Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: Flow cytometric immunophenotyping of hematolymphoid neoplasms (FCIHLN) is essential for diagnosis, classification, and minimal residual disease (MRD) monitoring. FCI-HLN is typically performed using in-house protocols, raising the need for standardization. Therefore, we surveyed the current status of FCI-HLN in Korea to obtain fundamental data for quality improvement and standardization. Methods: Eight university hospitals actively conducting FCI-HLN participated in our survey.We analyzed responses to a questionnaire that included inquiries regarding test items, reagent antibodies (RAs), fluorophores, sample amounts (SAs), reagent antibody amounts (RAAs), acquisition cell number (ACN), isotype control (IC) usage, positiveegative criteria, and reporting. Results: Most hospitals used acute HLN, chronic HLN, plasma cell neoplasm (PCN), and MRD panels. The numbers of RAs were heterogeneous, with a maximum of 32, 26, 12, 14, and 10 antibodies used for acute HLN, chronic HLN, PCN, ALL-MRD, and multiple myeloma-MRD, respectively. The number of fluorophores ranged from 4 to 10. RAs, SAs, RAAs, and ACN were diverse. Most hospitals used a positive criterion of 20%, whereas one used 10% for acute and chronic HLN panels. Five hospitals used ICs for the negative criterion. Positiveegative assignments, percentages, and general opinions were commonly reported. In MRD reporting, the limit of detection and lower limit of quantification were included. Conclusions This is the first comprehensive study on the current status of FCI-HLN in Korea, confirming the high heterogeneity and complexity of FCI-HLN practices. Standardization of FCI-HLN is urgently needed. The findings provide a reference for establishing standard FCI-HLN guidelines.

OBJECTIVES: Long-term care facilities (LTCFs) are communal environments for patients with chronic diseases or older adults, making them particularly susceptible to significant harm during infectious disease outbreaks. Nonetheless, LTCFs have historically been subject to less stringent infection prevention and control (IPC) mandates. This study aimed to assess the current state of LTCFs and to develop an IPC system tailored for these facilities following the coronavirus disease 2019 (COVID-19) pandemic. METHODS: We conducted an online survey of 11,366 LTCFs in Korea from December 30, 2022 to January 20, 2023, to evaluate the components of IPC in LTCFs. The infectious diseases targeted for IPC included COVID-19, influenza, and scabies. Additionally, we compared institution-based and home-based long-term care insurance facilities. RESULTS: Overall, 3,537 (31.1%) LTCFs responded to the survey, comprising 1,819 (51.4%) institution-based and 1,718 (48.6%) home-based facilities. A majority (87.4%, 2,376/2,720) of these facilities experienced COVID-19 outbreaks. However, only 42.2% of home-based facilities, in contrast to 90.6% of institution-based facilities, were equipped to manage concurrent COVID-19 cases. Similarly, while 92.1% of institution-based facilities were capable of managing influenza, only 50.5% of home-based facilities could do the same. The incidence of scabies was significantly higher in institution-based facilities than in home-based ones (26.1 vs. 4.3%). Additionally, 88.7% of institution-based facilities managed scabies cases effectively, compared to only 42.1% of home-based facilities. CONCLUSIONS Approximately half of the LTCFs had a basic capacity to respond to infectious diseases. However, there were differences in response capabilities between institution-based facilities and home-based facilities.

Purpose: This study aimed to understand and describe the experiences of patients and their families who have received medical services from advanced practice nurses in tertiary general hospitals in Korea. Methods: Data were collected through four focus group interviews with 20 patients and their families who had received medical services from advanced practice nurses for more than six months at four tertiary hospitals from November 29 to December 28, 2023. Verbatim transcripts were analyzed using qualitative content analysis. Results: The four themes extracted from the experiences of patients and their families were as follows: unfamiliar medical personnel encountered during the treatment process, healthcare professionals who exhibited excellence, companions to light my way through the tunnel of illness, and an advanced practice nurse system that must be activated urgently. Conclusion The study’s findings indicate that patients and their families view the care provided by advanced practice nurses as excellent, reliable, and holistic. Research suggests that advanced practice nurses are valuable healthcare professionals in team-based care. The findings suggest that hospitals should utilize an advanced practice nurse system to improve patient outcomes and ensure the quality of care.

