Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Hepatocellular carcinoma (HCC) is one of the most lethal malignancies worldwide, with poor prognosis owing to its high frequency of recurrence and metastasis. Moreover, most patients are diagnosed at an advanced stage owing to a lack of early detection markers. Exosomes, which are characterized by their cargos of stable intracellular messengers, such as DNA, RNA, proteins, and lipids, play a crucial role in regulating cell differentiation and HCC development. Recently, exosomal noncoding RNAs (ncRNAs), including microRNAs, long ncRNAs, and circular RNAs, have become increasingly important diagnostic, prognostic, and predictive markers of HCC. Herein, we discuss the clinical implications of exosomal ncRNAs, specifically those within the HCC regulatory network.

Purpose: This study investigated epidemiologic features of patients with pancreatic cancer in Korea, according to the histologic subtypes. Methods: The Korea Central Cancer Registry data on patients with pancreatic cancer from 1999 to 2019 were reviewed. The 101,446 patients with pancreatic cancer (C25 based on the International Classification of Diseases, 10th revision) were allocated according to the following morphological codes: A, endocrine; B, carcinoma excluding cystic and mucinous; C, cystic or mucinous; D, acinar cell; and E, sarcoma and soft tissue tumor. Results: The distribution of each pancreatic cancer subtype group in Korea from 1999 to 2019 was as follows: A, n = 3,101 (3.1%); B, n = 95,051 (93.7%); C, n = 2,856 (2.8%); D, n = 299 (0.3%); and E, n = 139 (0.1%). In group B, 49.2% of patients were aged >70 years, and half of them did not receive treatment within 4 months of diagnosis. In addition, only 30.9% of the patients were in the localized and regional stage in which surgical treatment was possible. Pancreatic cancer occurred more frequently in females than in males only in group C. Between 1999 and 2019, the average annual percentage changes in the age-specific incidence rates were positive in groups A (13.9%, P < 0.001), B (1.0%, P < 0.001), and C (6.5%, P = 0.025). Significant improvements in 5-year survival rates over time were observed in subtypes A, B, and C. Conclusion The subgroups of pancreatic cancer show different epidemiologic features, including incidences, treatment rates, and prognoses.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Hepatocellular carcinoma (HCC) is one of the most lethal malignancies worldwide, with poor prognosis owing to its high frequency of recurrence and metastasis. Moreover, most patients are diagnosed at an advanced stage owing to a lack of early detection markers. Exosomes, which are characterized by their cargos of stable intracellular messengers, such as DNA, RNA, proteins, and lipids, play a crucial role in regulating cell differentiation and HCC development. Recently, exosomal noncoding RNAs (ncRNAs), including microRNAs, long ncRNAs, and circular RNAs, have become increasingly important diagnostic, prognostic, and predictive markers of HCC. Herein, we discuss the clinical implications of exosomal ncRNAs, specifically those within the HCC regulatory network.

Purpose: The optimal reconstruction method following distal gastrectomy has not been elucidated. Since Billroth-II (B-II) reconstruction is commonly associated with increased bile reflux, Braun jejunojejunostomy has been proposed to reduce this complication. Materials and Methods: We retrospectively analyzed 325 patients with gastric cancer who underwent distal gastrectomy with B-II reconstruction between January 2015 and December 2017, comprising 159 patients without Braun anastomosis and 166 with Braun anastomosis.Outcomes were assessed over three years using annual gastroscopy based on the residual food, gastritis, and bile reflux criteria and the Los Angeles classification for reflux esophagitis. Results: In the first postoperative year, the group with Braun anastomosis showed a significant reduction in bile reflux compared to the group without Braun anastomosis (75.9% vs. 86.2%; P=0.019). Moreover, multivariate analysis identified Braun anastomosis as the sole factor associated with this outcome. Additionally, the group with Braun anastomosis had a lower incidence of heartburn (12.0% vs. 20.1%; P=0.047) and reduced use of prokinetics (P<0.001) and acid reducers (P=0.002) compared to the group without Braun anastomosis.However, these benefits diminished in subsequent years, with no significant differences in residual food, gastritis, or reflux esophagitis between the groups. Both groups showed similar body mass index scores and nutritional outcomes over the 3-year follow-up period. Conclusions Although Braun anastomosis offers short-term benefits in reducing bile reflux after B-II reconstruction, these effects are not sustainable. The routine use of Braun anastomosis should be reconsidered, though either approach remains a viable option depending on the patient’s circumstances.