BACKGROUND:Exercise as a form of active rehabilitation can improve the dysfunction caused by peripheral nerve injury,and different exercise modalities target different lesion sites and recovery mechanisms. OBJECTIVE:To comprehensively analyze the application and mechanisms of different exercise modalities in functional recovery from peripheral nerve injury. METHODS:A computerized search was conducted in PubMed and CNKI databases for relevant literature published before January 2024.The search terms used were"peripheral nerve injury,spinal cord,exercise,cerebral cortex,muscle atrophy,mirror therapy,blood flow restriction training"in both English and Chinese.Finally,77 articles were included for review. RESULTS AND CONCLUSION:Peripheral nerve injury can cause systemic pathological changes such as skeletal muscle atrophy,corresponding spinal cord segmental lesions,and sensorimotor cortex remodeling.Aerobic exercise can improve dysfunction by enhancing the immune response,promoting glial cell polarization,and promoting the release of nerve growth factor.Blood flow restriction exercise can regulate the secretion of muscle growth factor,promote muscle growth and enhance muscle strength.Mirror movement has a good effect in activating the cerebral cortex and reducing cortical remodeling.Different exercise modalities have potential benefits in functional recovery after peripheral nerve injury;however,there are still some problems and challenges,such as the choice of exercise modalities,the control of exercise intensity and frequency,and the detailed analysis of mechanisms.

BACKGROUND:Currently,there have been studies on three-dimensional digitalization and visualization systems for adult acupoints,but there are not many reports on the visualization of pediatric acupoints based on real pediatric digital sectional anatomical datasets. OBJECTIVE:To design and develop a digital three-dimensional visualization system for children's neck acupoints,to provide a basis for acupuncture and moxibustion,meridian and acupoint science teaching,clinical practice,acupuncture manipulation practice,and acupuncture safety research,and to provide a basis for the development of children's acupoint simulation system. METHODS:Based on a real cross-sectional anatomical dataset of pre-school boys,a three-dimensional digital virtual anatomical model of the neck region of children and internal multi-organ three-dimensional reconstruction were completed using PhotoShop 2021 and Digihuman Reconstruction System software.A database of 11 acupoints was compiled,including Fengfu and Fengchi,using the Unity database language.A three-dimensional model of children's neck anatomy,acupoint database,and writing acupuncture operation codes were integrated in Unity3D software.A three-dimensional digital visualization system for children's neck acupoints was successfully created,which integrated simulation acupoint positioning,three-dimensional acupoint anatomy,acupuncture training,clinical teaching,and acupuncture safety research. RESULTS AND CONCLUSION:(1)This study was based on real child specimens.Manual layer by layer segmentation of cross-sectional images was used to ensure the accuracy of the three-dimensional model to the greatest extent possible.The 3D software Digihuman Reconstruction System was utilized to extract and save independent segmentation data.PhotoShop 2021 software was collaborated with to complete dozens of three-dimensional reconstruction anatomical models of the outer skin of the neck and its internal bone structure,cervical spinal cord,blood vessels and nerves,muscles,and ligaments in children.The basic morphology and overall contour integrity verification of each independent structure were completed in MeshLab software.The 3-material research 13.0 software was applied for final fine tuning and anatomical position confirmation,successfully simulating and restoring the true anatomical morphology of the neck of preschool children.(2)Based on and referring to the national standards of the People's Republic of China,a database of commonly used acupoints in children's neck region was collected and organized,including their names,meridians,positioning,local anatomy,needle insertion levels,acupuncture methods,acupuncture accidents and prevention,acupoint indications,and two-dimensional anatomical sectional images.(3)Unity3D software was employed to integrate the three-dimensional model of children's neck,acupuncture simulation operation,and acupoint database,and a three-dimensional digital children's neck acupoint acupuncture visualization system was successfully constructed.The system displayed information on children's neck acupoints,two-dimensional and three-dimensional anatomical structures,and achieved two-dimensional and three-dimensional acupuncture simulation functions and acupuncture safety research functions for children's neck acupoints.Based on the ultra-thin sectional anatomical dataset of real child specimens,the first three-dimensional digital and visualization system for acupoints in the neck region of children had been constructed.Compared with previous acupoint acupuncture systems,it is more in line with the anatomical and morphological development characteristics of Asian children and has high application value in the fields of acupuncture safety research,clinical teaching,and acupuncture simulation training.

