OBJECTIVE: To investigate the correlation between ¹⁸Fluoro-deoxyglucose positron emission tomography/computed tomography (¹⁸F-FDG PET/CT) metabolic parameters and peripheral blood circulating tumour DNA (ctDNA) in patients with diffuse large B-cell lymphoma (DLBCL), and the prognostic value of these two types of parameters in predicting progression-free survival (PFS). METHODS: Clinical, PET/CT and ctDNA data of DLBCL patients who underwent peripheral blood ctDNA testing and corresponding PET/CT scans during the same period were retrospectively analyzed. At the time of ctDNA sampling and PET scan, patients were divided into baseline and relapsed/refractory (R/R) groups according to different disease conditions. CtDNA mutation abundance was expressed as variant allele frequency (VAF), including maximum VAF (maxVAF) and mean VAF (meanVAF). Total metabolic tumour volume (TMTV) and total lesion glycolysis (TLG) were obtained by the 41% maximum normalized uptake value method, and the distance between the two farthest lesions (Dmax) was used to assess the correlation between PET parameters and ctDNA mutation abundance using Spearman correlation analysis. The receiver operating characteristic (ROC) curves were used to obtain the optical cut-off values of those parameters in predicting PFS in the baseline and R/R groups, respectively. Survival curves were outlined using the Kaplan-Meier method and log-rank test was performed to compare survival differences. RESULTS: A total of 67 DLBCL patients ［28 males and 39 females, median age 56.0(46.0, 67.0) years］ were included and divided into baseline group (29 cases) and R/R group (38 cases). Among these PET parameters, baseline TMTV, TLG, and Dmax were significantly correlated with baseline ctDNA mutation abundance, except for maximum standardized uptake value (SUVmax) (maxVAF vs TMTV: r=0.711; maxVAF vs TLG: r=0.709; maxVAF vs Dmax: r=0.672; meanVAF vs TMTV: r=0.682; meanVAF vs TLG: r=0.677; meanVAF vs Dmax: r=0.646). While in all patients, these correlations became weaker significantly. Among R/R patients, only TMTV had a weak correlation with meanVAF (r=0.376). ROC analysis showed that, the specificity of TMTV, TLG and Dmax in predicting PFS was better than mutation abundance, while the sensitivity of ctDNA mutation abundance was better. Except R/R patients, TMTV, TLG, Dmax, and VAF were significantly different at normal/elevated lactate dehydrogenase in baseline group and all patients (all P<0.05). Survival curves indicated that high TMTV (>109.5 cm³), high TLG (>2 141.3), high Dmax (>33.1 cm) and high VAF (maxVAF>7.74%, meanVAF>4.39%) were risk factors for poor PFS in baseline patients, while only high VAF in R/R patients (both maxVAF and meanVAF >0.61%) was a risk factor for PFS. CONCLUSION PET-derived parameters correlate well with ctDNA mutation abundance, especially in baseline patients. VAF of ctDNA predicts PFS more sensitively than PET metabolic parameters, while PET metabolic tumour burden with better specificity. TMTV, TLG and VAF all have good prognostic value for PFS. PET/CT combined with ctDNA has potential for further studies in prognostic assessment and personalized treatment.
