1.Sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome: a comparative study of 2018–2019 and 2020–2021
Kyeong-Hyeon CHUN ; Hyun-Jin KIM ; Dae Ryong KANG ; Jang Young KIM ; Wonjin KIM ; Yong Whi JEONG ; Seung Hwan HAN ; Kwang Kon KOH ;
The Korean Journal of Internal Medicine 2025;40(2):262-274
Background/Aims:
The coronavirus disease 2019 (COVID-19) pandemic has significantly impacted global health, exacerbated metabolic health issues, and altered lifestyle behaviors. This study examined the sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome using data from the Korea National Health and Nutrition Examination Survey (KNHANES).
Methods:
Data from the KNHANES VII (2018) and VIII (2019–2021), including 15,499 participants, were analyzed. The study population was stratified by sex, and further subdivisions were conducted based on the timeframe relative to the COVID-19 outbreak. Variables such as age, education level, household income, smoking status, and high-risk drinking were analyzed to assess their influence on the prevalence of metabolic syndrome.
Results:
The overall prevalence of metabolic syndrome significantly increased from 28.11% before the outbreak to 29.69% after the outbreak. Both males and females reported significant increases in waist circumference and fasting glucose levels. Age and education level differentially influenced the prevalence of metabolic syndrome between the sex. Smoking was significantly associated with increased prevalence in males, whereas high-risk drinking was associated with increased prevalence in males and decreased prevalence in females.
Conclusions
The COVID-19 pandemic has significantly increased the prevalence of metabolic syndrome with notable sex-specific differences. These findings highlight the need for sex-specific public health interventions to mitigate the impact of the pandemic on metabolic health.
2.Sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome: a comparative study of 2018–2019 and 2020–2021
Kyeong-Hyeon CHUN ; Hyun-Jin KIM ; Dae Ryong KANG ; Jang Young KIM ; Wonjin KIM ; Yong Whi JEONG ; Seung Hwan HAN ; Kwang Kon KOH ;
The Korean Journal of Internal Medicine 2025;40(2):262-274
Background/Aims:
The coronavirus disease 2019 (COVID-19) pandemic has significantly impacted global health, exacerbated metabolic health issues, and altered lifestyle behaviors. This study examined the sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome using data from the Korea National Health and Nutrition Examination Survey (KNHANES).
Methods:
Data from the KNHANES VII (2018) and VIII (2019–2021), including 15,499 participants, were analyzed. The study population was stratified by sex, and further subdivisions were conducted based on the timeframe relative to the COVID-19 outbreak. Variables such as age, education level, household income, smoking status, and high-risk drinking were analyzed to assess their influence on the prevalence of metabolic syndrome.
Results:
The overall prevalence of metabolic syndrome significantly increased from 28.11% before the outbreak to 29.69% after the outbreak. Both males and females reported significant increases in waist circumference and fasting glucose levels. Age and education level differentially influenced the prevalence of metabolic syndrome between the sex. Smoking was significantly associated with increased prevalence in males, whereas high-risk drinking was associated with increased prevalence in males and decreased prevalence in females.
Conclusions
The COVID-19 pandemic has significantly increased the prevalence of metabolic syndrome with notable sex-specific differences. These findings highlight the need for sex-specific public health interventions to mitigate the impact of the pandemic on metabolic health.
3.Additional Screw Added to the Femoral Neck System Could Enhance the Stability of Pauwel Type III Femoral Neck Fractures:a Finite Element Analysis
Yonghan CHA ; Sunghoon PARK ; Chang-Ho JUNG ; Jin-Woo KIM ; Jun-Il YOO ; Jung-Taek KIM ; Yongho JEON ; Kyeong Jin HAN
Clinics in Orthopedic Surgery 2025;17(2):204-215
Background:
This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS).
Methods:
Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied.
Results:
With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions.
Conclusions
The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.
4.Sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome: a comparative study of 2018–2019 and 2020–2021
Kyeong-Hyeon CHUN ; Hyun-Jin KIM ; Dae Ryong KANG ; Jang Young KIM ; Wonjin KIM ; Yong Whi JEONG ; Seung Hwan HAN ; Kwang Kon KOH ;
The Korean Journal of Internal Medicine 2025;40(2):262-274
Background/Aims:
The coronavirus disease 2019 (COVID-19) pandemic has significantly impacted global health, exacerbated metabolic health issues, and altered lifestyle behaviors. This study examined the sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome using data from the Korea National Health and Nutrition Examination Survey (KNHANES).