This article systematically analyzes the historical evolution of the name， origin， medicinal parts， processing and other aspects of Euphorbiae Pekinensis Radix（EPR） by referring to the herbal medicine， medical books， prescription books and other documents of the past dynasties， combined with the relevant modern research materials， so as to provide a basis for the development and utilization of famous classical formulas containing this herbal medicine. According to research， EPR was first recorded in the Shennong Bencaojing in the name of Daji， and it is the correct name of the herbal medicine in all dynasties， there are also other aliases such as Qiongju， Hongya Daji， and Xiamaxian. The dried roots of Euphorbia pekinensis from Euphorbiaceae was the mainstream of the past dynasties. Before the Ming dynasty， the above ground parts of E. pekinensis were used as Zeqi in herbal works. However， since LI Shizhen in the Ming dynasty proposed that the origin of Zeqi should be E. helioscopia， the aerial part of EPR is no longer used as medicine. Since modern times， the roots of Knoxia valerianoides has been used as EPR， and has become the mainstream of commodities， which should be corrected. Throughout history， it has been recorded that the main producing areas were Jiangsu， Anhui， Zhejiang， Shanxi and other regions， while modern botanical survey have shown that EPR is a widespread species distributed throughout the country. In ancient times， the harvesting time of EPR was mostly the twelfth lunar month， while in modern time， it is more common to harvest in autumn and winter. The main processing methods of EPR in ancient times were vinegar processing， wine processing， and stir frying， while in modern times， it is uniformly vinegar processing. In the medicinal properties and clinical aspects， the records are basically consistent throughout history， mainly characterized by bitter taste， cold and toxic nature. Its main efficacy is expelling water retention and reducing swelling. Based on the textual research， it is suggested to choose the dried roots of E. pekinensis when famous classical formulas containing EPR， processing method can be based on the original specified prescription requirements， if the processing method is not clear， it is recommended to use vinegar-processed products as medicine.

[Objective] To conduct a retrospective statistical comparison of alanine aminotransferase (ALT) test values in blood donors prior to blood collection, aiming to analyze the objective characteristics of the population with elevated ALT levels (ALT>50 U/L) and provide reference data for adjusting the screening eligibility threshold for ALT. [Methods] The preliminary ALT screening data of 30 341 blood donor samples collected prior to blood donation from three smart blood donation sites at the Shenzhen Blood Center between 2022 and 2023 were extracted and compared with data from a health examination department of a tertiary hospital in Shenzhen (representing the general population, n=24 906). Both datasets were categorized and statistically described. A retrospective analysis was conducted to examine the associations between ALT test results and factors such as donors' gender, age, ethnicity, donation site, donation season, and frequency of blood donation. [Results] The ALT levels in both blood donors and the general population were non-normally distributed. The 95th percentile of ALT values was calculated as 61.4 U/L (male: 67.8 U/L, female: 39.3 U/L) for blood donors and 58.1 U/L (male: 63.7 U/L, female: 51.2 U/L) for the general population. The non-compliance rates (ALT>50 U/L) were 7.65% (2 321/30 341) in blood donors and 7.08% (1 763/24 906) in the general population. There were significant differences (P<0.05) in the ALT failure rate among blood donors based on gender, age, and donation site, but no significant differences (P>0.05) during the blood donation season. There was no statistically significant difference (P>0.05) in the positive rates of four serological markers (HBsAg, anti HCV, HIV Ag/Ab, anti TP) for blood screening pathogens between ALT unqualified and qualified individuals (2.05% vs 1.5%). If the ALT qualification threshold was raised from 50 U/L to 90 U/L, the non qualification rates of male and female blood donors would decrease from 9.82% (2 074/21 125) to 2.23% (471/21 125) and from 2.70% (249/9 216) to 0.75% (69/9 216), respectively. Among the 154 blood donors who donated blood more than 3 times, 88.31% of the 248 ALT test results were in the range of 50-90 U/L. Among them, 9 cases had ALT>130 U/L, and ALT was converted to qualified in subsequent blood donations. [Conclusion] There are differences in the ALT failure rate among blood donors of different genders and ages, and different blood donation sites and operators can also affect the ALT detection values of blood donors. The vast majority of blood donors with ALT failure are caused by transient and non pathological factors. With the widespread use of blood virus nucleic acid testing, appropriately increasing the ALT qualification threshold for blood donors can expand the qualified population and alleviate the shortage of blood sources, and the risk of blood safety will not increase.