Male ; Female ; Humans ; Middle Aged ; Positron Emission Tomography Computed Tomography ; Fluorodeoxyglucose F18 ; Circulating Tumor DNA/genetics* ; Retrospective Studies ; Positron-Emission Tomography ; Survival Analysis ; Lymphoma, Large B-Cell, Diffuse/metabolism* ; Prognosis

Humans ; Burkitt Lymphoma/therapy* ; Hematopoietic Stem Cell Transplantation ; HIV Infections/complications*

Objective:To explore the application of three-dimensional measurement data in the diagnosis and treatment of mandibular angle prominent in Shanghai female youth.Methods:The young females in Shanghai were selected from the Clinical Database of Shanghai Universal Medical Imaging Diagnostic Center in Xuhui and the Second Affiliated Hospital of Naval Medical University from January 2010 to December 2020. Three-dimensional reconstruction of the craniofacial region was performed using computer-aided technology, and the subjects were divided into prominent group, attractive group, and contrast group according to the three-dimensional reconstruction images and doctor’s evaluation results. The mandibular and facial regions of the three groups were measured in three dimensions. The measurement indicators included bone tissue indicators such as mandibular angle (∠Co-Go-Me), mandibular expansion angle (∠Go-Me-Go), mandibular body length/mandibular support height ratio (Go-Me/Co-Go), mandibular angle width/zygomatic width ratio (Go-Go/Zy-Zy), and mandibular width index (Go-Go/Co-Co); and the soft tissue indicators included mandibular angle (∠t-go’-gn), mandibular angle width/midface width ratio (go’-go’/zy’-zy’), and mandibular angle width/mandibular height ratio (go’-go’/s-gn). The data were analyzed using SPSS 18.0 software, with normally distributed metric data expressed as Mean±SD. One-way analysis of variance or Kruskal-Wallis rank sum test was used to compare the three groups, and LSD method was used for comparison among prominent group, contrast group and attractive group. Fisher discriminant analysis was used for indicators with statistical significance. P<0.05 was considered statistically significant. Results:A total of 200 young females in Shanghai were enrolled in this study. 73 cases were included in the prominent group, with an age of (26.1±3.2) years, body weight of (54.3±4.3) kg, and body mass index(BMI) of (21.3±1.9) kg/m 2; 32 cases in the attractive group, with an age of (25.3±3.1) years, body weight of (58.7±3.7) kg, and BMI of (20.0±1.5) kg/m 2; and 95 cases in the contrast group, with an age of (27.2±3.7) years, body weight of (53.3±3.4) kg, and BMI of (20.1±1.3) kg/m 2. There were no significant differences in age, body weight, and BMI among the three groups ( P>0.05). There were significant differences in the measurement values of indicators such as ∠Co-Go-Me, ∠Go-Me-Go, Go-Me/Co-Go, Go-Go/Co-Co, ∠t-go’-gn among the three groups ( P<0.01). The prominent group showed significant outward and posterior protrusion in the mandibular angle area compared with the contrast group in terms of ∠Co-Go-Me (111.69°±4.19° vs. 115.43°±3.01°), ∠Go-Me-Go (66.27°±4.51° vs. 64.19°±3.69°), and ∠t-go’-gn (126.13°±7.51° vs. 130.34°±7.21°) ( P<0.01). The attractive group showed significant differences compared with the contrast group in terms of ∠Co-Go-Me (121.61°±3.22° vs. 115.43°±3.01°), Go-Me/Co-Go (1.67±0.20 vs. 1.58±0.15), and ∠t-go’-gn (137.17°±7.57° vs. 130.34°±7.21°) ( P<0.01). The lower quartile of ∠Co-Go-Me in the prominent group was 110°, and the upper quartile of ∠GO-Me-Go was 72°, with a small overlap in the mode region compared with the other two groups. Three indicators, ∠Co-Go-Me ( D1), ∠Go-Me-Go ( D2), and Go-Me/Co-Go ( D3), were selected to establish Fisher discriminant functions. The Fisher discriminant function for prominent group was Z=0.237 D2-0.084 D1-5.813, with a discriminant rate of 60.3%, and for the attractive group was Z=0.257 D1-0.015 D3-28.610, with a Fisher discriminant rate of 85.3%. Conclusion:The ∠Co-Go-Me, ∠Go-Me-Go, ∠t-go’-gn, and other data in Shanghai female youth can be used to evaluate their mandibular contour morphology, providing a reference for the diagnosis and treatment of mandibular angle prominent. The ∠Co-Go-Me of the mandibular aesthetic group should approach 122°, and ∠Co-Go-Me<110° and ∠Go-Me-Go>72° can be used as preliminary indicators for the diagnosis of mandibular angle prominent in prominent group, guiding clinical practice.

