ObjectiveTo learn the density and seasonal variation of adult mosquitoes in Pudong New Area of Shanghai, and to explore the influence of meteorological factors on the density of adult mosquitoes. MethodsFrom April to November in 2017‒2021, adult mosquito density in Pudong New Area was monitored every ten days a time by using CO₂ trapping light method. Meteorological data were collected during the same time, and Pearson correlation analysis and multiple linear regression model were used to investigate the correlation between adult mosquito density and meteorological factors. ResultsThe seasonal variation of adult mosquito density showed a single-peak pattern, with the peak of 7.09 mosquitoes·(set·time)^-1 in July. The adult mosquito density was positively correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, and monthly average relative humidity (r=0.813, 0.793, 0.820, 0.617, all P<0.05), but negatively correlated with monthly average air pressure (r=-0.738, P<0.05). The regression equation of the adult mosquito density and monthly minimum temperature in Pudong New Area of Shanghai was Y=0.066 X₃-0.884, with a corrected R² of 0.673, indicating a good model fitting. ConclusionThe overall seasonal variation of adult mosquito density in Pudong New Area showed a single-peak pattern. The density of adult mosquitoes was correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, monthly average relative humidity, and monthly average air pressure, and linearly correlated with monthly minimum temperature.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo analyze the expression level of triggering receptor expressed on myeloid cells-1 （TREM-1） in serum and ascites of patients with cirrhotic ascites， and to investigate its correlation with clinical features and inflammatory markers and its role in the diagnosis of infection and prognostic evaluation. MethodsA total of 110 patients with cirrhotic ascites who were hospitalized in The Fifth Hospital of Shijiazhuang from January 2019 to December 2020 were enrolled， and according to the presence or absence of intra-abdominal infection， they were divided into infection group with 72 patients and non-infection group with 38 patients. The patients with infection were further divided into improvement group with 38 patients and non-improvement group with 34 patients. Clinical data and laboratory markers were collected from all patients. Serum and ascites samples were collected， and ELISA was used to measure the level of TREM-1. The independent-samples t test was used for comparison of normally distributed continuous data between two groups； the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups， and the Kruskal-Wallis H test was used for comparison between multiple groups； the chi-square test was used for comparison of categorical data between two groups. A Spearman correlation analysis was used to investigate the correlation between indicators. A multivariate Logistic regression analysis was used to identify the influencing factors for the prognosis of patients with cirrhotic ascites and infection. The receiver operating characteristic （ROC） curve was used to evaluate the diagnostic and prognostic efficacy of each indicator， and the Delong test was used for comparison of the area under the ROC curve （AUC）. ResultsThe level of TREM-1 in ascites was significantly positively correlated with that in serum （r=0.50， P<0.001）. Compared with the improvement group， the non-improvement group had a significantly higher level of TREM-1 in ascites （Z=-2.391， P=0.017） and serum （Z=-2.544， P=0.011）， and compared with the non-infection group， the infection group had a significantly higher level of TREM-1 in ascites （Z=-3.420， P<0.001）， while there was no significant difference in the level of TREM-1 in serum between the two groups （P>0.05）. The level of TREM-1 in serum and ascites were significantly positively correlated with C-reactive protein （CRP）， procalcitonin （PCT）， white blood cell count， and neutrophil-lymphocyte ratio （r=0.288， 0.344， 0.530， 0.510， 0.534， 0.454， 0.330， and 0.404， all P<0.05）. The ROC curve analysis showed that when PCT， CRP， and serum or ascitic TREM-1 were used in combination for the diagnosis of cirrhotic ascites with infection， the AUCs were 0.715 and 0.740， respectively. The multivariate Logistic regression analysis showed that CRP （odds ratio ［OR］=1.019， 95% confidence interval ［CI］： 1.001‍ ‍—‍ ‍1.038， P=0.043） and serum TREM-1 （OR=1.002， 95%CI： 1.000‍ ‍—‍ ‍1.003， P=0.016） were independent risk factors for the prognosis of patients with cirrhotic ascites and infection， and the combination of these two indicators had an AUC of 0.728 in predicting poor prognosis. ConclusionThe level of TREM-1 is closely associated with the severity of infection and prognosis in patients with cirrhotic ascites， and combined measurement of TREM-1 and CRP/PCT can improve the diagnostic accuracy of infection and provide support for prognostic evaluation.