To summarise the clinical experience of Professor TONG Xiaolin in treating prediabetes combined with overweight or obesity using the method of relieving depression and reducing turbidity. It is believed that prediabetes belongs to the category of "spleen-heat syndrome" in traditional Chinese medicine， and its core pathogenesis is center fullness with internal heat， while obesity is the initiating factor for exacerbating center fullness and internal heat， therefore， it is of great significance to reduce the risk of diabetes by interrupting the transformation between overweight， obesity and glucose metabolism abnormality. It is proposed that the main pathogenesis of prediabetes combined with overweight or obesity is qi depression and turbidity obstruction in middle jiao， with qi depression as the root and turbidity obstruction as the cause， forming a treatment idea with the method of relieving depression and reducing turbidity as the core. In clinic， Dahuang Huanglian Xiexin Decoction （大黄黄连泻心汤） is used as the basic prescription， with a primary focus on directing the turbid downward， supplemented by regulating qi， which embodies the concept of "promoting movement through descent， then figuring out the root of spleen-heat syndrome. Furthermore， the treatment is flexibly modified based on the patient's deficiency-excess syndrome to ensure individualized therapy.

ObjectiveThis study explores the methods of lung tissue extraction and fixation required for pathological studies of fetal rats, based on the unique physiological structure of fetal rat lung tissue and existing lung tissue fixation techniques for adult rats. MethodsSix pregnant adult SD rats at 20.5 days of gestation were subjected to cesarean section to obtain fetal rats. Four healthy fetal rats with similar body weight, vital signs, and respiratory status were selected from each pregnant rat, and they were randomly divided into the following groups using a random number table: direct lung infiltration group, lung infiltration group after intratracheal infusion, whole-body infiltration group of fetal rats, and whole-body infiltration group after intratracheal infusion of fetal rats. To systematically compare and analyze the anatomical morphology under different fixation methods, lung tissues from four groups of fetal rats were harvested, perfused, and fixed, and the gross morphology of lung tissues in each group was observed. Paraffin sections were prepared and stained with Hematoxylin-Eosin (H&E). The histological morphology of the whole lung, alveoli, and bronchi was further examined under optical microscopy. ResultsIn the direct lung infiltration group, the hilar structures were unclear, lung lobation was indistinct, the shape was irregular, lung cavities were small, and alveoli and bronchi were shrunken. In the lung infiltration group after intratracheal infusion, the hilar structures were clear, lobation was pronounced, the shape was regular, lung cavities were large, and alveoli and bronchi were full. Both the whole-body infiltration group and whole-body infiltration group after intratracheal infusion of fetal rats exhibited visible lungs, hearts, skins, and other organs. The lung tissues of both groups showed obvious lobulation, irregular shape, and damage at the margins of lung lobes. In the whole-body infiltration group, the thoracic cavities of the fetus were flattened, lung cavities were small, and alveoli and bronchi were shrunken. In the whole-body infiltration group after intratracheal infusion of fetal rats, the fetal thoracic cavities were full, lung cavities were large, and alveoli and bronchi were relatively full. ConclusionThe lung infiltration after intratracheal infusion method for fetal rat lung tissue fixation outperforms direct lung infiltration, whole-body infiltration of fetal rats, and whole-body infiltration after intratracheal infusion of fetal rats in terms of preservation of the lung tissue's original morphology, paraffin sectioning, staining, and pathological observation and analysis. The embedding, sectioning, and staining processes are also simple and save consumables. Therefore, intratracheal infusion followed by lung infiltration method is recommended for fixation in histopathological observation of fetal rat lung tissue.

