ObjectiveThis study aims to explore the mechanism by which Yishen Huoxue Tongqiao Formula improves metabolism-neuroplasticity and treats unilateral vestibular labyrinth destruction by regulating the metabolic balance of glutamate （Glu）/γ-aminobutyric acid （GABA）. Methods48 Sprague-Dawley （SD） adult rats were randomly divided into the sham operation group， model group， Yishen Huoxue Tongqiao Formula groups with low， medium， and high doses （9.20， 18.39， 36.78 g·kg^-1）， and betahistine group （1.62 mg·kg^-1）. A unilateral vestibular labyrinth destruction （vestibular dysfunction） model was established by intratympanic injection of chloroform into the right ear， while the control group received intratympanic injection of normal saline. Drugs were administered once daily for seven consecutive days. During the period， behavioral tests were performed to evaluate the behaviors of rats after unilateral vestibular labyrinth destruction. Hematoxylin-eosin （HE） staining and Nissl staining were used to observe the neuronal morphology in the medial vestibular nucleus. Golgi staining was employed to assess the number of dendritic spines of neurons in the medial vestibular nucleus. Ultra-performance liquid chromatography-tandem mass spectrometry （LC-ESI-MS/MS） was utilized to detect Glu/GABA. Immunofluorescence and immunohistochemistry were used to detect the expressions of neuronal nuclei （NeuN）， growth-associated protein 43 （GAP-43）， and glial fibrillary acidic protein （GFAP）. Western blot and real-time fluorescent quantitative polymerase chain reaction （Real-time PCR） were applied to determine the expressions of glutamate-immunoreactive （Glu-IR）， GABA， GFAP， postsynaptic density protein 95 （PSD-95）， and GAP-43. ResultsCompared with the sham operation group， the model group presented with head deviation， balance disorder， increased tail suspension score， nuclear consolidation of medial vestibular nerve neurons， and decreased Nissl bodies （P<0.01）. The number of dendritic spines in neurons and NeuN-positive cells decreased. The content of Glu decreased. The content of GABA increased （Glu/GABA decreased）. The expression of GAP-43 was down-regulated， and GFAP was up-regulated （P<0.05， P<0.01）. The expressions of Glu-IR， PSD-95， and GAP-43 proteins， as well as Glu-IR mRNA decreased， while the expressions of GABA and GFAP proteins and mRNA increased （P<0.05， P<0.01）. Compared with those in the model group， the head deviation， imbalanced behavior， and tail suspension scores in each treatment group decreased， with alleviated neuronal injury and recovered Nissl bodies （P<0.01）. The number of dendritic spines of neurons increased， and the number of NeuN-positive cells rebounded. The content of Glu increased， and the content of GABA decreased （Glu/GABA increased）. GFAP was down-regulated， and GAP-43 was up-regulated （P<0.05， P<0.01）. The expressions of Glu-IR， PMD-95， and GAP-43 proteins， as well as Glu-IR mRNA increased， while the expressions of GABA and GFAP proteins and mRNA decreased. The effect was more significant in the high-dose group （P<0.01）. ConclusionThe Yishen Huoxue Tongqiao Formula can alleviate vestibular dysfunction， and its mechanism may be associated with regulating the metabolic balance of Glu/GABA， mitigating neural damage， improving synaptic plasticity （promoting GAP-43 expression and inhibiting GFAP expression）， and facilitating vestibular compensation.

Hygroscopicity research has long been a key focus and hot topic in Chinese materia medica（CMM）. Elucidating hygroscopic mechanisms plays a vital role in formulation design， process optimization， and storage condition selection. Hygroscopic models serve as essential tools for characterizing CMM hygroscopic mechanisms， with various types available. The double exponential model is a kinetic mathematical model constructed based on the law of conservation of energy and Fick's first law of diffusion， tailored to the physical properties of CMM extracts. In recent years， this model has been extensively applied to simulate the dynamic moisture absorption behavior of CMM extracts and solid dosage forms under varying humidity conditions. It has revealed the correlation between moisture absorption kinetic parameters and material properties， offering a new perspective for characterizing the moisture uptake behavior of CMM. This paper systematically reviews the application progress of this model in the field of CMM， analyzes its advantages， disadvantages， and challenges in this domain， and explores its potential application trends in other fields. It aims to provide references for elucidating the moisture absorption mechanisms of CMM and researching moisture-proofing technologies， while also offering insights for its broader application in food and polymer materials.

