expansion,EXP),etc.Results There were 26 patients(2 with opening lesions,7 with body lesions,and 17 with bifurcation lesions at the end of the main trunk),including 7 with stable angina pectoris(SAP),10 with unstable angina(UA),4 with acute ST-segment elevation myocardial infarction(STEMI),and 5 with non ST-segment elevation myocardial infarction(NSTEMI).The PB at the most severe site of calcification decreased by 79.50(76.00,83.75)％compared to 80.00(76.00,83.75)％after IVL(P=0.001),MLA increased by 3.39(3.14,3.68)mm2 compared to 3.38(3.14,3.67)mm2 after IVL(P=0.039),MLD increased by 3.21(3.07,3.30)mm compared to 3.20(3.07,3.30)mm after IVL(P=0.024),and there was 100％calcification rupture(1/2 cases,2/9 cases,≥3/15 cases).The stent/drug ball was successfully implanted 100％,with EXP of(89.15±4.42)％and an MSA of 7.20(6.46,7.45)mm2.No adverse events such as death,angina or recurrent myocardial infarction occurred during the 3 months follow-up after surgery.Conclusions After evaluation by IVUS and pre-treatment with IVL,PCI was successfully completed for severe calcification lesions in LM,and IVL can be used as an option for the treatment of severe calcification in LM.

Objective:To investigate the combination of internal fixation for periprosthetic fractures of the proximal femur (PFFF) after hip arthroplasty.Methods:The data of 58 patients with periprosthetic fractures after hip arthroplasty from May 2008 to March 2022 were retrospectively analyzed, including 31 males and 27 females. The average age was 75.5±18.2 years (range, 35-95 years). There were 39 total hip arthroplasty and 19 hemiarthroplasty; 37 biological prosthesis and 21 cemented prosthesis. Intraoperative periprosthetic fractures occurred in 6 cases and 52 cases postoperatively. Unified classification system (UCS): UCS IV.3A1 type 2 cases, 3A2 type 1 case, 3B1.1 type 19 cases, 3B2.1 type 25 cases, 3B3 type 2 cases, 3C type 9 cases. Fracture site: 3 cases in zone A (greater trochanter), 46 cases in zone B (around the femoral stem), and 9 cases in zone C (distal to the tip of the femoral stem. Internal fixation is composed of primary and secondary fixation, the main fixation method was the cerclage of steel wire or titanium cable, locking compression plate, and locking attachment plate fixation. The secondary fixation method was the cerclage of titanium cable, which was required to cover three zones A, B and C to form an overall balanced fixation. The modified Harris hip scores (mHHS), plate length, working length and screw number of different internal fixation combinations were compared.Results:The follow-up time was 54.2±21.6 months (range, 11-86 months). All patients showed signs of fracture healing at 10.2±1.5 weeks (range, 7-13 weeks) after operation, and bony union was observed at 19.6±1.3 weeks (range, 17-22 weeks) after operation. No delayed union or nonunion was observed. After operation, one case had a stress fracture and was revised with double-plate internal fixation; one case had a failed internal fixation and was revised with double-plate internal fixation and a large allograft bone graft. The mHHS score of UCSIV.3B2.1 group (80.3±4.6) was the lowest at 6 months after operation, and the difference between the groups of different types was statistically significant ( F=256.72, P<0.001). The score of simple internal fixation group (91.6±4.2) was higher than that of revision combined with internal fixation group (81.9±4.1), and the difference was statistically significant ( t=8.32, P<0.001). The plate length and working length were 24.9±2.5 cm and 12.6±1.7 cm for UCS IV.3B1.1, 25.4±2.6 cm and 13.6±1.8 cm for 3B2.1 and 28.1±2.5 cm and 4.9±1.9 cm for 3C, respectively ( F=5.33, P=0.005; F=6.78, P<0.001). The number of screws in zone A was significant difference among different UCS types ( F=52.67, P<0.001); UCS IV.3B1.1 (6.5±2.3) and 3B2.1 (6.7±2.2) were more than 3B3 (3.5±1.5) and 3C (3.7±1.6). The number of screws in zone B was significant difference among different UCS types ( F=42.15, P<0.001); The number of UCS IV.3B1.1 (2.3±1.6) and 3B2.1 (2.8±1.9) were significantly more than that of 3B3 (1.0±0.5) and 3C (1.2±0.6). The number of screws in zone C was significant differences among different UCS types ( F=39.62, P<0.001); The number of UCS IV.3B1.1 (3.8±1.9) and 3B2.1 (3.9±1.7) were more than that of 3B3 (2.0±0.5), the difference was statistically significant ( P<0.05). Conclusion:The function of hip after simple internal fixation of proximal femoral periprosthetic fractures was better than that of those who underwent revision at the same time; the number of screws of UCSIV.B1 and B2 is more than that of B3.