Methods:
Data from the KNHANES VII (2018) and VIII (2019–2021), including 15,499 participants, were analyzed. The study population was stratified by sex, and further subdivisions were conducted based on the timeframe relative to the COVID-19 outbreak. Variables such as age, education level, household income, smoking status, and high-risk drinking were analyzed to assess their influence on the prevalence of metabolic syndrome.
Results:
The overall prevalence of metabolic syndrome significantly increased from 28.11% before the outbreak to 29.69% after the outbreak. Both males and females reported significant increases in waist circumference and fasting glucose levels. Age and education level differentially influenced the prevalence of metabolic syndrome between the sex. Smoking was significantly associated with increased prevalence in males, whereas high-risk drinking was associated with increased prevalence in males and decreased prevalence in females.
Conclusions
The COVID-19 pandemic has significantly increased the prevalence of metabolic syndrome with notable sex-specific differences. These findings highlight the need for sex-specific public health interventions to mitigate the impact of the pandemic on metabolic health.
5.Sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome: a comparative study of 2018–2019 and 2020–2021
Kyeong-Hyeon CHUN ; Hyun-Jin KIM ; Dae Ryong KANG ; Jang Young KIM ; Wonjin KIM ; Yong Whi JEONG ; Seung Hwan HAN ; Kwang Kon KOH ;
The Korean Journal of Internal Medicine 2025;40(2):262-274
Background/Aims:
The coronavirus disease 2019 (COVID-19) pandemic has significantly impacted global health, exacerbated metabolic health issues, and altered lifestyle behaviors. This study examined the sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome using data from the Korea National Health and Nutrition Examination Survey (KNHANES).
Methods:
Data from the KNHANES VII (2018) and VIII (2019–2021), including 15,499 participants, were analyzed. The study population was stratified by sex, and further subdivisions were conducted based on the timeframe relative to the COVID-19 outbreak. Variables such as age, education level, household income, smoking status, and high-risk drinking were analyzed to assess their influence on the prevalence of metabolic syndrome.
Results:
The overall prevalence of metabolic syndrome significantly increased from 28.11% before the outbreak to 29.69% after the outbreak. Both males and females reported significant increases in waist circumference and fasting glucose levels. Age and education level differentially influenced the prevalence of metabolic syndrome between the sex. Smoking was significantly associated with increased prevalence in males, whereas high-risk drinking was associated with increased prevalence in males and decreased prevalence in females.
Conclusions
The COVID-19 pandemic has significantly increased the prevalence of metabolic syndrome with notable sex-specific differences. These findings highlight the need for sex-specific public health interventions to mitigate the impact of the pandemic on metabolic health.
6.Additional Screw Added to the Femoral Neck System Could Enhance the Stability of Pauwel Type III Femoral Neck Fractures:a Finite Element Analysis
Yonghan CHA ; Sunghoon PARK ; Chang-Ho JUNG ; Jin-Woo KIM ; Jun-Il YOO ; Jung-Taek KIM ; Yongho JEON ; Kyeong Jin HAN
Clinics in Orthopedic Surgery 2025;17(2):204-215
Background:
This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS).
Methods:
Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied.
Results:
With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions.
Conclusions
The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.
7.Additional Screw Added to the Femoral Neck System Could Enhance the Stability of Pauwel Type III Femoral Neck Fractures:a Finite Element Analysis
Yonghan CHA ; Sunghoon PARK ; Chang-Ho JUNG ; Jin-Woo KIM ; Jun-Il YOO ; Jung-Taek KIM ; Yongho JEON ; Kyeong Jin HAN
Clinics in Orthopedic Surgery 2025;17(2):204-215
Background:
This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS).
Methods:
Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied.
Results:
With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions.
Conclusions
The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.
8.Additional Screw Added to the Femoral Neck System Could Enhance the Stability of Pauwel Type III Femoral Neck Fractures:a Finite Element Analysis
Yonghan CHA ; Sunghoon PARK ; Chang-Ho JUNG ; Jin-Woo KIM ; Jun-Il YOO ; Jung-Taek KIM ; Yongho JEON ; Kyeong Jin HAN
Clinics in Orthopedic Surgery 2025;17(2):204-215
Background:
This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS).
