Objective: To explore the potential category patterns of risk prevention and control behaviors of HIV infection among young students who have sex with men (MSM) and their impact on HIV infection and late detection, aiming to optimize intervention strategies. Methods: From September 2017 to December 2024, a total of 1 637 MSM young students in Tianjin were recruited through both online and offline channels. Latent class analysis was applied to classify 11 HIV risk prevention and control behaviors [condom use during the most recent anal sex in the past 6 months, consistent condom use, use of water based lubricants, abstinence from recreational drugs, regular on site professional testing, fixed sexual partners, partner testing, awareness of partner s HIV testing results, testing before sexual activity, nucleic acid testing, and use of pre exposure prophylaxis (PrEP) or post exposure prophylaxis (PEP)]. Multivariate Logistic regression analyzed associations between demographic characteristics/intervention services factors and latent classes. Differences in HIV infection and late detection across behavior patterns were compared. Results: HIV risk prevention and control behaviors among MSM students were classified into three latent classes:condom dependent group (38.42%), low prevention group (27.73%), and comprehensive prevention group (33.85%). Students who received condom promotion/testing services were more likely to belong to the comprehensive prevention group ( OR =5.58), while those who received peer education were less likely to the comprehensive prevention group ( OR =0.43) (both P <0.01). Among the MSM student population, the HIV infection rate was 4.83%, with 2.26% of cases detected late. The HIV infection rate (1.45%) and late detection proportion (0.82%) in the comprehensive prevention group were lower than those in the low prevention group (7.89% and 3.83%, respectively) ( χ 2=16.20, 7.31, both P <0.01). Conclusions HIV risk prevention and control behaviors among MSM young students exhibit significant heterogeneity. Comprehensive prevention strategies can effectively reduce HIV infection and late detection risks. It is necessary to optimize peer education content and improve the accessibility of diversified prevention measures such as PrEP/PEP to enhance HIV prevention and control.

Objective To understand the situation of dental cone beam computed tomography (CBCT) quality control testing phantoms in radiation health technical service institutions in Guangdong province, analyze the differences among different phantoms, and provide a reference for dental CBCT quality control testing. Methods The testing phantoms of 49 radiation health technical service institutions were used as the research objects. The designated CBCT equipment was used for scanning and imaging. The Z-score method was used to evaluate the high-contrast resolution, low-contrast resolution, and distance measurement deviation of each phantom. Results The satisfaction rates of various items for the phantoms in 49 institutions ranged from 85.7% to 100%. The distance measurement deviations of four institutions were “suspicious”, and the high-contrast resolution of four institutions and the distance measurement deviation of one institution were “unsatisfactory”. Conclusion The overall performance of dental CBCT quality control testing phantoms in radiological health technical service institutions in Guangdong province is satisfactory. However, there are still some phantoms with poor results in items such as distance measurement deviation and high-contrast resolution. The structural design, material selection, and manufacturing process of the phantom may all affect the results of quality control testing. Therefore, appropriate phantoms, optimized exposure conditions, and suitable reconstruction algorithms should be used in CBCT quality control testing to ensure accurate and reliable measurements.

In order to provide a reference basis for the development of relevant compound preparations， this article takes a comprehensive analysis of the usage and dosage of famous classical formulas in Han dynasty from various perspectives， and gives corresponding countermeasures on this basis. Through the comprehensive analysis of the classification and statistics of Zhongjing's medication characteristics， decoction methods， administration and dosage， and combining conversion methods of weights and measures by ancient medical practitioners， along with the dosage and administration of the listed Han dynasty famous classical formulas， it was found that the "Jiangxi method" served as a general guideline for administration according to Zhongjing's original text. This method allowed for flexible dosing based on the conversion of the ancient measurements to modern equivalents［13.8 g per Liang（两）］， ensuring the safe and effective medication of these formulas. After combing， it is found that although the dosage of single medicine is large in famous classical formulas from Han dynasty， the administration is flexible. The crude drug amount per administration serves as the foundational dose， with the frequency of administration adjusted flexibly according to the condition. This dosing approach becomes the key for the rational development of compound formulations of famous classical formulas. Based on the conclusions of the study， it is recommended that when developing compound formulations of famous classical formulas in Han dynasty， the original administration method and dosage should be respected. The original crude drug amount per administration should be considered as the daily foundational dose， with the frequency of administration described within a range（1 to N times per day， where N is the maximum number of administrations as per the original text）. The specific frequency of administration can be adjusted flexibly by clinical practitioners based on the individual condition. This approach should also be adopted in toxicological studies， where the dosage per administration serves as the basis for toxicity research， and the toxicity profile at the maximum administration frequency should be observed， providing guidance on the clinical safety range. Corresponding drug labels should provide information within a range to indicate toxicological risk intervals.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Objective     To construct a radiomics model for identifying clinical high-risk carotid plaques. Methods     A retrospective analysis was conducted on patients with carotid artery stenosis in China-Japan Friendship Hospital from December 2016 to June 2022. The patients were classified as a clinical high-risk carotid plaque group and a clinical low-risk carotid plaque group according to the occurrence of stroke, transient ischemic attack and other cerebrovascular clinical symptoms within six months. Six machine learning models including eXtreme Gradient Boosting, support vector machine, Gaussian Naive Bayesian, logical regression, K-nearest neighbors and artificial neural network were established. We also constructed a joint predictive model combined with logistic regression analysis of clinical risk factors. Results    Finally 652 patients were collected, including 427 males and 225 females, with an average age of 68.2 years. The results showed that the prediction ability of eXtreme Gradient Boosting was the best among the six machine learning models, and the area under the curve (AUC) in validation dataset was 0.751. At the same time, the AUC of eXtreme Gradient Boosting joint prediction model established by clinical data and carotid artery imaging data validation dataset was 0.823. Conclusion     Radiomics features combined with clinical feature model can effectively identify clinical high-risk carotid plaques.

