To address the limitations of traditional minimally invasive thermal ablation technology such as poor conformability, carbonization and electromagnetic radiation, this paper proposes a steam thermal ablation technology that uses saturated steam internal energy to replace the traditional electromagnetic radiation energy. Through the steam thermal ablation system and the steam thermal ablation needle designed based on simulation, the ex vivo pig liver experiments were carried out. The results have the characteristics of the maximum ablation axis ratio (short diameter / long diameter) and non-carbonization with the same type of thermal ablation technology. Based on the near-infrared light, in this paper the curative effect of the reduced scattering coefficient of the steam thermal ablation results was evaluated. The reduced scattering coefficients of the coagulation area all exceeded 16, reaching the completely damaged state, which verified that the steam thermal ablation can effectively inactivate the tumor cells.
Steam ; Animals ; Swine ; Liver Neoplasms/surgery* ; Ablation Techniques/methods* ; Liver/surgery* ; Equipment Design

The minimally invasive thermal ablation technology differs from traditional surgical operations, which requires auxiliary equipment to evaluate ablation results. However, the ultrasound and CT currently used in clinical practice have shortcomings such as artifacts and radiation. Therefore, this paper proposes a design for a minimally invasive thermal ablation evaluation system based on the principle of electrical impedance tomography technology to monitor the ablation range. At the same time, the innovative introduction of a programmable gain feedforward signal as the parameter signal of the multiplier demodulator in the electrical impedance tomography system design can effectively solve the problem of weak signals being submerged in noise and improve imaging accuracy. The system controls the amplitude of the excitation current signal and the acquisition / processing of boundary voltages via an STM32, uploads the collected data to an upper computer, and reconstructs the conductivity distribution using the Newton-Raphson algorithm to map the size of the ablation area. Experimental results show that the system can effectively reflect the size of the microwave ablation area. Under the same minimally invasive ablation parameters, the average imaging errors are 0.6 mm for the long diameter, 0.8 mm for the short diameter, and 1.75% for the axial ratio (long diameter / short diameter), demonstrating high consistency. This verifies the technical potential of electrical impedance tomography in minimally invasive thermal ablation.
Electric Impedance ; Tomography/instrumentation* ; Equipment Design

A pulse and respiration synchronous detection system is designed to explore the changes of physiological signals in different situations.The system obtains the corresponding signal through STM32 control pulse and respiratory acquisition circuit,calculates and displays real-time parameters such as heart rate and respiratory rate,and transmits the data to the upper computer for storage in the database.The experimental test results show that the system can monitor pulse and respiratory waveform in different situations,and the waveform is in good condition.Compared with medical pulse oximeter,the error of measured heart rate and blood oxygen concentration is less than 3%,and the error of respiratory rate is less than 5%compared with the actual value,which verifies the accuracy of system signal acquisition.The system is small in size,low in cost,and comfortable to wear,and can be applied in experimental research related to pulse and respiratory signals.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.

In this study, a surface electromyography (sEMG) and blood oxygen signal real-time monitoring system is designed to explore the changes of physiological signals during muscle fatigue, so as to detect muscle fatigue. The analysis method of sEMG and the principle of blood oxygen detection are respectively introduced, and the system scheme is expounded. The hardware part of the system takes STM32 as the core. Conditioning module composition; blood oxygen signal acquisition is based on near infrared spectroscopy (NIRS), specifically including light source, light source driving, photoelectric conversion, signal conditioning and other modules. The system software part is based on the real-time uC/OS-III software system. The characteristic parameters of sEMG were extracted by isometric contraction local muscle fatigue experiment; the relative changes of oxyhemoglobin (HbO₂) and deoxyhemoglobin (Hb) were calculated in the forearm blocking experiment, thereby verifying that the system collects two signals effectiveness.
Muscle, Skeletal ; Oxygen ; Electromyography ; Muscle Fatigue/physiology* ; Computers

In recent years， neurotoxicity caused by traditional Chinese medicine （TCM） has frequently occurred and has become one of the important factors restricting the development and application of TCM. TCM contains active components and its dosage-effect relationship is the key to determine its pharmacological activity and toxic effects. Among them， the endogenous toxic components include alkaloids， glycosides， diterpenoids， animal and plant toxic proteins and heavy metals， and so on； exogenous toxic components mainly refer to some harmful elements and pesticide residues during the cultivation， processing， transportation and storage of medicinal materials that are not synthesized by themselves. Effect on the processes such as oxidative stress， inflammation， ion exchange， and energy metabolism may be important mechanisms of TCM-induced neurotoxicity. Neural cells， myelin cells， axons and neurotransmitter systems are common targets of TCM-induced neurotoxicity. In the future， we can use modern research methods and big data mining means to establish a safety evaluation mode of “toxic symptoms-poisoning dose-toxic original agent-detoxification scheme” with the basic component group of toxic substances as the core， so as to provide support for development and clinical intervention of neurotoxic traditional Chinese medicine.