Objective:To use the least square method to curve fit the mandibular contours of Chinese women, obtain an ideal fitting function model, and explore the effectiveness of using mathematical curves for bone cutting line design in mandibular osteotomy.Methods:(1) Female cranial CT data were selected from the Second Affiliated Hospital of Naval Medical University and Shanghai Universal Medical Imaging Diagnostic Center. The mandibular morphology of the CT reconstructed images was evaluated using the Likert scale, and samples were selected from individuals with mandibular angle hypertrophy, aesthetically pleasing mandibular morphology, and aesthetically pleasing appearance after osteotomy as references. The Python platform Spyder module was used to analyze the curve fitting of mandibular contour morphology and the goodness of fitting was measured by the coefficient of determination R2( R2 ≥ 0.800 was considered acceptable for the fitted function, while R2≥ 0.900 was deemed sufficient to meet clinical application requirements). The fitting degree of polynomial functions, logarithmic functions, and other mathematical curves in the facial contours of individuals with aesthetically pleasing mandibular morphology were analyzed to obtain an ideal mandibular contour curve fitting function model. (2) Patients with mandibular angle hypertrophy who underwent intraoral mandibular osteotomy from March 2020 to March 2021 at the Department of Plastic and Reconstructive Surgery of Second Affiliated Hospital of Naval Medical University were divided into a mathematical template group (guided by a mathematical curve-based bone cutting plan), a traditional template group (guided by traditional bone cutting templates), and a manual osteotomy group. Three-dimensional reconstruction technology was used to evaluate the efficacy postoperatively. Preoperative preparation time, bone cutting time, surgical time, and postoperative complications were compared among the three groups. Patient self-evaluation of surgical outcomes was assessed using the jawline component of the Face-Q questionnaire. Results:(1) A total of 205 female cranial CT data were selected, including 73 cases of mandibular angle hypertrophy, 32 cases of aesthetically pleasing mandibular morphology, and 5 cases of aesthetically pleasing appearance after osteotomy as reference samples for mandibular contour curve fitting. The result showed that the third-degree polynomial function ( R2=0.918±0.027) and logarithmic function ( R2=0.930±0.039) could be used to simulate the mandibular contour morphology in individuals with aesthetically pleasing mandibular morphology. (2) The mathematical template group (using logarithmic function for bone cutting design), traditional template group, and manual osteotomy group included 28, 14, and 11 patients with mandibular angle hypertrophy, respectively. All patients were satisfied with the postoperative mandibular contour morphology and no complications such as deformity or significant asymmetry were observed. The mathematical template group outperformed the manual osteotomy group in terms of the total score of the jawline questionnaire, surgical time, and bone cutting time(all P<0.01). The preoperative preparation time in the mathematical template group was shorter than that in the traditional template group [(82.39±9.77) min vs. (97.07±17.49) min, P<0.01], and the jawline questionnaire evaluation showed that the patients in the mathematical template group had higher scores in evaluating the lateral view of the mandible and the smoothness of the lower facial contour compared to the traditional template group [3.75±0.44 vs. 3.14±0.36, 3.71±0.46 vs. 3.36±0.50, both P<0.05]. Conclusion:Curve fitting based on the least square method can be used to simulate mandibular angle osteotomy. Models such as logarithmic functions can be used for preoperative design of mandibular osteotomy and have advantages in terms of contour smoothness and symmetry after surgery. Bone cutting design based on mathematical curves can meet patient demands and aesthetic standards, providing precise and individualized solutions for surgery.

