Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

BACKGROUND: Exosomes, nano-sized vesicles ranging between 30 and 150 nm secreted by human cells, play a pivotal role in long-range intercellular communication and have attracted significant attention in the field of regenerative medicine. Nevertheless, their limited productivity and cost-effectiveness pose challenges for clinical applications. These issues have recently been addressed by cell-derived nanovesicles (CDNs), which are physically synthesized exosome-mimetic nanovesicles from parent cells, as a promising alternative to exosomes. CDNs exhibit structural, physical, and biological properties similar to exosomes, containing intracellular protein and genetic components encapsulated by the cell plasma membrane. These characteristics allow CDNs to be used as regenerative medicine and therapeutics on their own, or as a drug delivery system. METHODS: The paper reviews diverse methods for CDN synthesis, current analysis techniques, and presents engineering strategies to improve lesion targeting efficiency and/or therapeutic efficacy. RESULTS: CDNs, with their properties similar to those of exosomes, offer a cost-effective and highly productive alternative due to their non-living biomaterial nature, nano-size, and readiness for use, allowing them to overcome several limitations of conventional cell therapy methods. CONCLUSION Ongoing research and enhancement of CDNs engineering, along with comprehensive safety assessments and stability analysis, exhibit vast potential to advance regenerative medicine by enabling the development of efficient therapeutic interventions.

Patellofemoral joint problems refer to a spectrum of conditions affecting the patellofemoral joint, which is the joint between the patella and femur. These conditions can cause pain and instability in the knee and affect an individual’s ability to perform daily activities. Patellofemoral joint problems commonly cause knee pain, particularly among young athletes and physically active individuals. This review article discusses current patellofemoral joint problems, including their epidemiology, pathophysiology, diagnosis, and management.Current Concepts: Patellofemoral joint problems are presented as clinical symptoms of pain and instability. Dividing the diagnostic criteria into anterior knee pain, patella instability, and patellofemoral arthritis is useful. Anterior knee pain is diagnosed after excluding possible causes. Patellar instability is classified into recurrent dislocation, habitual dislocation (extension and flexion types), and permanent dislocation. Moreover, patellar instability can progress to the final stage of patellofemoral arthritis. Thus, patellar instability should be treated according to the Dejour criterion, and patellofemoral arthritis treatment requires artificial joint replacement surgery.Discussion and Conclusion: The pathological mechanism of patellofemoral joint problems still needs to be properly established, and multifactorial causes make it difficult to treat patellofemoral joint problems. Accurate diagnosis is considered an essential factor for successful treatment.

Objective: To compare the convenience and effectiveness of the existing lumbosacral orthoses (LSO) (classic LSO and Cybertech) and a newly developed LSO (V-LSO) by analyzing postoperative data. Methods: This prospective cohort study was performed from May 2019 to November 2019 and enrolled and analyzed 88 patients with degenerative lumbar spine disease scheduled for elective lumbar surgery. Three types of LSO that were provided according to the time of patient registration were applied for 6 weeks. Patients were randomized into the classic LSO group (n=31), Cybertech group (n=26), and V-LSO group (n=31). All patients were assessed using the Oswestry Disability Index (ODI) preoperatively and underwent plain lumbar radiography (anteroposterior and lateral views) 10 days postoperatively. Lumbar lordosis (LS angle) and frontal imbalance were measured with and without LSO. At the sixth postoperative week, a follow-up assessment with the ODI and orthosis questionnaire was conducted. Results: No significant differences were found among the three groups in terms of the LS angle, frontal imbalance, ODI, and orthosis questionnaire results. When the change in the LS angle and frontal imbalance toward the reference value was defined as a positive change with and without LSO, the rate of positive change was significantly different in the V-LSO group (LS angle: 41.94% vs. 61.54% vs. 83.87%; p=0.003). Conclusion The newly developed LSO showed no difference regarding its effectiveness and compliance when compared with the existing LSO, but it was more effective in correcting lumbar lordosis.

Methods: Total 179 normal, asymptomatic Korean men were divided in to three groups (6th, 7th, and 8th decade) according to their age. Standard sagittal spinopelvic parameters, including TK and thoracolumbar kyphosis, were measured and subdivided into the following four segments: A (C7 upper end plate [UEP]–T5 UEP), B (T5 UEP–T10 UEP), C (T10 UEP–T12 lower end plate [LEP]), and D (T12 LEP–L2 LEP). These segments of the three study groups were analyzed. Results: In segment B, the segmental kyphosis of group 3 (20.2°±8.0°) showed a statistically larger value than that of group 1 (15.6°±6.8°) and group 2 (16.7°±8.8°) (p=0.017). In segment C, the segmental kyphosis of group 2 (12.9°±6.5°) and group 3 (12.2°±7.1°) showed statistically larger values than that of group 1 (9.5°±6.2°) (p=0.016). The A and D segments of the three groups were not significantly different. Conclusions Increased TK was observed in the middle (segment B) and lower (segment C) thoracic segments in normal asymptomatic male subjects with age. The results from the natural progression of segmental kyphosis with age would provide baseline reference data to help surgeons choose the optimal point of the upper instrumented vertebra level for preventing proximal junctional kyphosis.

