Biorefinery of chemicals from straw is an effective approach to alleviate the environmental pollution caused by straw burning. In this paper, we prepared gellan gum immobilized Lactobacillus bulgaricus T15 gel beads (LA-GAGR-T15 gel beads), characterized their properties, and established a continuous cell recycle fermentation process for D-lactate (D-LA) production using the LA-GAGR-T15 gel beads. The fracture stress of LA-GAGR-T15 gel beads was (91.68±0.11) kPa, which was 125.12% higher than that of the calcium alginate immobilized T15 gel beads (calcium alginate-T15 gel beads). This indicated that the strength of LA-GAGR-T15 gel beads was stronger, and the strain was less likely to leak out. The average D-LA production was (72.90±2.79) g/L after fermentation for ten recycles (720 h) using LA-GAGR-T15 gel beads as the starting strain and glucose as the substrate, which was 33.85% higher than that of calcium alginate-T15 gel beads and 37.70% higher than that of free T15. Subsequently, glucose was replaced by enzymatically hydrolyzed corn straw and fermented for ten recycles (240 h) using LA-GAGR-T15 gel beads. The yield of D-LA reached (1.74±0.79) g/(L·h), which was much higher than that of using free bacteria. The wear rate of gel beads was less than 5% after ten recycles, which indicated that LA-GAGR is a good carrier for cell immobilization and can be widely used in industrial fermentation. This study provides basic data for the industrial production of D-LA using cell-recycled fermentation, and provides a new way for the biorefinery of D-LA from corn straw.
Fermentation ; Lactobacillus delbrueckii ; Zea mays ; Lactic Acid ; Alginates/chemistry* ; Glucose

Polylactic acid is synthesized indirectly by the polymerization method, according to the standard GB/T 16886.18-2011, the evaluation parameters and methods about chemical characterization of polylactic acid have been established. By using rigorous and comprehensive comparative analysis, the chemical equivalency of domestic and imported polylactic acid materials has been proved, along with the "Medical Device Biology Evaluation and Review Guide", paving the way of using domestic polylactic acid in implantable medical devices.
Equipment and Supplies ; Lactic Acid ; Polyesters ; chemistry ; Polymers

OBJECTIVE: To establish an animal model for loaded swimming, so as to investigate the energy metabolism effects of soybean isoflavones (SI) on swimming mice. METHODS: Thirty male Kunming mice were randomly divided into three groups:normal control, swimming group, and swimming+SI group. The normal control group mice were fed a basic AIN-93M diet, the SI groups were supplied with soybean isoflavones(4 g/kg).Two weeks later, the mice were forced to swim for an hour,and then all the mice were killed, the samples of blood, liver and muscles of hind were collected.The serum contents of lactic acid(Lac), the activities of lactic dehydrogenase (LDH), succinate dehydrogenase (SDH), creatine kinase (CK) and ATPase were measured. RESULTS: Compared with normal control,the serum content of Lac was significantly improved in the group of the swimming control and SI(<0.05),the activity of LDH in the serum was obviously improved in the group of the swimming control and SI, and the activity of CK and SDH were both significantly improved in the group of the swimming control and SI except the activity of SDH in the liver of the group SI; compared with the swimming control,the serum contents of Lac,the activities of LDH, ATPase, SDH, CK were obviously improved(<0.05). CONCLUSIONS Soybean isoflavones can improve the energy metabolism,antioxidant capacity of the swimming mice.
Adenosine Triphosphatases ; blood ; Animals ; Creatine Kinase ; blood ; Energy Metabolism ; Isoflavones ; pharmacology ; L-Lactate Dehydrogenase ; blood ; Lactic Acid ; blood ; Male ; Mice ; Random Allocation ; Soybeans ; chemistry ; Succinate Dehydrogenase ; blood ; Swimming