Objective:To explore the psychological status of female patients with mandibular angle hypertrophy before and after receiving mandibular angle osteotomy (MAO) using psychological measurement methods.Methods:The study included 36 female patients (age ranged 18-35 years, with mean age of 23 years) who underwent bilateral mandibular angle osteotomy at the Department of Burns and Plastic Surgery, Naval Medical University. Symptom Checklist-90 (SCL-90), Self-Rating Anxiety Scale (SAS), and Self-Rating Depression Scale (SDS) were used to assess the patients′ psychological status before and after surgery. SPSS 18.0 was used to compare the preoperative and postoperative data with the national norms.Results:According to the SCL-90 questionnaire, the scores of the six factors, including obsessive-compulsive symptoms (2.24±0.43 vs. 1.62±0.58, P<0.01), interpersonal sensitivity (1.85±0.46 vs. 1.65±0.61, P=0.02), depression (1.91±0.43 vs. 1.50±0.59, P<0.01), anxiety (1.75±0.42 vs. 1.39±0.43, P<0.01), hostility (1.86±0.45 vs. 1.46±0.55, P<0.01), and paranoia (2.18±0.46 vs. 1.43±0.57, P<0.01) of patients before surgery were significantly higher than the national norms. One month after surgery, there was a significant improvement in SAS and SDS scores compared to preoperative scores ( t=8.0, 10.4, P<0.01). The SAS score decreased from 43.0±9.8 to 37.5±6.8, and the SDS score decreased from 47.1±10.6 to 39.4±7.5. There was no statistically significant difference in the depression and anxiety indices of SCL-90 compared to the national norms ( P>0.05). Conclusions:Mandibular angle osteotomy significantly improves the psychological health of female patients with mandibular angle hypertrophy and can alleviate the symptoms of anxiety and depression.

Objective:To explore the application of three-dimensional measurement data in the diagnosis and treatment of mandibular angle prominent in Shanghai female youth.Methods:The young females in Shanghai were selected from the Clinical Database of Shanghai Universal Medical Imaging Diagnostic Center in Xuhui and the Second Affiliated Hospital of Naval Medical University from January 2010 to December 2020. Three-dimensional reconstruction of the craniofacial region was performed using computer-aided technology, and the subjects were divided into prominent group, attractive group, and contrast group according to the three-dimensional reconstruction images and doctor’s evaluation results. The mandibular and facial regions of the three groups were measured in three dimensions. The measurement indicators included bone tissue indicators such as mandibular angle (∠Co-Go-Me), mandibular expansion angle (∠Go-Me-Go), mandibular body length/mandibular support height ratio (Go-Me/Co-Go), mandibular angle width/zygomatic width ratio (Go-Go/Zy-Zy), and mandibular width index (Go-Go/Co-Co); and the soft tissue indicators included mandibular angle (∠t-go’-gn), mandibular angle width/midface width ratio (go’-go’/zy’-zy’), and mandibular angle width/mandibular height ratio (go’-go’/s-gn). The data were analyzed using SPSS 18.0 software, with normally distributed metric data expressed as Mean±SD. One-way analysis of variance or Kruskal-Wallis rank sum test was used to compare the three groups, and LSD method was used for comparison among prominent group, contrast group and attractive group. Fisher discriminant analysis was used for indicators with statistical significance. P<0.05 was considered statistically significant. Results:A total of 200 young females in Shanghai were enrolled in this study. 73 cases were included in the prominent group, with an age of (26.1±3.2) years, body weight of (54.3±4.3) kg, and body mass index(BMI) of (21.3±1.9) kg/m 2; 32 cases in the attractive group, with an age of (25.3±3.1) years, body weight of (58.7±3.7) kg, and BMI of (20.0±1.5) kg/m 2; and 95 cases in the contrast group, with an age of (27.2±3.7) years, body weight of (53.3±3.4) kg, and BMI of (20.1±1.3) kg/m 2. There were no significant differences in age, body weight, and BMI among the three groups ( P>0.05). There were significant differences in the measurement values of indicators such as ∠Co-Go-Me, ∠Go-Me-Go, Go-Me/Co-Go, Go-Go/Co-Co, ∠t-go’-gn among the three groups ( P<0.01). The prominent group showed significant outward and posterior protrusion in the mandibular angle area compared with the contrast group in terms of ∠Co-Go-Me (111.69°±4.19° vs. 115.43°±3.01°), ∠Go-Me-Go (66.27°±4.51° vs. 64.19°±3.69°), and ∠t-go’-gn (126.13°±7.51° vs. 130.34°±7.21°) ( P<0.01). The attractive group showed significant differences compared with the contrast group in terms of ∠Co-Go-Me (121.61°±3.22° vs. 115.43°±3.01°), Go-Me/Co-Go (1.67±0.20 vs. 1.58±0.15), and ∠t-go’-gn (137.17°±7.57° vs. 130.34°±7.21°) ( P<0.01). The lower quartile of ∠Co-Go-Me in the prominent group was 110°, and the upper quartile of ∠GO-Me-Go was 72°, with a small overlap in the mode region compared with the other two groups. Three indicators, ∠Co-Go-Me ( D1), ∠Go-Me-Go ( D2), and Go-Me/Co-Go ( D3), were selected to establish Fisher discriminant functions. The Fisher discriminant function for prominent group was Z=0.237 D2-0.084 D1-5.813, with a discriminant rate of 60.3%, and for the attractive group was Z=0.257 D1-0.015 D3-28.610, with a Fisher discriminant rate of 85.3%. Conclusion:The ∠Co-Go-Me, ∠Go-Me-Go, ∠t-go’-gn, and other data in Shanghai female youth can be used to evaluate their mandibular contour morphology, providing a reference for the diagnosis and treatment of mandibular angle prominent. The ∠Co-Go-Me of the mandibular aesthetic group should approach 122°, and ∠Co-Go-Me<110° and ∠Go-Me-Go>72° can be used as preliminary indicators for the diagnosis of mandibular angle prominent in prominent group, guiding clinical practice.