Objective Zinc finger protein 335 (Zfp335) plays a crucial role in the early development of thymic T cells and the differentiation of peripheral T cell subpopulations. The objective of this study is to investigate the role and underlying mechanisms of Zfp335 in the regulation of regulatory T cell (Treg) within tumor immunity. Methods The Zfp335 gene was specifically knocked out in Treg using tamoxifen (Zfp335^fl/fl FOXP3^creERT2), and the MC38 tumor model was established. On the 7th day after tumor inoculation, tumor size was observed and measured. Tumor size was monitored and recorded daily starting from day 7 post-inoculation. On day 12, tumors were harvested, and the proportions of CD4⁺ T cells, CD8⁺ T cells, and Treg were analyzed by flow cytometry. Additionally, the mitochondrial function of effector regulatory T cell (eTreg) was assessed. Results From day 10 post-tumor inoculation, tumor volume in the Zfp335^CKO group was significantly reduced compared to that of the wild-type (WT) group. Furthermore, the infiltration of CD4⁺ and CD8⁺ T cells, along with their respective effector cells, was significantly higher in the Zfp335^CKO group than in the WT group. The proportions of CD4⁺ and CD8⁺ T cells producing interferon-gamma (IFN-γ) and tumor necrosis factor-alpha (TNF-α) were also significantly increased in the Zfp335^CKO group compared to that of the WT group. In addition, the percentage of CD8⁺ T cells secreting granzyme B (GzmB) was significantly higher in the Zfp335^CKO group than that in the WT group. In contrast, the proportion of Treg and inducible T cell co-stimulator (ICOS)⁺ Treg in the Zfp335^CKO group was significantly lower than that in the WT group. Finally, the expression level of Mitotracker Deep Red in eTreg from the Zfp335^CKO group was significantly reduced compared to that in the WT group. Conclusion During tumorigenesis, the specific deletion of Zfp335 impairs Treg activation, which is related to decreased mitochondrial function in eTreg. In Zfp335^CKO mice. Tumors exhibit increased infiltration of effector T cells, accompanied by elevated levels of cytotoxic cytokines, ultimately enhancing resistance to tumor progression.
Animals ; T-Lymphocytes, Regulatory/metabolism* ; Mice ; CD8-Positive T-Lymphocytes/immunology* ; Neoplasms/genetics* ; Cell Line, Tumor ; Mice, Inbred C57BL ; Mice, Knockout ; DNA-Binding Proteins/genetics* ; Female

Extracellular vesicles (EVs) are membrane-bound vesicles secreted by cells, including exosomes, microvesicles, and apoptotic bodies, which play critical roles in intercellular communication, material transport, and signal transduction. In recent years, increasing evidence has highlighted the essential function of EVs in early embryo development. By carrying bioactive molecules such as proteins, nucleic acids (e.g., mRNA and miRNA), and lipids, EVs regulate embryonic gene expression, cell proliferation, differentiation, and the microenvironment. Studies have shown that EVs derived from various segments of the female reproductive tract can enhance embryonic developmental potential, improve embryo quality, and facilitate implantation. Additionally, EVs secreted by embryos themselves participate in intercellular communication and play pivotal roles during embryogenesis. This review summarizes recent advances in understanding the functions of EVs in early embryo development, discusses their roles in mediating cell-cell communication and regulating gene expression, and explores their potential applica-tions in reproductive medicine and clinical practice, offering new perspectives for optimizing assisted reproductive technologies.