As the carrier of water-insoluble drugs, microspheres can play a role in increasing solubility and delaying releasing essence. The objective of this study was to improve the solubility and to delay the release of a newly discovered antitumor compound 3β-hydroxyolea-12-en-28-oic acid-3, 5, 6-trimethylpyrazin-2-methyl ester (T-OA). Early-stage preparation discovery concept (EPDC) was employed in the present study. The preparation, physicochemical characterization, and drug release properties of PLGA microspheres were evaluated. T-OA-loaded PLGA microspheres were prepared by an oil-in-water (O/W) emulsification solvent evaporation method. Characterization and release behaviors of the T-OA PLGA microspheres were evaluated by X-ray diffract (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high performance liquid chromatography (HPLC). The results demonstrated that T-OA-loaded PLGA microspheres could be successfully obtained through solvent evaporation method with appropriate morphologic characteristics and high encapsulation efficiency. The XRD analysis showed that T-OA would be either molecularly dispersed in the polymer or distributed in an amorphous form. The DSC and FTIR analysis proved that there were interactions between T-OA and PLGA polymer. SEM observations displayed the morphology of the microspheres was homogeneous and the majority of the spheres ranged between 50 and 150 μm. The drug release behavior of the microspheres in the phosphate buffered saline medium exhibited a sustained release and the duration of the release lasted for more than 23 days, which was fit with zero-order release pattern with r = 0.9947. In conclusion, TOA-loaded PLGA microspheres might hold great promise for using as a drug-delivery system in biomedical applications.
Antineoplastic Agents ; chemistry ; Calorimetry, Differential Scanning ; Chemistry, Pharmaceutical ; Delayed-Action Preparations ; chemistry ; Drug Carriers ; chemical synthesis ; chemistry ; Lactic Acid ; chemical synthesis ; chemistry ; Microscopy, Electron, Scanning ; Microspheres ; Oleanolic Acid ; chemistry ; Polyglycolic Acid ; chemical synthesis ; chemistry ; Polylactic Acid-Polyglycolic Acid Copolymer ; Pyrazines ; chemistry ; Solubility ; Spectroscopy, Fourier Transform Infrared ; X-Ray Diffraction

OBJECTIVETo fabricate a new composite scaffold material as an implant for sustained delivery of rifampicin and evaluate its performance of sustained drug release and biocompatibility.

METHODSThe composite scaffold material was prepared by loading poly(lactic-co-glycolic) acid (PLGA) microspheres that encapsulated rifampicin in a biphasic calcium composite material with a negative surface charge. The in vitro drug release characteristics of the microspheres and the composite scaffold material were evaluated; the in vivo drug release profile of the composite scaffold material implanted in a rat muscle pouch was evaluated using high-performance liquid chromatography. The biochemical parameters of the serum and liver histopathologies of the rats receiving the transplantation were observed to assess the biocompatibility of the composite scaffold material.

RESULTSThe encapsulation efficiency and drug loading efficiency of microspheres were (56.05±5.33)% and (29.80±2.88)%, respectively. The cumulative drug release rate of the microspheres in vitro was (94.19±5.4)% at 28 days, as compared with the rate of (82.23±6.28)% of composite scaffold material. The drug-loaded composite scaffold material showed a good performance of in vivo drug release in rats, and the local drug concentration still reached 16.18±0.35 µg/g at 28 days after implantation. Implantation of the composite scaffold material resulted in transient and reversible liver injury, which was fully reparred at 28 days after the implantation.

CONCLUSIONThe composite scaffold material possesses a good sustained drug release capacity and a good biocompatibility, and can serve as an alternative approach to conventional antituberculous chemotherapy.

Animals ; Biocompatible Materials ; chemistry ; Delayed-Action Preparations ; Drug Carriers ; chemistry ; Drug Liberation ; Lactic Acid ; chemistry ; Microspheres ; Polyglycolic Acid ; chemistry ; Rats ; Rifampin ; administration & dosage

Nonhuman primates are increasingly used in biomedical research since they are highly homologous to humans compared to other rodent animals. However, there is limited reliable reference data of the clinical pathology parameters in cynomolgus monkeys, and in particular, only some coagulation and urinalysis parameters have been reported. Here, we reported the reference data of clinical chemical, hematological, blood coagulation, and urinalysis parameters in cynomolgus monkeys. The role of sex differences was analyzed and several parameters (including hematocrit, hemoglobin, red blood cell, blood urea nitrogen, total bilirubin, alkaline phosphatase, creatinine kinase, gamma-glutamyl tranferase, and lactate dehydrogenase) significantly differed between male and female subjects. In addition, compared to previous study results, lactate dehydrogenase, creatinine kinase, and aspartate aminotransferase showed significant variation. Interstudy differences could be affected by several factors, including age, sex, geographic origin, presence/absence of anesthetics, fasting state, and the analytical methods used. Therefore, it is important to deliberate with the overall reference indices. In conclusion, the current study provides a comprehensive and updated reference data of the clinical pathology parameters in cynomolgus monkeys and provides improved assessment criteria for evaluating preclinical studies or biomedical research.
Alkaline Phosphatase ; Anesthetics ; Animals ; Aspartate Aminotransferases ; Bilirubin ; Blood Coagulation ; Blood Urea Nitrogen ; Chemistry, Clinical ; Creatinine ; Erythrocytes ; Fasting ; Female ; Hematocrit ; Hematology ; Humans ; L-Lactate Dehydrogenase ; Lactic Acid ; Macaca fascicularis* ; Male ; Pathology, Clinical* ; Phosphotransferases ; Primates ; Reference Values* ; Rodentia ; Sex Characteristics ; Urinalysis

OBJECTIVETo evaluate the effect of 2-methacryloyloxyethyl phosphorylcholine (MPC) and nanoparticles of amorphous calcium phosphate (NACP) on the protein-repellent property of dental adhesive.