ObjectiveBased on the quality evaluation experience of "it is better to have a fragrant and strong aroma" summarized by materia medica of past dynasties， the chemical components of Sojae Semen Nigrum（SSN） and Sojae Semen Praeparatum（SSP） were systematically compared and analyzed， and the main fermentation products in different fermentation time were quantitatively analyzed， so as to clarify the transformation law of internal components in the processing process and provide scientific basis for the modern quality control of SSP. MethodUltra performance liquid chromatography-quadrupole tandem time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was used for the structural identification of the chemical constituents of SSN and SSP， and with the aid of Progenesis QI v2.3 software， the negative ion mode was employed for principal component analysis（PCA） pattern recognition， and the data were analyzed with the aid of orthogonal partial least squares-discriminant analysis（OPLS-DA） for two-dimensional data to obtain S-plot， and components with |P|>0.1 were selected as the differential constituents. The contents of isoflavonoids in SSP during fermentation was determined by UPLC， and the samples were taken every 8 h in the pre-fermentation period and every 2 d in the post-fermentation period， and the dynamic changes of isoflavonoid contents in different fermentation stages were analyzed. The contents of amino acids and nucleosides in SSP and SSN from different fermentation stages were quantitatively analyzed by phenyl isothiocyanate（PITC） pre-column derivatization and high performance liquid chromatography（HPLC） gradient elution， and the contribution of flavor substances to the "delicious" taste of SSP was discussed by taste intensity value（TAV）. ResultA total of 19 kinds of differential components were screened out， mainly soybean saponins and isoflavones， and their contents decreased significantly or even disappeared after fermentation. In the pre-fermentation process of SSP， glycoside bond hydrolysis mainly occurred， and isoflavone glycosides in SSN were degraded and converted into the corresponding aglycones， the content of flavor substances such as amino acids increased gradually. In the post-fermentation process， protein degradation mainly occurred， after 8 d of post-fermentation， the content of isoflavones was basically stable， while the total content of amino acids increased by 8-40 times on average. Different amino acids form the special flavor of SSP， such as the TAV of glutamate is always ahead of other flavor substances， and sweet substances such as alanine and valine have made relatively great contributions to SSP. ConclusionBased on the law of constituent transformation， combined with the traditional evaluation index of "fragrant and strong"， it is difficult to control the fermentation degree of SSP by the existing standards in the 2020 edition of Chinese Pharmacopoeia. It is suggested that description of the characteristics of SSP be refined and changed to "fragrant， delicious and slightly sweet"， and at the same time， the post-fermentation index compounds such as glutamic acid， alanine and valine should be added as the quality control indicators of SSP， so as to standardize the production process and improve the quality of SSP.