Autism Spectrum Disorders (ASDs) are reported as a group of neurodevelopmental disorders. The structural changes of brain regions including the hippocampus were widely reported in autistic patients and mouse models with dysfunction of ASD risk genes, but the underlying mechanisms are not fully understood. Here, we report that deletion of Trio, a high-susceptibility gene of ASDs, causes a postnatal dentate gyrus (DG) hypoplasia with a zigzagged suprapyramidal blade, and the Trio-deficient mice display autism-like behaviors. The impaired morphogenesis of DG is mainly caused by disturbing the postnatal distribution of postmitotic granule cells (GCs), which further results in a migration deficit of neural progenitors. Furthermore, we reveal that Trio plays different roles in various excitatory neural cells by spatial transcriptomic sequencing, especially the role of regulating the migration of postmitotic GCs. In summary, our findings provide evidence of cellular mechanisms that Trio is involved in postnatal DG morphogenesis.
Animals ; Dentate Gyrus/metabolism* ; Mice ; Morphogenesis/physiology* ; Neurons/pathology* ; Cell Movement ; Mice, Inbred C57BL ; Autism Spectrum Disorder/pathology* ; Mice, Knockout ; Neural Stem Cells ; Male ; Neurogenesis ; Autistic Disorder/genetics*

OBJECTIVES: This study aims to use 3D prin-ting technology based on the principle of stereo lithography apparatus (SLA) to shape dental lithium disilicate ceramics and study the effects of different slurry proportions on the microstructure and properties of heat-treated samples. METHODS: The experimental group comprised lithium disilicate ceramics manufactured through SLA 3D printing, and the control group comprised lithium disilicate ceramics (IPS e.max CAD) fabricated through commercial milling. An array of different particle sizes of lithium disilicate ceramic powder materials (nano and micron) was selected for mixing with photocurable acrylate resin. The proportion of experimental raw materials was adjusted to prepare five groups of ceramic slurries for 3D printing (Groups S1-S5) on the basis of rheological properties, stability, and other factors. Printing, debonding, and sintering were conducted on the experimental group with the optimal ratio, followed by measurements of microstructure, crystallographic information, shrinkage, and mechanical properties. RESULTS: Five groups of lithium disilicate ceramic slurries were prepared, of which two groups with high solid content (75%) (Groups S2 and S3) were selected for 3D printing. X-ray diffraction and scanning electron microscopy results showed that lithium disilicate was the main crystalline phase in Groups S2 and S3, and its microstructure was slender, uniform, and compact. The average grain sizes of Groups S2 and S3 were (559.79±84.58) nm and (388.26±61.49) nm, respectively (P<0.05). Energy spectroscopy revealed that the samples in the two groups contained a high proportion of Si and O elements. After heat treatment, the shrinkage rate of the two groups of ceramic samples was 18.00%-20.71%. Test results revealed no statistical difference in all mechanical properties between Groups S2 and S3 (P>0.05). The flexural strengths of Groups S2 and S3 were (231.79±21.71) MPa and (214.86±46.64) MPa, respectively, which were lower than that of the IPS e.max CAD group (P<0.05). The elasticity modulus of Groups S2 and S3 were (87.40±12.99) GPa and (92.87±19.76) GPa, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). The Vickers hardness values of Groups S2 and S3 were (6.53±0.19) GPa and (6.25±0.12) GPa, respectively, which were higher than that of the IPS e.max CAD group (P<0.05). The fracture toughness values of Groups S2 and S3 were (1.57±0.28) MPa·m^0.5 and (1.38±0.17) MPa·m^0.5, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). CONCLUSIONS The combination of lithium disilicate ceramic powders with different particle sizes can yield a slurry with high solid content (75%) and suitable viscosity and stability. The dental lithium disilicate ceramic material is successfully prepared by using 3D printing technology. The 3D-printed samples show a small shrinkage rate after heat treatment. Their microstructure conforms to the crystal phase of lithium disilicate ceramics, and their mechanical properties are close to those of milled lithium disilicate ceramics.
Printing, Three-Dimensional ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Materials Testing ; Particle Size