Objective : To investigate the status of occupational stress and analyze its influencing factors among frontline employees working in a chemical fiber manufacturing enterprise, so as to provide insights into the development of occupational stress interventions. Methods : The frontline employees working in a chemical fiber manufacturing enterprise were selected as the study subjects using a cluster sampling method in October 2018. The status of occupational stress was investigated using the Chinese version of the effort-reward imbalance ( ERI ) questionnaire. The influencing factors for occupational stress were identified using a multivariable logistic regression model. Results : A total of 1 780 questionnaires were sent out, and 1 115 valid ones ( 62.64% ) were recovered. Among the 1 115 respondents, there were 427 men ( 38.30% ) and 688 women ( 61.70% ), and 71.22% were at ages of 21 to 39 years. There were 561 respondents with < 1 year of service ( 50.31% ), and the longest length of service was 11 years. In addition, there were 1 069 respondents ( 95.87% ) exposed to high noise, and 346 respondents ( 31.03% ) were diagnosed at a high occupational-stress state and 769 ( 68.97% ) at a low state. Multivariable logistic regression analysis identified 5 years or longer of service ( OR=1.540, 95%CI: 1.057-2.245 ) and exposure to high noise ( OR=1.917, 95%CI: 1.004-3.659 ) as risk factors for occupational stress among frontline employees in the chemical fiber manufacturing enterprise. Conclusions There are 31.03% of frontline employees at a high occupational-stress state in the chemical fiber manufacturing enterprise, and a high occupational-stress state is associated with exposure to high noise and 5 years or longer of service.

Midpalatal corticotomy-assisted rapid maxillary expansion (MCRME) is a minimally invasive treatment of maxillary transverse deficiency (MTD) in young adults. However, the effect of MCRME on respiratory function still needs to be determined. In this study, we evaluated the changes in maxillary morphology and the upper airway following MCRME using computational fluid dynamics (CFD). Twenty patients with MTD (8 males, 12 females; mean age 20.55 years) had cone-beam computed tomography (CBCT) images taken before and after MCRME. The CBCT data were used to construct a three-dimensional (3D) upper airway model. The upper airway flow characteristics were simulated using CFD, and measurements were made based on the CBCT images and CFD. The results showed that the widths of the palatal bone and nasal cavity, and the intermolar width were increased significantly after MCRME. The volume of the nasal cavity and nasopharynx increased significantly, while there were no obvious changes in the volumes of the oropharynx and hypopharynx. CFD simulation of the upper airway showed that the pressure drop and maximum velocity of the upper airway decreased significantly after treatment. Our results suggest that in these young adults with MTD, increasing the maxillary width, upper airway volume, and quantity of airflow by MCRME substantially improved upper airway ventilation.

Objective:To explore the occupational stress status and influencing factors of workers in a textile factory in Zhejiang Provice.Methods:In October 2018, 505 workers from a textile factory in Zhejiang Province were selected as research objects by convenient sampling method. A total of 505 questionnaires were distributed, 495 of which were effective and the effective recovery rate was 98.0%. Job Content Questionnaire (JCQ) and Effort Reward Imbalance Questionnaire (REI) were used to investigate textile workers' occupational stress and analyze its influencing factors. The differences of the composition ratio of different groups were tested by χ 2 test. The influencing factors such as age, gender and occupation on occupational stress were analyzed by multivariate logistic regression. Results:ERI analysis results showed that the high and low occupational stress accounted for 30.1% and 69.9%, respectively. The differences of occupational stress among workers of different job types and working ages were statistically significant ( P<0.05) . The detection rates of high occupational stress of paper workers and spinners were 47.8% (11/23) and 44.8% (30/67) , respectively, higher than other jobs. The detection rate of high occupational stress for workers with more than 5 years of service was 46.4% (13/28) . The results of JCQ analysis showed that there was no statistical significance in the differences of daily working hours and length of service between different gender, education levels, types of work patterns, and occupational stress ( P>0.05) . Job types had significant effects on the occupational stress defined by ERI ( P<0.05) , the risk of occupational stress was 2.151 times than that of the coiler. Conclusion:There are significant differences in occupational stress risk among workers of different types of work in textile industry, so different measures should be taken to prevent and control occupational stress in different jobs.

Objective:To explore the occupational stress status and influencing factors of workers in a textile factory in Zhejiang Provice.Methods:In October 2018, 505 workers from a textile factory in Zhejiang Province were selected as research objects by convenient sampling method. A total of 505 questionnaires were distributed, 495 of which were effective and the effective recovery rate was 98.0%. Job Content Questionnaire (JCQ) and Effort Reward Imbalance Questionnaire (REI) were used to investigate textile workers' occupational stress and analyze its influencing factors. The differences of the composition ratio of different groups were tested by χ 2 test. The influencing factors such as age, gender and occupation on occupational stress were analyzed by multivariate logistic regression. Results:ERI analysis results showed that the high and low occupational stress accounted for 30.1% and 69.9%, respectively. The differences of occupational stress among workers of different job types and working ages were statistically significant ( P<0.05) . The detection rates of high occupational stress of paper workers and spinners were 47.8% (11/23) and 44.8% (30/67) , respectively, higher than other jobs. The detection rate of high occupational stress for workers with more than 5 years of service was 46.4% (13/28) . The results of JCQ analysis showed that there was no statistical significance in the differences of daily working hours and length of service between different gender, education levels, types of work patterns, and occupational stress ( P>0.05) . Job types had significant effects on the occupational stress defined by ERI ( P<0.05) , the risk of occupational stress was 2.151 times than that of the coiler. Conclusion:There are significant differences in occupational stress risk among workers of different types of work in textile industry, so different measures should be taken to prevent and control occupational stress in different jobs.