Objective:To use the least square method to curve fit the mandibular contours of Chinese women, obtain an ideal fitting function model, and explore the effectiveness of using mathematical curves for bone cutting line design in mandibular osteotomy.Methods:(1) Female cranial CT data were selected from the Second Affiliated Hospital of Naval Medical University and Shanghai Universal Medical Imaging Diagnostic Center. The mandibular morphology of the CT reconstructed images was evaluated using the Likert scale, and samples were selected from individuals with mandibular angle hypertrophy, aesthetically pleasing mandibular morphology, and aesthetically pleasing appearance after osteotomy as references. The Python platform Spyder module was used to analyze the curve fitting of mandibular contour morphology and the goodness of fitting was measured by the coefficient of determination R2( R2 ≥ 0.800 was considered acceptable for the fitted function, while R2≥ 0.900 was deemed sufficient to meet clinical application requirements). The fitting degree of polynomial functions, logarithmic functions, and other mathematical curves in the facial contours of individuals with aesthetically pleasing mandibular morphology were analyzed to obtain an ideal mandibular contour curve fitting function model. (2) Patients with mandibular angle hypertrophy who underwent intraoral mandibular osteotomy from March 2020 to March 2021 at the Department of Plastic and Reconstructive Surgery of Second Affiliated Hospital of Naval Medical University were divided into a mathematical template group (guided by a mathematical curve-based bone cutting plan), a traditional template group (guided by traditional bone cutting templates), and a manual osteotomy group. Three-dimensional reconstruction technology was used to evaluate the efficacy postoperatively. Preoperative preparation time, bone cutting time, surgical time, and postoperative complications were compared among the three groups. Patient self-evaluation of surgical outcomes was assessed using the jawline component of the Face-Q questionnaire. Results:(1) A total of 205 female cranial CT data were selected, including 73 cases of mandibular angle hypertrophy, 32 cases of aesthetically pleasing mandibular morphology, and 5 cases of aesthetically pleasing appearance after osteotomy as reference samples for mandibular contour curve fitting. The result showed that the third-degree polynomial function ( R2=0.918±0.027) and logarithmic function ( R2=0.930±0.039) could be used to simulate the mandibular contour morphology in individuals with aesthetically pleasing mandibular morphology. (2) The mathematical template group (using logarithmic function for bone cutting design), traditional template group, and manual osteotomy group included 28, 14, and 11 patients with mandibular angle hypertrophy, respectively. All patients were satisfied with the postoperative mandibular contour morphology and no complications such as deformity or significant asymmetry were observed. The mathematical template group outperformed the manual osteotomy group in terms of the total score of the jawline questionnaire, surgical time, and bone cutting time(all P<0.01). The preoperative preparation time in the mathematical template group was shorter than that in the traditional template group [(82.39±9.77) min vs. (97.07±17.49) min, P<0.01], and the jawline questionnaire evaluation showed that the patients in the mathematical template group had higher scores in evaluating the lateral view of the mandible and the smoothness of the lower facial contour compared to the traditional template group [3.75±0.44 vs. 3.14±0.36, 3.71±0.46 vs. 3.36±0.50, both P<0.05]. Conclusion:Curve fitting based on the least square method can be used to simulate mandibular angle osteotomy. Models such as logarithmic functions can be used for preoperative design of mandibular osteotomy and have advantages in terms of contour smoothness and symmetry after surgery. Bone cutting design based on mathematical curves can meet patient demands and aesthetic standards, providing precise and individualized solutions for surgery.