The standard of Pharmaceutical packaging materials is an important part of the Chinese Pharmacopoeia. This article focuses on working background, general idea, working process, main framework, and its role and significance of the pharmaceutical packaging materials standards system in the Chinese Pharmacopoeia 2025 Edition, which can contribute to accurately understand and utilize the standards in the Chinese Pharmacopoeia 2025 Edition.

Objective To introduce an innovative technique, the "balance-shaped sternal elevation device" and its application in the subxiphoid uniportal video-assisted thoracoscopic surgery (VATS) for anterior mediastinal masses resection. Methods Patients who underwent single-port thoracoscopic assisted anterior mediastinal tumor resection through the xiphoid process at the Department of Thoracic Surgery, West China Hospital, Sichuan University from May to June 2024 were included, and their clinical data were analyzed. Results A total of 7 patients were included, with 3 males and 4 females, aged 28-72 years. The diameter of the tumor was 1.9-17.0 cm. The operation time was 62-308 min, intraoperative blood loss was 5-100 mL, postoperative chest drainage tube retention time was 0-9 days, pain score on the 7th day after surgery was 0-2 points, and postoperative hospital stay was 3-12 days. All patients underwent successful and complete resection of the masses and thymus, with favorable postoperative recovery. Conclusion The "balance-shaped sternal elevation device" effectively expands the retrosternal space, providing surgeons with satisfactory surgical views and operating space. This technique significantly enhances the efficacy and safety of minimally invasive surgery for anterior mediastinal masses, reduces trauma and postoperative pain, and accelerates patient recovery, demonstrating important clinical significance and application value.

OBJECTIVE To establish the fingerprint of Pinghuo tea standard decoction and a method for determination of multi-component to clarify the transfer relationship of quantities and quality from pieces and standard decoction. METHODS Fifteen batches of Pinghuo tea standard decoction were prepared and the extract rate was determined； the fingerprint of the preparation was established by using high-performance liquid chromatography（HPLC）； the similarity evaluation and the determination of common peaks were performed， and chemometric analysis was performed； the same method was used to determine the content of indicator components and the transfer rate was calculated. The chromatographic column was Venusil C18 column with mobile phase consisted of acetonitrile-0.1% phosphoric acid solution （gradient elution）； the column temperature was 30 ℃， and the detection wavelengths were 238 nm （0-37 min， 85-102 min） and 330 nm （37-85 min） at a flow rate of 1.0 mL/min with an injection volume of 10 μL. RESULTS The similarity of HPLC fingerprints for 15 batches of Pinghuo tea standard decoction was not lower than 0.968. A total of 24 common peaks were calibrated and 9 peaks were recognized， which were as follows neochlorogenic acid （peak 3）， chlorogenic acid （peak 6）， geniposide （peak 9）， glycyrrhizin （peak 10）， galuteolin （peak 11）， isochlorogenic acid A （peak 14）， luteolin （peak 21）， kaempferol （peak 23） and glycyrrhizic acid （peak 24）. Cluster analysis， principal component analysis and orthogonal partial least squares discriminant analysis showed consistent results， all of which could classify the 15 batches of samples into three categories. The linear range of indicator components in 15 batches of Pinghuo tea standard decoction， such as geniposide， luteolin， isochlorogenic acid A， glycyrrhizin， and glycyrrhizic acid， were 0.020 580-0.411 600， 0.001 617-0.080 850， 0.006 076-0.607 600， 0.005 125-0.071 740， and 0.017 288-0.432 200 mg/mL， respectively； RSDs of precision， repeatability， stability and recovery rate tests were all not higher than 4% （n＝6）. The mass fractions ranged 3.227 9-10.002 2， 0.297 4-0.554 6， 3.350 1-6.159 6， 0.720 6-1.073 3， 2.003 1-3.030 1 mg/g； transfer rates from the pieces and standard decoction were 19.762 8%-35.840 5%， 12.123 3%-21.254 0%， 46.097 2%-82.869 4%， 58.708 8%-91.629 6%， 39.114 3%-63.710 6%. The transfer rates of the extract from 15 batches of Pinghuo tea standard decoction ranged from 61.15%-84.68%. CONCLUSIONS Established HPLC fingerprint and content determination methods in this study are simple and accurate， which can provide reference for the quantitative value transfer study， quality control， clinical application and the development of subsequent formulations of Pinghuo tea standard decoction.