BACKGROUND: Pathologic diagnosis of central nervous system (CNS) neoplasms is made by comparing light microscopic, immunohistochemical, and molecular cytogenetic findings with clinicoradiologic observations. Intraoperative frozen cytology smears can improve the diagnostic accuracy for CNS neoplasms. Here, we evaluate the diagnostic value of cytology in frozen diagnoses of CNS neoplasms. METHODS: Cases were selected from patients undergoing both frozen cytology and frozen sections. Diagnostic accuracy was evaluated. RESULTS: Four hundred and fifty-four cases were included in this retrospective single-center review study covering a span of 10 years. Five discrepant cases (1.1%) were found after excluding 53 deferred cases (31 cases of tentative diagnosis, 22 cases of inadequate frozen sampling). A total of 346 cases of complete concordance and 50 cases of partial concordance were classified as not discordant cases in the present study. Diagnostic accuracy of intraoperative frozen diagnosis was 87.2%, and the accuracy was 98.8% after excluding deferred cases. Discrepancies between frozen and permanent diagnoses (n = 5, 1.1%) were found in cases of nonrepresentative sampling (n = 2) and misinterpretation (n = 3). High concordance was observed more frequently in meningeal tumors (97/98, 99%), metastatic brain tumors (51/52, 98.1%), pituitary adenomas (86/89, 96.6%), schwannomas (45/47, 95.8%), high-grade astrocytic tumors (47/58, 81%), low grade astrocytic tumors (10/13, 76.9%), non-neoplastic lesions (23/36, 63.9%), in decreasing frequency. CONCLUSIONS: Using intraoperative cytology and frozen sections of CNS tumors is a highly accurate diagnostic ancillary method, providing subtyping of CNS neoplasms, especially in frequently encountered entities.
Brain Neoplasms ; Central Nervous System Neoplasms ; Central Nervous System ; Cytogenetics ; Diagnosis ; Frozen Sections ; Humans ; Meningeal Neoplasms ; Methods ; Neurilemmoma ; Pituitary Neoplasms ; Retrospective Studies

PURPOSE: This study aims to evaluate the loosening torque on the implant fixture, and to assess the accuracy of difference electronic torque drivers.MATERIALS AND METHODS: Three electronic torque drivers were used to measure the loosening torque on the implant system (AnyOne; MegaGen). The implant fixtures were divided among the 3 electronic torque driver types (W&H, SAESHIN, and NSK group) and 9 for each group. The screws were fastened at the implant fixture by three electronic torque drivers using the tightening torques recommended by the manufacturers of the drivers. After 10 minutes, the screws were again fastened at the implant fixture with equal torque. Then, the loosening torques were measured with an MGT12 torque gauge (MARK-10, Inc.). This measurement procedure was repeated 10 times under loosening torques of 15 Ncm, 25 Ncm, and 35 Ncm. In the statistical analysis, all values of loosening torque were analyzed with the one-way ANOVA and Kruskal-Wallis test (α=.05) for comparative evaluation.RESULTS: There were significant inter-group differences at loosening torques of 15 Ncm and 25 Ncm (P<.05). The accuracy of the NSK driver was the highest, followed by SAESHIN and W&H. There was no significant difference between NSK and W&H at 35 Ncm (P>.05). The SAESHIN driver showed the closest loosening torque at 35 Ncm.CONCLUSION: The most accurate loosening torques were SAESHIN at 35 Ncm, and NSK at 15 Ncm and 25 Ncm. Since the loosening torque may vary depending on the tightening torques and electronic torque drivers, periodic calibration of the electronic torque driver is recommended.
Calibration ; Torque

BACKGROUND/AIMS: We investigated the time taken for patients with metastatic non-small cell lung cancer (NSCLC) to develop brain metastases (BM), as well as their subsequent overall median survival following diagnosis, considering the epidermal growth factor receptor (EGFR) mutational status. METHODS: We retrospectively investigated the medical records of 259 patients diagnosed with advanced NSCLC from January 2010 to August 2013, who were tested for EGFR mutations. The time from the diagnosis of advanced NSCLC to the development of BM and the overall median survival after BM development (BM-OS) were evaluated and compared by EGFR mutational status. RESULTS: Sixty-seven patients (25.9%) developed BM. Synchronous BM occurred more often in patients with EGFR mutation type (MT) (n = 20, 27.4%) compared with EGFR wild type (WT) (n = 27, 14.5%, p < 0.009). The median BM-OS was significantly longer in patients with EGFR MT than in those with EGFR WT (25.7 months vs. 3.8 months, p < 0.001), and a similar trend was noticed for patients with synchronous BM (25.7 months for EGFR MT vs. 6.8 months for EGFR WT, p < 0.001). However, in patients with metachronous BM development, the difference in BM-OS between patients with EGFR MT (14.6 months) and EGFR WT (2.5 months) did not reach statistical significance (p = 0.230). CONCLUSIONS Synchronous BM was more common in NSCLC patients with EGFR MT than in those with EGFR WT. However, EGFR mutations were associated with significantly longer median BM-OS, especially when the brain was the first metastatic site.