Objective: To investigate the effect of acetyl-CoA carboxylase 1 (ACC1) knockdown on the migration of esophageal squamous cell carcinoma (ESCC) KYSE-450 cell and underlying mechanism. Methods: Lentiviral transfection was conducted to establish sh-NC control cell and ACC1 knocking down cell (sh-ACC1). Human siRNA HSP27 and control were transfected by Lipo2000 to get si-HSP27 and si-NC. The selective acetyltransferase P300/CBP inhibitor C646 was used to inhibit histone acetylation and DMSO was used as vehicle control. Transwell assay was performed to detect cell migration. The expression of HSP27 mRNA was examined by reverse transcription-quantitative real-time polymerase chain reaction (RT-qPCR) and the expressions of ACC1, H3K9ac, HSP27 and epithelial-mesenchymal transition-related proteins E-cadherin and Vimentin were detected by western blot. Results: The expression level of ACC1 in sh-NC group was higher than that in sh-ACC1 group (P<0.01). The number of cell migration in sh-NC group was (159.00±24.38), lower than (361.80±26.81) in sh-ACC1 group (P<0.01). The protein expression levels of E-cadherin and Vimentin in sh-NC group were statistically significant compared with sh-AAC1 group (P<0.05). The migrated cell number in sh-NC+ si-NC group was (189.20±16.02), lower than (371.60±38.40) in sh-ACC1+ si-NC group (P<0.01). The migrated cell number in sh-NC+ si-NC group was higher than that in sh-NC+ si-HSP27 group (152.40±24.30, P<0.01), and the migrated cell number in sh-ACC1+ si-NC group was higher than that in sh-ACC1+ si-HSP27 group (P<0.01). The protein expression levels of E-cadherin and Vimentin in sh-NC+ si-NC group were significantly different from those in sh-ACC1+ si-NC and sh-NC+ si-HSP27 groups (P<0.01). The protein expression levels of E-cadherin and Vimentin in sh-ACC1+ si-NC group were significantly different from those in sh-ACC1+ si-HSP27 group (P<0.01). After 24 h treatment with C646 at 20 μmmo/L, the migrated cell number in sh-NC+ DMSO group was (190.80±11.95), lower than (395.80±17.10) in sh-ACC1+ DMSO group (P<0.01). The migrated cell number in sh-NC+ DMSO group was lower than that in sh-NC+ C646 group (256.20±23.32, P<0.01). The migrated cell number in sh-ACC1+ DMSO group was higher than that in sh-ACC1+ C646 group (87.80±11.23, P<0.01). The protein expressions of H3K9ac, HSP27, E-cadherin and Vimentin in sh-NC+ DMSO group were significantly different from those in sh-ACC1+ DMSO group and sh-NC+ C646 group (P<0.01). The protein expression levels of H3K9ac, HSP27, E-cadherin and Vimentin in sh-ACC1+ DMSO group were significantly different from those in sh-ACC1+ C646 group (P<0.01). Conclusion: Knockdown of ACC1 promotes the migration of KYSE-450 cell by up-regulating HSP27 and increasing histone acetylation.
Humans ; Esophageal Neoplasms/pathology* ; Esophageal Squamous Cell Carcinoma/genetics* ; Vimentin/metabolism* ; Dimethyl Sulfoxide ; HSP27 Heat-Shock Proteins/metabolism* ; Histones/metabolism* ; Cadherins/metabolism* ; Cell Movement ; Cell Line, Tumor ; Cell Proliferation/genetics* ; Epithelial-Mesenchymal Transition/genetics* ; Gene Expression Regulation, Neoplastic

OBJECTIVE To investigate the inhibitory effect and the possible mechanism of hydrogen sulfide （H2S） on the proliferation of cardiac fibroblasts. METHODS The heart of neonatal SD rats was collected， and cardiac fibroblasts were separated with differential centrifugation. Using sodium hydrosulfide as the donor of H2S， the effects of H2S on the proliferation of cardiac fibroblasts induced by angiotensin Ⅱ （Ang Ⅱ）， hydroxyproline content and the expression of sirtuin 3 （SIRT3） protein were detected. After SIRT3 knockdown with siRNA technology， the effects of H2S on the proliferation of cardiac fibroblasts induced by Ang Ⅱ， hydroxyproline content， the expressions of collagen Ⅰ （Col Ⅰ）， collagen Ⅲ （Col Ⅲ ） and optic atrophy protein 1 （OPA1） were detected. RESULTS H2S could inhibit the proliferation of Ang Ⅱ-induced cardiac fibroblasts， reduce the content of hydroxyproline and increase the expression of SIRT3 （P＜0.05）. After down-regulating the expression of SIRT3 with siRNA technology， the inhibition of H2S on the proliferation of Ang Ⅱ-induced cardiac fibroblasts and the reduction of hydroxyproline content were both inhibited， and the effect of H2S on reducing the expression of Col Ⅰ and Col Ⅲ and enhancing the expression of OPA1 was also significantly weakened. CONCLUSIONS H2S inhibits the proliferation of Ang Ⅱ -induced cardiac fibroblasts through increasing the expression of SIRT3.

Humans ; Ankle ; Ankle Joint/surgery* ; Arthritis ; Arthrodesis ; Lower Extremity ; Hemophilia A/complications*

The awake prone position plays an important role in the treatment of hypoxemia and the improvement of respiratory distress symptoms in non-intubated patients. It is widely used in clinical practice because of its simple operation, safety, and economy. To enable clinical medical staff to scientifically and normatively implement prone position for awake patients without intubation, the committees of consensus formulation, guided by evidence-based methodology and Delphi method, conducted literature search, literature quality evaluation and evidence synthesis around seven topics, including indications and contraindications, evaluation, implementation, monitoring and safety management, termination time, complication prevention and health education of awake prone position. After two rounds of expert letter consultation, Expert consensus on implementation strategy of awake prone positioning for non-intubated patients in China (2023) was formulated, and provide guidance for clinical medical staff.
Humans ; Consensus ; Prone Position ; Wakefulness ; China ; Dyspnea