Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background: Inhibitory effects of denosumab on bone remodeling are reversible and disappear once treatment is discontinued. Herein, we examined whether and to what extent delayed denosumab administration is also associated with fracture risk using nation-wide data. Methods: The study cohort included women aged 45 to 89 years who were started on denosumab for osteoporosis between October 2017 and December 2019 using data from the Korean Health Insurance Review and Assessment service. Participants were stratified according to the time of their subsequent denosumab administration from the last denosumab administration, including those with within 30 days early dosing (ED30), within the planned time of 180–210 days (referent), within 30–90 days of delayed dosing (DD90), within 90–180 days of delayed dosing (DD180), and longer than 181 days of delayed dosing (DD181+). The primary outcome was the incidence of all clinical fractures. Results: A total of 149,199 participants included and 2,323 all clinical fractures (including 1,223 vertebral fractures) occurred. The incidence of all fractures was significantly higher in the DD90 compared to reference group (hazard ratio [HR], 1.2; 95% confidence interval [CI], 1.1 to 1.4). The risk of all fracture was even higher in the longer delayed DD180 group (HR, 1.9; 95% CI, 1.6 to 2.3) and DD181+ group (HR, 1.8; 95% CI, 1.5 to 2.2). Increased risks of fractures with delayed dosing were consistently observed for vertebral fractures. Conclusion Delayed denosumab dosing, even by 1 to 3 months, was significantly associated with increased fracture risk. Maintaining the correct dosing schedule should be emphasized when starting denosumab.

Purpose: To report a case of suprasellar Rathke's cleft cyst accompanying visual field defect found in a patient complaining of decreased visual acuity after cataract surgery.Case Summary: A 62-year-old male patient who showed a best-corrected visual acuity (BCVA) of 0.6 after left eye cataract surgery visited our hospital two months after surgery with decreased vision. He showed a best corrected visual acuity of 0.2, did not have relative afferent pupillary defect, and there were no specific findings on fundus examination. In the full field perimetry test, partial visual field loss in superior temporal quadrants were found in both eyes, being more prominent in left eye. In ganglion cell layer measurements using optical coherence tomography, a symmetric thinning in the thickness of the nasal ganglion cell layer was observed in both eyes, which was consistent with the visual field test. It was discovered that a liquid solid mass with a diameter of 21 mm in the upper part of the pituitary gland was compressing the optic chiasm in orbit magnetic resonance imaging. The patient was then referred to neurosurgery for pituitary surgery using transsphenoidal approach and diagnosed with Rathke's cleft cyst on histopathologic examination. Three months after surgery, the BCVA has increased to 0.5 and the visual field test showed no scotoma. Conclusions We report a case that Rathke's cleft cyst above the sella turcica inducing visual disturbances, emphasizing the importance of early detection and treatment through neuroophthalmological evaluation in a patient presenting with unexplained visual impairment.

Background: Inhibitory effects of denosumab on bone remodeling are reversible and disappear once treatment is discontinued. Herein, we examined whether and to what extent delayed denosumab administration is also associated with fracture risk using nation-wide data. Methods: The study cohort included women aged 45 to 89 years who were started on denosumab for osteoporosis between October 2017 and December 2019 using data from the Korean Health Insurance Review and Assessment service. Participants were stratified according to the time of their subsequent denosumab administration from the last denosumab administration, including those with within 30 days early dosing (ED30), within the planned time of 180–210 days (referent), within 30–90 days of delayed dosing (DD90), within 90–180 days of delayed dosing (DD180), and longer than 181 days of delayed dosing (DD181+). The primary outcome was the incidence of all clinical fractures. Results: A total of 149,199 participants included and 2,323 all clinical fractures (including 1,223 vertebral fractures) occurred. The incidence of all fractures was significantly higher in the DD90 compared to reference group (hazard ratio [HR], 1.2; 95% confidence interval [CI], 1.1 to 1.4). The risk of all fracture was even higher in the longer delayed DD180 group (HR, 1.9; 95% CI, 1.6 to 2.3) and DD181+ group (HR, 1.8; 95% CI, 1.5 to 2.2). Increased risks of fractures with delayed dosing were consistently observed for vertebral fractures. Conclusion Delayed denosumab dosing, even by 1 to 3 months, was significantly associated with increased fracture risk. Maintaining the correct dosing schedule should be emphasized when starting denosumab.

Background: Inhibitory effects of denosumab on bone remodeling are reversible and disappear once treatment is discontinued. Herein, we examined whether and to what extent delayed denosumab administration is also associated with fracture risk using nation-wide data. Methods: The study cohort included women aged 45 to 89 years who were started on denosumab for osteoporosis between October 2017 and December 2019 using data from the Korean Health Insurance Review and Assessment service. Participants were stratified according to the time of their subsequent denosumab administration from the last denosumab administration, including those with within 30 days early dosing (ED30), within the planned time of 180–210 days (referent), within 30–90 days of delayed dosing (DD90), within 90–180 days of delayed dosing (DD180), and longer than 181 days of delayed dosing (DD181+). The primary outcome was the incidence of all clinical fractures. Results: A total of 149,199 participants included and 2,323 all clinical fractures (including 1,223 vertebral fractures) occurred. The incidence of all fractures was significantly higher in the DD90 compared to reference group (hazard ratio [HR], 1.2; 95% confidence interval [CI], 1.1 to 1.4). The risk of all fracture was even higher in the longer delayed DD180 group (HR, 1.9; 95% CI, 1.6 to 2.3) and DD181+ group (HR, 1.8; 95% CI, 1.5 to 2.2). Increased risks of fractures with delayed dosing were consistently observed for vertebral fractures. Conclusion Delayed denosumab dosing, even by 1 to 3 months, was significantly associated with increased fracture risk. Maintaining the correct dosing schedule should be emphasized when starting denosumab.