Purpose: This study aimed to understand and describe the experiences of patients and their families who have received medical services from advanced practice nurses in tertiary general hospitals in Korea. Methods: Data were collected through four focus group interviews with 20 patients and their families who had received medical services from advanced practice nurses for more than six months at four tertiary hospitals from November 29 to December 28, 2023. Verbatim transcripts were analyzed using qualitative content analysis. Results: The four themes extracted from the experiences of patients and their families were as follows: unfamiliar medical personnel encountered during the treatment process, healthcare professionals who exhibited excellence, companions to light my way through the tunnel of illness, and an advanced practice nurse system that must be activated urgently. Conclusion The study’s findings indicate that patients and their families view the care provided by advanced practice nurses as excellent, reliable, and holistic. Research suggests that advanced practice nurses are valuable healthcare professionals in team-based care. The findings suggest that hospitals should utilize an advanced practice nurse system to improve patient outcomes and ensure the quality of care.

In the 2023 series, we summarized the major clinical research advances in gynecologic oncology based on communications at the conference of Asian Society of Gynecologic Oncology Review Course. The review consisted of 1) Endometrial cancer: immune checkpoint inhibitor, antibody drug conjugates (ADCs), selective inhibitor of nuclear export, CDK4/6 inhibitors WEE1 inhibitor, poly (ADP-ribose) polymerase (PARP) inhibitors. 2) Cervical cancer: surgery in low-risk early-stage cervical cancer, therapy for locally advanced stage and advanced, metastatic, or recurrent setting; and 3) Ovarian cancer: immunotherapy, triplet therapies using immune checkpoint inhibitors along with antiangiogenic agents and PARP inhibitors, and ADCs. In 2023, the field of endometrial cancer treatment witnessed a landmark year, marked by several practice-changing outcomes with immune checkpoint inhibitors and the reliable efficacy of PARP inhibitors and ADCs.

OBJECTIVES: Long-term care facilities (LTCFs) are communal environments for patients with chronic diseases or older adults, making them particularly susceptible to significant harm during infectious disease outbreaks. Nonetheless, LTCFs have historically been subject to less stringent infection prevention and control (IPC) mandates. This study aimed to assess the current state of LTCFs and to develop an IPC system tailored for these facilities following the coronavirus disease 2019 (COVID-19) pandemic. METHODS: We conducted an online survey of 11,366 LTCFs in Korea from December 30, 2022 to January 20, 2023, to evaluate the components of IPC in LTCFs. The infectious diseases targeted for IPC included COVID-19, influenza, and scabies. Additionally, we compared institution-based and home-based long-term care insurance facilities. RESULTS: Overall, 3,537 (31.1%) LTCFs responded to the survey, comprising 1,819 (51.4%) institution-based and 1,718 (48.6%) home-based facilities. A majority (87.4%, 2,376/2,720) of these facilities experienced COVID-19 outbreaks. However, only 42.2% of home-based facilities, in contrast to 90.6% of institution-based facilities, were equipped to manage concurrent COVID-19 cases. Similarly, while 92.1% of institution-based facilities were capable of managing influenza, only 50.5% of home-based facilities could do the same. The incidence of scabies was significantly higher in institution-based facilities than in home-based ones (26.1 vs. 4.3%). Additionally, 88.7% of institution-based facilities managed scabies cases effectively, compared to only 42.1% of home-based facilities. CONCLUSIONS Approximately half of the LTCFs had a basic capacity to respond to infectious diseases. However, there were differences in response capabilities between institution-based facilities and home-based facilities.