BACKGROUND:Piezo1,a mechanosensitive protein,is tightly connected to osteogenic differentiation,and it has been demonstrated that TAZ has a role in regulating osteogenic differentiation.It is unclear whether TAZ participates in the regulation of osteogenic differentiation of human bone marrow mesenchymal stem cells by Piezo1,so it is crucial to investigate its unique mechanism to prevent osteonecrosis of the femoral head. OBJECTIVE:To elucidate what function Piezo1 plays in osteogenic differentiation and TAZ expression in human bone marrow mesenchymal stem cells. METHODS:The siRNA targeting Piezo1 was constructed and transfected into 293T cells.The silencing efficiency was detected by RT-qPCR.The selected Piezo1-Home-2337 was packaged according to the silencing efficiency,and its optimal multiplicity of infection value was assayed by immunofluorescence staining.The packaged Piezo1 silencing recombinant lentivirus was transfected into human bone marrow mesenchymal stem cells,and its silencing effect was detected by RT-qPCR and western blot assay.Alizarin red staining,alkaline phosphatase activity analysis,immunofluorescence staining,RT-qPCR and western blot assay were utilized to analyze the effect of silencing Piezo1 on the osteogenic differentiation of human bone marrow mesenchymal stem cells. RESULTS AND CONCLUSION:(1)The mRNA and protein levels of Piezo1 in human bone marrow mesenchymal stem cells transfected by si-Piezo1 were decreased significantly,with a statistically significant difference compared with normal and negative control groups.(2)The alkaline phosphatase activity in the si-Piezo1 group was much lower and the calcium deposition in the si-Piezo1 group was significantly reduced compared with the negative control group.(3)The mRNA levels of osteogenesis-related genes including Runt-related transcription factor 2(Runx2),osteopontin(OPN),distal-less homeobox 5(DLX5),osteocalcin,β-catenin and Tafazzin(TAZ)in the si-Piezo1 group were significantly decreased compared with the negative control group.Afterward,the expression levels of TAZ and β-catenin protein in the si-Piezo1 group were down-regulated significantly compared with the negative control group,whereas the expression levels of p-TAZ and p-β-catenin protein in the si-Piezo1 group had the opposite condition.(4)The results of immunofluorescence staining showed that the expression of TAZ and β-catenin in human bone marrow mesenchymal stem cells in the si-Piezo1 group was less compared with the negative control group.(5)These findings indicate that Piezo1 can promote the osteogenic differentiation of human bone marrow mesenchymal stem cells.The osteogenic ability of human bone marrow mesenchymal stem cells is significantly reduced after silencing Piezo1,and the expression of TAZ is also reduced.

BACKGROUND:Among the pathogenic factors of cervical spondylosis,herniation of the intervertebral disc,dislocation of the facet joint and the stenosis of the intervertebral foramen are important factors leading to symptoms in patients.Moreover,inappropriate manipulation may aggravate the possibility of cervical disc rupture,leading to exacerbation of symptoms in patients. OBJECTIVE:To compare the effect between sagittal cervical manipulation and traditional cervical rotation manipulation on the area of the intervertebral disc,facet joint and intervertebral foramen at the operative segment by the finite element analysis. METHODS:The neck CT data of a male volunteer with a normal neck were selected and imported into Mimics 17.0 three-dimensional reconstruction software.Geo-magic Studio 12.0,Solidworks 2017 and Ansys Workbench 17.0 software were used for the construction of the finite element model of cervical vertebrae(C3-6)including intervertebral disc and articular cartilage.The lower end plate of the C5 vertebral body was fixed.A uniformly distributed vertical downward 50 N load was applied on the upper surface of the upper vertebral body(C3).The stress,deformation and deformation direction of the C4-5 intervertebral disc,joint capsule stress,the displacement of facet joints and the area of bilateral intervertebral foramen were compared between sagittal cervical manipulation and traditional rotation reduction. RESULTS AND CONCLUSION:(1)When using the rotation technique,the maximum normal equivalent stress(von Mises stress)of the C4-5 disc was 8.06 MPa;the total deformation was 1.05 mm,and the fiber ring expanded to the left and outside.When using the sagittal tip lifting technique,the maximum normal equivalent stress(von Mises stress)of the C4-5 disc was 2.60 MPa;the total deformation was 0.90 mm,and the fiber ring expanded to the left and back.Compared with the rotation technique,the pressure of the cervical manipulation technique on the disc was less(about 32.3%of the rotation technique),and the deformation degree of the disc was also light(about 85.7%of the rotation technique).(2)When the rotation technique was used,the maximum stresses of the left and right articular capsule ligaments were 0.37 MPa and 1.69 MPa,respectively.The overall displacement of the facet joint was 2.21 mm.The area of the right intervertebral foramen decreased by about 3.8%and the area of the left intervertebral foramen increased by about 0.9%.When the sagittal end lifting manipulation was performed,the maximum stresses of the left and right articular capsule ligaments were 0.27 MPa and 1.70 MPa,respectively;the overall displacement of the facet joint was 1.63 mm;the area of the right intervertebral foramen increased by about 2.6%,and the area of the left intervertebral foramen decreased by about 0.9%.Compared with rotation manipulation,sagittal end lifting manipulation had fewer changes in the displacement of facet joint,joint capsule stress and intervertebral foramen area,so it was safer to operate.(3)In conclusion,compared with cervical rotation manipulation,sagittal end lifting manipulation has fewer changes in facet joint displacement,intervertebral disc stress/deformation degree,joint capsule stress,and foraminal area.In clinical practice,more appropriate manipulation should be selected based on biomechanical results after an accurate assessment of patients'conditions.