Methods:
Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied.
Results:
With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions.
Conclusions
The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.
9.Sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome: a comparative study of 2018–2019 and 2020–2021
Kyeong-Hyeon CHUN ; Hyun-Jin KIM ; Dae Ryong KANG ; Jang Young KIM ; Wonjin KIM ; Yong Whi JEONG ; Seung Hwan HAN ; Kwang Kon KOH ;
The Korean Journal of Internal Medicine 2025;40(2):262-274
Background/Aims:
The coronavirus disease 2019 (COVID-19) pandemic has significantly impacted global health, exacerbated metabolic health issues, and altered lifestyle behaviors. This study examined the sex-specific impact of the COVID-19 outbreak on the incidence of metabolic syndrome using data from the Korea National Health and Nutrition Examination Survey (KNHANES).
Methods:
Data from the KNHANES VII (2018) and VIII (2019–2021), including 15,499 participants, were analyzed. The study population was stratified by sex, and further subdivisions were conducted based on the timeframe relative to the COVID-19 outbreak. Variables such as age, education level, household income, smoking status, and high-risk drinking were analyzed to assess their influence on the prevalence of metabolic syndrome.
Results:
The overall prevalence of metabolic syndrome significantly increased from 28.11% before the outbreak to 29.69% after the outbreak. Both males and females reported significant increases in waist circumference and fasting glucose levels. Age and education level differentially influenced the prevalence of metabolic syndrome between the sex. Smoking was significantly associated with increased prevalence in males, whereas high-risk drinking was associated with increased prevalence in males and decreased prevalence in females.
Conclusions
The COVID-19 pandemic has significantly increased the prevalence of metabolic syndrome with notable sex-specific differences. These findings highlight the need for sex-specific public health interventions to mitigate the impact of the pandemic on metabolic health.
10.Current Status of Flow Cytometric Immunophenotyping of Hematolymphoid Neoplasms in Korea
Mikyoung PARK ; Jihyang LIM ; Ari AHN ; Eun-Jee OH ; Jaewoo SONG ; Kyeong-Hee KIM ; Jin-Yeong HAN ; Hyun-Woo CHOI ; Joo-Heon PARK ; Kyung-Hwa SHIN ; Hyerim KIM ; Miyoung KIM ; Sang-Hyun HWANG ; Hyun-Young KIM ; Duck CHO ; Eun-Suk KANG
Annals of Laboratory Medicine 2024;44(3):222-234
Background:
Flow cytometric immunophenotyping of hematolymphoid neoplasms (FCIHLN) is essential for diagnosis, classification, and minimal residual disease (MRD) monitoring. FCI-HLN is typically performed using in-house protocols, raising the need for standardization. Therefore, we surveyed the current status of FCI-HLN in Korea to obtain fundamental data for quality improvement and standardization.
Methods:
Eight university hospitals actively conducting FCI-HLN participated in our survey.We analyzed responses to a questionnaire that included inquiries regarding test items, reagent antibodies (RAs), fluorophores, sample amounts (SAs), reagent antibody amounts (RAAs), acquisition cell number (ACN), isotype control (IC) usage, positiveegative criteria, and reporting.
Results:
Most hospitals used acute HLN, chronic HLN, plasma cell neoplasm (PCN), and MRD panels. The numbers of RAs were heterogeneous, with a maximum of 32, 26, 12, 14, and 10 antibodies used for acute HLN, chronic HLN, PCN, ALL-MRD, and multiple myeloma-MRD, respectively. The number of fluorophores ranged from 4 to 10. RAs, SAs, RAAs, and ACN were diverse. Most hospitals used a positive criterion of 20%, whereas one used 10% for acute and chronic HLN panels. Five hospitals used ICs for the negative criterion. Positiveegative assignments, percentages, and general opinions were commonly reported. In MRD reporting, the limit of detection and lower limit of quantification were included.
Conclusions
This is the first comprehensive study on the current status of FCI-HLN in Korea, confirming the high heterogeneity and complexity of FCI-HLN practices. Standardization of FCI-HLN is urgently needed. The findings provide a reference for establishing standard FCI-HLN guidelines.

Result Analysis
Print
Save
E-mail