METHODSMPC and NACP were incorporated into SBMP as the test group. Scotchbond Multi-Purpose (SBMP) was used as control group. Human dentin shear bond strengths were measured. Protein adsorption onto samples was determined by micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm viability.

RESULTSThe dentin bond strength of modified group was (28.7±2.2) MPa, which was not significantly different from that of the SBMP control group. The amount of protein adsorption in the modified group and the SBMP control group were (0.21±0.02) µg/cm(2) and (4.17±0.45) µg/cm(2) respectively. Lactic acid production of biofilms in modified group and SBMP control were (7.71 ± 1.01) mmol/L and (19.18 ± 2.34) mmol/L repectively.

CONCLUSIONSMPC-NACP based dental adhesive greatly reduce the protein adsorption and bacterial adhesion, without compromising dentin shear bond strength. This novel bonding agent may have wide application.

Adsorption ; Biofilms ; drug effects ; growth & development ; Calcium Phosphates ; pharmacology ; Dental Cements ; pharmacology ; Dental Plaque ; Dentin ; chemistry ; Humans ; Lactic Acid ; biosynthesis ; Methacrylates ; pharmacology ; Nanoparticles ; Phosphorylcholine ; analogs & derivatives ; pharmacology ; Resin Cements ; pharmacology ; Saliva ; Tensile Strength

The effect of surface charges on the cellular uptake rate and drug release profile of tetrandrine-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (TPNs) was studied. Stabilizer-free nanoprecipitation method was used in this study for the synthesis of TPNs. A typical layer-by-layer approach was applied for multi-coating particles' surface with use of poly(styrene sulfonate) sodium salt (PSS) as anionic layer and poly(allylamine hydrochloride) (PAH) as cationic layer. The modified TPNs were characterized by different physicochemical techniques such as Zeta sizer, scanning electron microscopy and transmission electron microscopy. The drug loading efficiency, release profile and cellular uptake rate were evaluated by high performance liquid chromatography and confocal laser scanning microscopy, respectively. The resultant PSS/PAH/PSS/PAH/TPNs (4 layers) exhibited spherical-shaped morphology with the average size of 160.3±5.165 nm and zeta potential of-57.8 mV. The encapsulation efficiency and drug loading efficiency were 57.88% and 1.73%, respectively. Multi-layer coating of polymeric materials with different charges on particles' surface could dramatically influence the drug release profile of TPNs (4 layers vs. 3 layers). In addition, variable layers of surface coating could also greatly affect the cellular uptake rate of TPNs in A549 cells within 8 h. Overall, by coating particles' surface with those different charged polymers, precise control of drug release as well as cellular uptake rate can be achieved simultaneously. Thus, this approach provides a new strategy for controllable drug delivery.
Antineoplastic Agents, Phytogenic ; administration & dosage ; chemistry ; Benzylisoquinolines ; administration & dosage ; chemistry ; Cell Line, Tumor ; Drug Liberation ; Humans ; Lactic Acid ; chemistry ; Nanoparticles ; adverse effects ; chemistry ; metabolism ; Polyamines ; chemistry ; Polyglycolic Acid ; chemistry ; Polystyrenes ; chemistry ; Static Electricity

Poly lactic acid (PLA)/Poly (butyleneadipate-co-terephthalate)(PBAT) and glyceryl triacetate (GTA) blend were prepared by torque rheometer, and the effect of GTA on thermodynamical performance, mechanical properties and microstructure of PLA/PBAT composites were studied using differential scanning calorimeter(DSC), dynamic mechanical analysis(DMA), universal testing machine, impact testing machine and scanning electron microscope(SEM). After adding GTA, Tg values of the two phases gradually became closer, blends cold crystallization temperature and melting temperature decreased. When with 3 phr GTA, the dispersed phase particle size of PLA/PBAT blend decreased. Mechanics performance test showed that the elongation at break and impact strength of the PLA/PBAT blend was greatly increased with 3 phr GTA, and the elongation at break increased 2.6 times, improved from 17.7% to 64.1%.
Acetates ; chemistry ; Calorimetry, Differential Scanning ; Crystallization ; Lactic Acid ; Polyesters ; chemistry ; Polymers ; Temperature

Poly (lactic acid) (PLA) is a polymer synthesized from lactic acid with good biocompatibility and biodegradability. At present, PLA manufactured on industrial scale is mainly synthesized from L-lactic acid. The obtained products have good transparency but poor heat resistance. Adding nucleating agents could increase the crystallinity of PLA, to improve heat resistance. We reviewed the progress of research on organic and inorganic nucleating agents that can be used for PLA synthesis.
Chemical Industry ; Lactic Acid ; Polyesters ; chemistry ; Polymers