Objective:To investigate the clinical significance of intraoperative prepositioning of dual mediastinal drains in elderly patients developing anastomotic leakage(AL)after a total endoscopic Ivor-Lewis procedure.Methods:This retrospective case-control study analyzed the clinical data of 500 elderly patients who underwent total endoscopic Ivor-Lewis surgery for esophageal or cardia cancer from January 2020 to December 2022.In the control group, one mediastinal drainage tube was placed intraoperatively, while in the study group, two mediastinal drainage tubes were placed.Both groups had a chest tube placed conventionally.The study compared the incidence of anastomotic leak(AL)at 1 month postoperatively, inflammatory indexes in patients with AL, grading of AL, rate of nasal fistula placement, incision infection, anastomotic stenosis, and incidence of hoarseness.Additionally, it compared ICU occupancy, ventilator use, and ICU length of stay between the two groups.Results:The analysis included clinical data from 455 elderly patients.Among the patients who developed AL, the study group had significantly lower peak body temperature[(39.58±1.03)℃ vs.(38.05±0.56)℃, t=4.298, P<0.05], white blood cell count[(18.63±3.35)×10 9/L vs.(14.28±2.78)×10 9/L, t=3.450, P<0.05], and C-reactive protein(CRP)levels[(154.66±41.64)mg/L vs.(122.19±31.29)mg/L, t=2.131, P<0.05]. The study group also had a significantly lower grading of AL and rate of nasal fistula placement(82.4% vs.30.0%, P<0.05). In terms of ICU indicators, the study group had a significantly lower ICU admission rate(64.7% vs.10.0%, P<0.05), shorter period of ventilator use[(6.47±8.15)days vs.(0.90±2.23)days, t=2.62, P<0.05], and shorter ICU stay[(11.70±8.89)days vs.(4.70±6.27)days, t=2.184, P<0.05]. Conclusions:Double mediastinal drainage tubes, have been found to significantly alleviate inflammation, decrease the rate of nasal fistula placement and ICU admission, and shorten the length of ICU stay in elderly patients.Therefore, they are considered safe and deserving of clinical promotion.

Objective:To compare the clinical efficacy of ileocecal-preserving laparoscopic subtotal colectomy, antegrade peristaltic ascending colorectal anastomosis with antiperistalsis cecorectal anastomosis in the treatment of severe slow transit constipation.Methods:The clinical data of 42 patients with severe slow transit constipation undergoing surgery in Shulan (Hangzhou) Hospital from Jan 2016 to Oct 2021 were retrospectively analyzed. All 42 patients underwent ileocecal-preserving laparoscopic subtotal colectomy. Among them, 25 patients underwent antegrade peristaltic anastomosis of ascending colon and rectum, 17 patients underwent antiperistaltic anastomosis of cecum and rectum.Results:There was no significant difference in the operation time and hospitalization time between the two groups ( t=-0.464, P=0.645; t=0.010, P=0.992); Wexner constipation scores in both groups were significantly reduced at 6 and 12 months after surgery. There was no significant difference in the Wexner constipation scores ( t=-1.181, P=0.240; t=-1.717, P=0.090), the number of bowel movenents per day ( t=0.179, P=0.860; t=0.545, P=0.590) and stool shapes scores ( t=-0.316, P=0.750; t=0.447, P=0.660) between the two groups at 6 and 12 months after surgery. Gastrointestinal quality of life index scores in the antegrade peristaltic anastomosis group were significantly higher than those in the antiperistalsis anastomosis group at 6 and 12 months after surgery ( t=4.329, P<0.05; t=3.988, P<0.05), while abdominal pain scores were significantly lower than those in the antiperistalsis anastomosis group ( t=-4.386, P<0.05; t=-5.740, P<0.05). Conclusions:For patients with severe slow transit constipation, ileocecal-preserving laparoscopic subtotal colectomy has good surgical safety and near-to-medium-term clinical efficacy, whether it is antegrade peristaltic ascending colorectal anastomosis (the stump of the ascending colon is turned from front to back) or antiperistalsis cecorectal anastomosis. The antegrade peristaltic ascending colorectal anastomosis has lower abdominal pain score and better gastrointestinal quality of life than antiperistalsis cecorectal anastomosis, which should be recommended first. During the operation, the ileocolic mesentery should be fully separated to the root of mesentery and the ileocecal part should be turned from front to back to avoid the occurrence of mesenteric vascular torsion and small intestinal obstruction.