Objective To explore the clinical characteristics of patients with diffuse large B-cell lymphoma (DLBCL) accompanied with KMT2D gene mutation and the impact of its co-mutated genes on prognosis. Methods Clinical data of 155 newly diagnosed DLBCL patients were obtained. The second-generation sequencing method was used to detect 475 hotspot genes, including KMT2D mutation. Patients were divided into the KMT2D mutation group and KMT2D wild-type group based on the presence or absence of KMT2D gene mutation. Clinical characteristics, differences in co-mutated genes, and survival differences between the two groups were compared. Results The frequency of KMT2D mutation was 31%, which is predominantly observed in elderly patients (P=0.07) and less in the double-expressor phenotype (P=0.07). Compared with the KMT2D wild-type group, KMT2D gene mutation was associated with higher co-mutation rates of CDKN2A (OR=2.82, P=0.01) and BCL2 (OR=3.84, P=0.016), while being mutually exclusive with MYC gene mutation (OR=0.11, P=0.013). In univariate survival analysis, no statistically significant difference in overall survival (OS) was found between the KMT2D mutation group and the wild-type group (P=0.54). Further analysis of the prognostic significance of KMT2D with other gene mutations indicated that patients with KMT2D^mutBTG2^mut had poorer OS than those with KMT2D^wt BTG2^mut (P=0.07) and KMT2D^wt BTG2^wt (P=0.05). On the contrary, patients with KMT2D^mut CD79B^mut had better OS than those with KMT2D^mut CD79B^wt (P=0.09), with no prognostic impact observed for other co-mutated genes. Multivariate Cox regression analysis revealed that Ann Arbor stages Ⅲ and Ⅳ (HR=2.751, 95%CI: 1.169-6.472, P=0.02), elevated LDH levels (HR=2.461, 95%CI: 1.396-4.337, P=0.002), Ki-67 index>80% (HR=1.875, 95%CI: 1.066-3.299, P=0.029), and KMT2D^mutBTG2^mut(HR=4.566, 95%CI: 1.348-15.471, P=0.015) were independent risk factors for OS in patients with DLBCL (P<0.05). Conclusion DLBCL patients with KMT2D mutation often have multiple gene mutations, among which patients with a co-mutated BTG2 gene have poor prognosis.

ObjectiveTo investigate the effect of laminin subunit α3 （LAMA3） on the epithelial-mesenchymal transition （EMT）， invasion， and metastasis abilities of pancreatic cancer （PC）. MethodsA comprehensive analysis was performed for tumor- and EMT-related databases to identify the EMT genes associated with PC， especially LAMA3. The methods of qRT-PCR and Western blot were used to measure the expression level of LAMA3 in PC tissue and cell lines； immunofluorescence assay was used to determine the localization of LAMA3 in PANC-1 cells； Transwell assay was used to investigate the effect of LAMA3 on the invasion and migration abilities of PC cells. The t-test was used for comparison of continuous data between groups. ResultsThe analysis of the TCGA database identified 3 EMT-related oncogenes for PC， i.e.， LAMA3， AREG， and SDC1. The LASSO-Cox regression model showed that LAMA3 had the most significant impact on the prognosis of PC （risk score=0.256 1×LAMA3+0.043 1×SDC1+0.071 4×AREG）. The Cox model and nomogram showed that the high expression of LAMA3 was an independent risk factor for the poor prognosis of PC （hazard ratio=1.32， 95% confidence interval： 1.07‍ ‍—‍ 1.62， P<0.01）. Experimental results showed that there was a significant increase in the expression of LAMA3 in pancreatic cancer tissue compared with the normal pancreatic tissue. Compared with the HPDE cell line， there were varying degrees of increase in the expression of LAMA3 in pancreatic cancer AsPC-1， BxPC-3， PANC-1， MIA PaCa-2， and SW1990 cell lines， with the highest expression level in PANC-1 cells. The enrichment analysis showed that LAMA3 was associated with the biological processes and signaling pathways such as EMT， collagen metabolism， extracellular matrix degradation， the TGF-β pathway， and the PI3K pathway. After the knockdown of LAMA3， there were significant reductions in the expression levels of N-Cadherin， Vimentin， and Snail， while there was a significant increase in the expression level of E-Cadherin. Transwell assay showed that there were significant reductions in the invasion and migration abilities of PANC-1 cells after the knockdown of LAMA3. ConclusionLAMA3 is highly expressed in PC and can promote the EMT， invasion， and migration of PC cells， and therefore， LAMA3 may be used as a novel diagnostic marker and a new therapeutic target for PC.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: This study compares the effects of lithium disilicate glass ceramic onlays and full crowns in restoring cracked teeth that have undergone root canal therapy, providing a reference for the restoration method of cracked teeth that have undergone root canal therapy. Methods: This study was approved by the hospital’s medical ethics committee, and all patients signed the informed consent form. Patients with cracked teeth who underwent root canal treatment in our hospital from January 2022 to January 2023 were enrolled in this study. According to the inclusion and exclusion criteria, 60 patients were screened and enrolled, with a total of 60 affected teeth. The patients were divided into the onlay group and full crown group at a ratio of 2:3 using the random number table method. Lithium disilicate glass ceramic onlays were used to restore the affected teeth in the onlay group (24 cases), and lithium disilicate glass ceramic full crowns were used to restore the affected teeth in the full crown group (36 cases). At 3, 6, and 12 months after the repair, the restoration effect was evaluated and compared with the modified USPH Standard (the aesthetic, functional, and biological aspects of restorations). According to the biological definition of survival, survival analysis was conducted on the affected teeth in both groups. Results: At 3, 6, and 12 months after the repair, 85% of cases in the onlay group achieved grade A, while 80% of cases in the full crown group achieved grade A. There was no statistically significant difference in the restoration effects between the onlay group and the full crown group (P > 0.05). The 12-month survival rate of cracked teeth in the onlay group reached 95.65%, and the 12-month survival rate of cracked teeth in the full crown group reached 94.12%. There was no statistically significant difference in the retention of the affected teeth (P > 0.05). There was no significant effect of age, gender, tooth position, dentition, direction of cracks, the number of marginal ridges associated with cracks, or the type of restoration on the survival status of cracked teeth. (P > 0.05). Conclusion For cracked teeth that have undergone root canal therapy, the short-term effect of lithium disilicate glass ceramic onlays is comparable to that of full crowns, and both have good short-term effects. Onlays are less invasive and are expected to become an alternative restoration method to full crowns.