Wound repair is a common clinical problem, which seriously affects the quality of life of patients and also brings a heavy burden to the society. Hydrogel-based multifunctional dressing has shown strong potential in the treatment of acute and chronic wounds. In addition to its good histocompatibility, cell adhesion, and biodegradability, methacrylic anhydride gelatin (GelMA) hydrogel has also attracted much attention due to its low cost, mild reaction conditions, adjustable physicochemical properties, and wide clinical applications. In this paper, the characteristics of GelMA hydrogel and its research progress in wound repair are introduced, and the future development of multifunctional GelMA hydrogel dressing for wound treatment is prospected.
Humans ; Gelatin/chemistry* ; Hydrogels ; Anhydrides ; Quality of Life ; Methacrylates/chemistry*

Objective: To evaluate the impact of KIT D816 mutation on the salvage therapy in relapsed acute myeloid leukemia (AML) with t(8;21) translocation. Method: The characteristics of the first relapsed AML with t(8;21) translocation from 10 hospitals were retrospectively collected, complete remission (CR(2)) rate after one course salvage chemotherapy and the relationship between KIT mutation and CR(2) rate was analyzed. Results: 68 cases were enrolled in this study, and 30 cases (44.1%) achieved CR(2). All patients received KIT mutation detection, and KIT D816 mutation was identified in 26 cases. The KIT D816 positive group had significantly lower CR(2) compared with non-KIT D816 group (23.1% vs 57.1%, χ(2)=7.559, P=0.006), and patients with longer CR(1) duration achieved significantly higher CR(2) than those with CR(1) duration less than 12 months (74.1% vs 31.9%, χ(2)=9.192, P=0.002). KIT D816 mutation was tightly related to shorter CR(1) duration. No significant difference of 2 years post relapse survival was observed between KIT D816 mutation and non-KIT D816 mutation group. Conclusion: KIT D816 mutation at diagnosis was an adverse factor on the salvage therapy in relapsed AML with t(8;21) translocation, significantly related to shorter CR1 duration, and can be used for prediction of salvage therapy response. KIT D816 mutation could guide the decision-making of salvage therapy in relapsed AML with t(8;21) translocation.
Antineoplastic Combined Chemotherapy Protocols ; Cytarabine ; Humans ; Leukemia, Myeloid, Acute/therapy* ; Prognosis ; Retrospective Studies ; Salvage Therapy

Objective To observe the effect of Q-Switching Nd:YAG treatment in pigmented dermatoses and its influence for melanin metabolism. Methods 114 patients with pigmented dermatoses in our hospital from October 2015 to August 2016 were selected as the study object,and were randomly divided into the control group (57 cases) and the observation group (57 cases).The control group were treated with intense pulsed light therapy while the observation group were treated with Q-Switching Nd:YAG treatment on the treatment of control group. Then the total effective rates,recurrence rates,adverse reaction rates,skin lesion scores and serum melanin metabolism related indexes before and after the treatment of two groups were analyzed and compared. Results Clinically, the total effective rates of observation group were higher than those of control group ( <0.05)and the recurrence rate of observation group was lower than that of control group ( <0.05) .The adverse reaction rates of two groups were compared and the differences were not statistically significant ( >0.05) .The skin lesion scores and serum melanin metabolism related indexes of two groups before the treatment were compared and the differences were not statistically significant (>0.05) .The serum melanin metabolism related indexes of two groups after the treatment were all better than those of control group ( <0.05) . Conclusion The clinical effect of Q-Switching Nd:YAG treatment in the patients with pigmented dermatoses is better, and it has the active influence for the melanin metabolism,so it has higher clinical value in the treatment of pigmented dermatoses.