In order to obtain comprehensive brain activity information conveniently in real time, this study designs a portable EEG and blood oxygen synchronous acquisition system for real-time monitoring of brain functional activities. The EEG electrodes filter and amplify the detected EEG signals, and send them to the microprocessor via Bluetooth to analyze the EEG data; the photoelectric probe converts the optical signals into electrical signals, which are amplified and separated, filtered, and AD converted, calculates the brain's oxygenation and blood-red protein (ΔHbO
Brain ; Electrodes ; Electroencephalography ; Oxygen

In order to diagnose and evaluate the human spinal lesions through the paravertebral muscles, a paravertebral muscle monitoring system based on surface EMG signals was designed. The system used surface mount electrodes to obtain the surface myoelectric signal (sEMG) of paravertebral muscle. The signal was filtered and amplified by the conditioning circuit. The signal was collected by the microcontroller NRF52832 and was sent to the mobile APP. After the signal was preprocessed by the wavelet threshold denoising algorithm in APP, the time and frequency characteristics of the sEMG signal reflecting the functional state of the muscle were extracted. The calculated characteristic parameters was displayed in real time in the application interface. The experimental results show that the system meets the design requirements in analog signal acquisition, digital processing of signals and calculation of characteristic parameters. The system has certain application value.
Algorithms ; Computers ; Electrodes ; Electromyography ; instrumentation ; Humans ; Monitoring, Physiologic ; Muscle, Skeletal ; Signal Processing, Computer-Assisted

The aim of the development course in university is to expand the multidisciplinary knowledge.The students,who choose development course,are coming from many subjects.Therefore,the design and teaching methods of this course should have their own characteristics.This study introduces the exploration of medical instrument course with defense features and talent training mode.The core ideas of curriculum reform include the following.The course contents should be professionally subdivided,so that all the students from different majors can obtain the knowledge.Teaching methods should be guided by the national defense requirements using lectures and discussions.Multiply assessment modes,such as speech,discussion,paper poster,and creative exhibition,can be used to evaluate the students.The present reforms have been implemented in the reality of course teaching practice.The reform contents in this paper have a great significance to the creation of development courses based on the integration of preponderant disciplines in the university.

Objective To investigate the guiding value of serum procalcitonin (PCT) level in antibiotic treatment of stroke-associated pneumonia (SAP) after spontaneous intracerebral hemorrhage. Methods A total of 120 patients with SAP after acute cerebral hemorrhage were enroled and were randomly divided into either a conventional treatment group ( n=59) or a PCT guided group ( n=61). In accordance w ith the guidelines for the use of antibiotics in China, the conventional treatment group w as treated w ith antibiotics and the course of antibiotics w as determined by the treating physician. The serum PCT of the PCT group w as monitored continuously after using antibiotics for 5 days. When PCT w as < 0.25 μg/L and the body temperature of the patients w as normal, the antibiotics w ere stopped. When PCT w as ≥0.25 μg/L, the antibiotics w ere used continuously. When PCT w as <0.25 μg/L, but stil had a fever, and the antibiotics w ere used continuously til the temperature w as normal. The course of antibiotics, length of hospitalization, and 30-d mortality of both groups w ere compared. At day 90 after treatment, the modified Rankin scale (mRS) w as used to evaluate the neurological outcome. The mRS score 0-2 w as good outcome and >2 w as poor outcome. They were folowed up for 6 months after discharge. A Kaplan-Meier survive curve was use to compare the survival rate of both groups. Results The course of antibiotics ( 8.95 ±2.73 d vs.13.26 ± 4.11 d;t=6.407, P<0.001) and the length of hospitalization ( 15.64 ±2.63 d vs.18.36 ±4.27 d; t=3.967, P<0.001) of the PCT group w ere significantly shorter than those of the conventional treatment group. There w ere no significant differences in the proportions of 30 d mortality ( 9.8%vs.10.1%; χ2 =0.003, P=0.951) and 90 d good outcome ( 60.6%vs.59.3%; χ2 =0.022, P=0.881) betw een the PCT guided group and the conventional treatment group. At the end of the 6-month folow-up period, a total of 13 patients (12.0%) died, including 6 in the conventional treatment group and 7 in the PCT group. The Kaplan-Meier analysis show ed that there w as no significant difference in the 6-month survival rate betw een the 2 groups (χ2 = 0.070, P= 0.791 ). Conclusions Monitoring the serum PCT level for guiding antibiotic treatment of SAP after spontaneous intracerebral hemorrhage is safe, and it may shorten the course of antibiotics and reduce the length of hospitalization.