BACKGROUND:At present,the traditional powder sintering method is easy to introduce impurities in the process of preparing porous titanium,and the manufacturing of porous titanium still faces two major problems:impurity pollution and difficult control of the material forming process. OBJECTIVE:To prepare pure porous titanium with certain porosity,and analyze the microstructure evolution and properties of the porous titanium. METHODS:Porous titanium was prepared at a low energy density by selective laser melting technology.The parameter range of porous titanium with large porosity was obtained by measuring the porosity of the formed specimen,and the evolution of the microstructure and mechanical properties of the specimen in the range were analyzed. RESULTS AND CONCLUSION:(1)With the increase in energy density,the porosity of the porous titanium specimen decreased gradually.When the energy density was between 10.61 and 27.78 J/mm3,porous titanium with a porosity of 11.23%-33.67%could be formed.When the energy density was between 27.78-37.88 J/mm3,the forming parts were relatively dense.(2)The phase composition of porous titanium formed was mainly α titanium.With the increase in energy density,the porosity gradually decreased,and the pore morphology changed from irregularly connected pores to closed nearly spherical pores.The powder particles changed from a slightly sintered neck to a continuous fuse.The CT scan results revealed that there were a large number of connected pores in the forming specimen with a large specific surface area and the pore radius was roughly distributed between 2-6 μm at the energy density of 10.61 J/mm3.Simultaneously,porous titanium with compressive strength of 188-1 000 MPa could be obtained at the energy density of 10.61-27.78 J/mm3,which could meet the requirements of biomedical applications.(3)These results have confirmed that the selective laser melting technology can overcome the problems of impurity pollution and long manufacturing cycle caused by the traditional preparation process,and provide an effective solution for the preparation of porous titanium with excellent mechanical properties.

Objective To compare the diagnostic value of smear acid-fast staining,TB-DNA,X-pert MTB/RIF and culture of Mycobacterium tuberculosis.Methods Four methods were used to detect the perifocal pus of the patients with bone destruction in orthopaedics department within one year,and the results were analyzed statistically,the indexes included sensitivity,specificity,positive predictive value and negative predictive value.Results The sensitivity,specificity,positive predictive value,negative predictive value,and Youden index were 31.75%,100.00%,100.00%,53.74%and 0.32 respectively.TB-DNA had a sensitivity of 88.89%,a specificity of 98.00%,a positive predictive value of 98.25%,a negative predictive value of 87.50%,and a Youden Index of 0.87.Xpert MTB/Rif had a sensitivity of 95.23%,a specificity of 68.00%,and a positive predictive value of 78.95%,the negative predictive value was 91.90%,the Youden index was 0.63.The sensitivity,the specificity,the positive predictive value,the negative predictive value and the Youden index were 41.27%,100.00%,100.00%,57.47%and 0.41 respectively,(χ2 = 77.354,P<0.005).Conclusion Among the four methods,TB-DNA has a good Sensitivity and specificity,Xpert mtbrif has a good sensitivity,TB-DNA and Xpert mtbrif ha a good authenticity,and both positive and negative predictive values are high,it has good value in the diagnosis of bone tuberculosis.