Humans ; Vascular Stiffness ; Coal Mining ; Occupational Diseases/epidemiology* ; Risk Factors ; Coal ; Miners

Humans ; PPAR gamma/metabolism* ; Multiple Sclerosis ; Transcription Factors/metabolism* ; Peroxisome Proliferator-Activated Receptor Gamma Coactivator 1-alpha

Objective To compare the safety and efficacy of the da Vinci robot and thoracoscopic subxiphoid approach for the treatment of anterior mediastinal tumors. Methods The clinical data of patients who underwent anterior mediastinal tumor resection through the subxiphoid approach admitted to the same medical group in the Department of Thoracic Surgery of the First Hospital of Lanzhou University between June 2020 and April 2022 were retrospectively analyzed. According to the surgery approach, the patients were divided into a robot-assisted thoracoscopic surgery (RATS) group and a video-assisted thoracoscopic surgery (VATS) group. The perioperative data and the incidence of postoperative complications were compared between the two groups. Results A total of 79 patients were enrolled. There were 41 patients in the RATS group, including 13 males and 28 females, with an average age of 45.61±14.99 years. There were 38 patients in the VATS group, including 14 males and 24 females, with an average age of 47.84±15.05 years. All patients completed the surgery successfully. Hospitalization cost and operative time were higher or longer in the RATS group than those in the VATS group, and the difference was statistically significant (P<0.05). Intraoperative bleeding, postoperative hospital stay, postoperative water and food intake time, postoperative off-bed activity time, white blood cell count, neutrophil percentage and visual analogue scale (VAS) score on the first postoperative day, white blood cell count and neutrophil percentage on the third postoperative day, duration of analgesic pump use, the number of voluntary compressions of the analgesic pump, and mediastinal drainage volume were all superior to those in the VATS group (P<0.05). The differences in VAS scores on the third postoperative day, duration of drainage tube retention and postoperative complication rates were not statistically different between the two groups (P>0.05). Conclusion RATS subxiphoid anterior mediastinum tumor resection is a safe and feasible surgical method with less injury and higher safety, which is conducive to rapid postoperative recovery and has wide clinical application prospects.

Inflammatory pseudotumor-like follicular dendritic cell sarcoma(IPT-like FDCS)is a very rare malignant tumor that is considered to be associated with Epstein-Barr virus.Two patients in this report were generally healthy,and the spleen tumor was found during physical examination.After completing the examination,laparoscopic total splenectomy was performed,and the pathological result showed IPT-like FDCS.Postoperative chemoradiotherapy was not performed in either case.The disease has no characteristic clinical manifestations,and imaging overlaps with sarcoma.Microscopic manifestation showed CD21,CD23 and EBER positive spindle tumor cells in the inflammatory background with matted arrangement.Due to the interwoven distribution of tumor cells and lymphocytes,diagnosis is difficult.In this article,we report this two cases with literature review and summarize their clinical and pathological features to improve diagnostic cognition.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

Objective:To explore the role of combined detection of cell free BMPR1A and PLAC8 gene methylation in plasma in predicting postoperative recurrence of hepatocellular carcinoma.Methods:Case series study. Patients with stage Ⅰ-Ⅳ hepatocellular carcinoma who were treated at the Third Affiliated Hospital of Sun-Yat-sen University from January 2022 to July 2023 were selected. All enrolled patients underwent alpha fetoprotein (AFP) and imaging assessments 1 month, 3 months, 6 months, 9 months, and 12 months after treatment. Simultaneously, peripheral blood of patients was extracted for plasma circulating tumor DNA (ctDNA) methylation detection, and the results of free BMPR1A and PLAC8 gene methylation detection in patients′ plasma after treatment were compared with the positive rate of traditional tumor marker AFP detection. Draw the receiver operating characteristic curve (ROC) of the subjects to demonstrate the effectiveness of this method in predicting the recurrence of hepatocellular carcinoma. Based on the results of cell free DNA methylation and whether AFP is more than 7 μg/L, hepatocellular carcinoma patients were divided into high-risk methylation group (12 cases), low-risk methylation group (21 cases), high-risk AFP group (15 cases), and Kaplan Meier survival analysis was performed on them.Results:The sensitivity and specificity of combined detection of free BMPR1A PLAC8 gene methylation in plasma for predicting liver cancer recurrence were 66.7% and 88.9%, respectively. The area under curve (AUC) of BMPR1A PLAC8 gene methylation detection for liver cancer recurrence were 0.770 and 0.778, and the AFP was 0.522 in ROC curve analysis. Compared to imaging examinations, cell free DNA methylation detection can detect the recurrence of hepatocellular carcinoma on average by 58.3 days in advance(53.8 days vs 112.1 days). The progression free survival rate of the high-risk group based on free DNA methylation prediction at 400 days was 22.2%, significantly lower than the low-risk group (76.2%, P<0.001). Conclusion:Compared to AFP, detecting the methylation of BMPR1A and PLAC8 genes can predict the recurrence of hepatocellular carcinoma more accurately, making it a practical method for monitoring liver cancer recurrence.