To determine there characteristic components content of Tibetan Medicine Triphala through establishing a HPLC method and its total tannin content through spectrophotometry. The chromatographic column of Agilent ZORBAX SB-Aq (250 × 4.6 mm, 5 μm) with methanol-0.1％ formic acid/water as the mobile phase, the flow rate 1 mL/min, and the detection wavelength 270 nm was applied to determine the Gallic acid, colijing and ellagic acid content in medicinal materials and the tannin parts of Tibetan Medicine Triphala. With the gallic acid as control group, total tannin content of Triphala and its tannin parts was determined through spectrophotometry. It revealed in the HPLC test that the linear range of gallic acid, coracine and ellagic acid was 0.91-4.55 μg, 0.274-1.368 μg and 0.329-2.634 μg respectively. It also showed that the average recovery rates of the three components in the medicinal materials were 101.06％, 101.72％and 100.27％ respectively. And the average recovery rates of the three components in the tannins were 100.4％, 100.85％and 101.70％ respectively. The result of spectrophotometry showed that gallic acid was linear in1.008-10.08 μg·mL-1, and that the recovery rate of medicinal materials and tannin parts were 100.25％ and 100.52％ respectively. The method is rapid, accurate and repeatable, and it can provide basis for the quality control of Tribescens and its tannins.

This paper was aimed to establish the HPLC fingerprint of T.Billerica (Gaertn.) Roxb.tannin fraction.The analysis was performed on Atlantic T3 (250 mm × 4.6 mm,5 μm) C18 column.The mobile phase was acetonitrile-0.2％ glacial acetic acid aqueous solution with gradient elution.The flow rate was 1.0 mL·min-1.The injection size was 20 μL.The temperature was maintained at 30℃.Eleven batches of T.Billerica (Gaertn.) Roxb.tannin fraction of chromatographic data was analyzed by similarity of chromatographic data,SPSS software and SIMCA software.There were 20 common peaks in the diagram.The similarity analysis of 11 samples revealed that the similarities were between 0.832 and 0.973.Only the similarity of tannin parts from Xinjiang was below 0.9.The cluster analysis classified the tannin parts into 3 types,which shared the similar results as the principal components analysis (PCA).PLS-DA found that peak 1,13 and 14 may be the main chromatographic peaks to identify tannins fraction.The HPLC-MSn information of 14 compounds in T.billerica (Gaertn.) Roxb.was summarized.It was concluded that chemometrics analysis method can be used to analyze the HPLC fingerprint of T.billerica (Gaertn.) Roxb.tannin fraction.This method was rapid,simple,and reproducible.It can be used as one of the effective methods for the quality control of T.billerica (Gaertn.) Roxb.tannin fraction.

This article was aimed to study the stability of tannin parts in Phyllanthus emblica L.in artificial gastric and intestinal juice,in order to provide a foundation for in vivo studies of Phyllanthus emblica L.HPLC-UV was used to determine the contents of main ingredients.The results showed that stability of main ingredients of tannin parts in Phyllanthus emblica L.,including gallic acid (GA),corilagin and ellagic acid (EA),in the artificial gastric juice.The content change was not obvious.The residual content was within 100％.The half-life was above 90 h.They were unstable in the artificial intestinal juice.The content was first increased and then decreased.The residual content was 100-300％.The half-life was above 10 h.It was concluded that the tannin parts in Phyllanthus emblica L.was stable in artificial gastric juice.And content changes of main components were not obvious.The tannin parts in Phyllanthus emblica L.were unstable in artificial intestinal juice.The main ingredients were first increased and then decreased.It was speculated that macromolecule can hydrolyze tannin part into small molecules.Hnwever,as time increases,all components may be decomposed.

This study was aimed to optimize the extraction method for total polyphenol from Phyllanthus emblica through multi-target orthogonal experiment,in order to provide data reference for its industrial production.The comprehensive evaluation indexes included the extraction yield,extraction percentage of total polyphenol,chebulagic acid,gallic acid,mucic acid-2-O-gallate,were verified.The ethanol concentration,solid-liquid ratio and extraction time were crucial indexes for orthogonal design.The results showed that the best extraction process was using 10 times dosage 70％ ethanol,to extract the medical material three time,90 minutes for every time.It was concluded that the extraction technology was reliable.This method was stable,quick and simple.It laid a fundamental foundation for the extraction method exploration.

High performance liquid chromatography (HPLC) fingerprint technology is an important means of quality control of traditional Chinese medicine (TCM) preparations,which can reflect the whole process of raw materials as well as the whole process and quality of finished products.It has become the primary quality control method of modern TCM preparations.In this paper,recent advances in HPLC fingerprints and their combination techniques in the quality control of TCM preparations were reviewed,which provided the basis for quality control of TCM preparations.

PK-PD binding model is a powerful tool to study the relationship between drug time-concentration,concentration-effect and time-effect,which is of great significance and widely used in guiding clinical medicine.The PK-PD binding model is applied to the study of traditional Chinese medicine (TCM),which is helpful to elucidate the basis of drug substance and its mechanism.It is of great significance to the development of TCM and its preparation.In this paper,recent applications of PK-PD binding model in the composition and effective part of TCM,single herbal medicine and TCM compound were made,which could provide references for future PK-PD study of chemical constituent.