Objective: To investigate the situation and influencing factors of school bullying experienced by primary and middle school students, so as to provide the basis for formulating school bullying intervention measures and promoting students' physical and mental health development. Methods: All the counties (cities, districts) in Zhejiang Province were stratified to urban and suburban areas, primary, junior high and senior high school students were selected using a stratified cluster sampling method. Basic information, lifestyle and school bullying were collected through questionnaire surveys. Factors affecting school bullying experienced by primary and middle school students were analyzed using a multivariable logistic regression model. Results: Totally 137 846 valid questionnaires were recovered, with an effective recovery rate of 97.17%. There were 72 526 males (52.61%) and 65 320 females (47.39%). There were 47 561 primary school students (34.50%), 47 701 junior high school students (34.61%) and 42 584 senior high school students (30.89%). A total of 3 987 students suffered from school bullying, accounting for 2.89%. The proportions of being maliciously teased, being intentionally excluded from group activities/isolated, being teased about physical defects or appearance, being hit/kicked/pushed/shoved/locked in a room, being threatened, and being extorted for money were 2.04%, 1.18%, 1.11%, 0.86%, 0.84% and 0.83%, respectively. Multivariable logistic regression analysis showed that the students who were males (OR=1.122, 95%CI: 1.048-1.202), lived in suburban areas (OR=1.322, 95%CI: 1.233-1.418), lived in areas with medium (OR=1.086, 95%CI: 1.006-1.173) or underdeveloped (OR=1.298, 95%CI: 1.191-1.415) economic level, had higher academic levels (junior high school, OR=1.380, 95%CI: 1.270-1.499; senior high school, OR=1.210, 95%CI: 1.083-1.351), lived on campus (OR=1.489, 95%CI: 1.372-1.616), engaged in fights (OR=6.029, 95%CI: 5.585-6.509), attempted to smoke (OR=1.320, 95%CI: 1.128-1.545), drank (OR=1.735, 95%CI: 1.575-1.912), were scolded and beaten by parents (OR=1.972, 95%CI: 1.822-2.135) and were obese (OR=1.240, 95%CI: 1.132-1.360) were more likely to experience school bullying. Conclusion The harm of school bullying to the physical and mental health of primary and middle school students should be taken seriously, and active policy measures should be adopted to strengthen intervention.

Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.

Pregnancy complicated by aortic root aneurysm in patients with Marfan syndrome is one of the main causes of termination of pregnancy or even death in pregnant women. A very small number of pregnant women require cardiac surgery to preserve pregnancy under extracorporeal circulation, and all surgeries use aortic root replacement. We reported a 30-year-old patient with severe aortic regurgitation combined with giant aortic root aneurysm and Marfan syndrome in mid-pregnancy. Valve-sparing root replacement using reimplantation technology was performed via a multidisciplinary cooperation model. This not only achieved the patient’s desire to continue pregnancy but also avoided the anticoagulation and bleeding complications brought by mechanical valve replacement, reduced pregnancy risks and improved long-term quality of life. Postoperative echocardiography showed a small amount of aortic valve regurgitation, aortic valve coaptation height of 0.6 cm, effective height of 1.1 cm, maximum aortic flow velocity of 1.4 m/s, mean transvalvular pressure gradient of 4.4 mm Hg, and satisfactory clinical results.

Histone deacetylase 3 (HDAC3) is an epigenetic modification enzyme that plays a crucial role in the development and progression of diabetes and its complications. Studies have reported that increased HDAC3 activity is associated with pancreatic β-cell dysfunction in type 1 diabetes, while in type 2 diabetes, HDAC3 affects insulin resistance and signaling by regulating the metabolism of the liver, adipose tissue, and muscle. Additionally, HDAC3 plays a key role in diabetic complications such as cardiomyopathy, retinopathy, and nephropathy. Selective inhibition of HDAC3 has the potential to improve insulin sensitivity, reduce chronic inflammation, and enhance pancreatic cell function, offering a promising new therapeutic strategy for diabetes and its complications.

Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.