The rapid advancement of digital dentistry has enabled the integration of digital technologies into full-mouth rehabilitation, improving communication between clinicians and dental technicians while greatly enhancing treatment efficiency.This case report details the treatment of a patient with severe tooth erosion and wear, where full-mouth rehabilitation with an increase in vertical dimension was planned. Four digital tools‒an intraoral scanner, facial scanner, T-scan, and Jaw Motion Analyzer‒were used to collect and integrate data, which were then utilized to create a virtual patient through CAD software for the design and fabrication of the prosthesis. The effective use of these digital technologies supported the achievement of a stable occlusion and resulted in both functional and esthetic outcomes. This case demonstrates the effectiveness of a digital workflow in enhancing the accuracy and efficiency of the treatment process, producing clinically satisfactory results.

The rapid advancement of digital dentistry has enabled the integration of digital technologies into full-mouth rehabilitation, improving communication between clinicians and dental technicians while greatly enhancing treatment efficiency.This case report details the treatment of a patient with severe tooth erosion and wear, where full-mouth rehabilitation with an increase in vertical dimension was planned. Four digital tools‒an intraoral scanner, facial scanner, T-scan, and Jaw Motion Analyzer‒were used to collect and integrate data, which were then utilized to create a virtual patient through CAD software for the design and fabrication of the prosthesis. The effective use of these digital technologies supported the achievement of a stable occlusion and resulted in both functional and esthetic outcomes. This case demonstrates the effectiveness of a digital workflow in enhancing the accuracy and efficiency of the treatment process, producing clinically satisfactory results.

The rapid advancement of digital dentistry has enabled the integration of digital technologies into full-mouth rehabilitation, improving communication between clinicians and dental technicians while greatly enhancing treatment efficiency.This case report details the treatment of a patient with severe tooth erosion and wear, where full-mouth rehabilitation with an increase in vertical dimension was planned. Four digital tools‒an intraoral scanner, facial scanner, T-scan, and Jaw Motion Analyzer‒were used to collect and integrate data, which were then utilized to create a virtual patient through CAD software for the design and fabrication of the prosthesis. The effective use of these digital technologies supported the achievement of a stable occlusion and resulted in both functional and esthetic outcomes. This case demonstrates the effectiveness of a digital workflow in enhancing the accuracy and efficiency of the treatment process, producing clinically satisfactory results.

The rapid advancement of digital dentistry has enabled the integration of digital technologies into full-mouth rehabilitation, improving communication between clinicians and dental technicians while greatly enhancing treatment efficiency.This case report details the treatment of a patient with severe tooth erosion and wear, where full-mouth rehabilitation with an increase in vertical dimension was planned. Four digital tools‒an intraoral scanner, facial scanner, T-scan, and Jaw Motion Analyzer‒were used to collect and integrate data, which were then utilized to create a virtual patient through CAD software for the design and fabrication of the prosthesis. The effective use of these digital technologies supported the achievement of a stable occlusion and resulted in both functional and esthetic outcomes. This case demonstrates the effectiveness of a digital workflow in enhancing the accuracy and efficiency of the treatment process, producing clinically satisfactory results.

The rapid advancement of digital dentistry has enabled the integration of digital technologies into full-mouth rehabilitation, improving communication between clinicians and dental technicians while greatly enhancing treatment efficiency.This case report details the treatment of a patient with severe tooth erosion and wear, where full-mouth rehabilitation with an increase in vertical dimension was planned. Four digital tools‒an intraoral scanner, facial scanner, T-scan, and Jaw Motion Analyzer‒were used to collect and integrate data, which were then utilized to create a virtual patient through CAD software for the design and fabrication of the prosthesis. The effective use of these digital technologies supported the achievement of a stable occlusion and resulted in both functional and esthetic outcomes. This case demonstrates the effectiveness of a digital workflow in enhancing the accuracy and efficiency of the treatment process, producing clinically satisfactory results.

Purpose: This study aimed to propose a revision of the evaluation objectives of the Korean Dentist Clinical Skill Test by analyzing the opinions of those involved in the examination after a review of those objectives. Methods: The clinical skill test objectives were reviewed based on the national-level dental practitioner competencies, dental school educational competencies, and the third dental practitioner job analysis. Current and former examinees were surveyed about their perceptions of the evaluation objectives. The validity of 22 evaluation objectives and overlapping perceptions based on area of specialty were surveyed on a 5-point Likert scale by professors who participated in the clinical skill test and dental school faculty members. Additionally, focus group interviews were conducted with experts on the examination. Results: It was necessary to consider including competency assessments for “emergency rescue skills” and “planning and performing prosthetic treatment.” There were no significant differences between current and former examinees in their perceptions of the clinical skill test’s objectives. The professors who participated in the examination and dental school faculty members recognized that most of the objectives were valid. However, some responses stated that “oromaxillofacial cranial nerve examination,” “temporomandibular disorder palpation test,” and “space management for primary and mixed dentition” were unfeasible evaluation objectives and overlapped with dental specialty areas. Conclusion When revising the Korean Dentist Clinical Skill Test’s objectives, it is advisable to consider incorporating competency assessments related to “emergency rescue skills” and “planning and performing prosthetic treatment.”

Background: In the Rivaroxaban Once-daily oral direct factor Xa inhibition Compared with vitamin K antagonism for prevention of stroke and Embolism Trial in Atrial Fibrillation (ROCKET AF) trial, rivaroxaban 20 mg was the on-label dose, and the dose-reduction criterion for rivaroxaban was a creatinine clearance of < 50 mL/min. Some Asian countries are using reduced doses label according to the J-ROCKET AF trial. The aim of this study was to assess the safety and efficacy of a high-dose rivaroxaban regimen (HDRR, 20/15 mg) and low-dose rivaroxaban regimen (LDRR, 15/10 mg) among elderly East Asian patients with atrial fibrillation (AF) in real-world practice. Methods: This study was a multicenter, prospective, non-interventional observational study designed to evaluate the efficacy and safety of rivaroxaban in AF patients > 65 years of age with or without renal impairment. Results: A total of 1,093 patients (mean age, 72.8 ± 5.8 years; 686 [62.9%] men) were included in the analysis, with 493 patients allocated to the HDRR group and 598 patients allocated to the LDRR group. A total of 765 patients received 15 mg of rivaroxaban (203 in the HDRR group and 562 in the LDRR group). There were no significant differences in the incidence rates of major bleeding (adjusted hazard ratio [HR], 0.64; 95% confidential interval [CI], 0.21–1.93), stroke (adjusted HR, 3.21; 95% CI, 0.54–19.03), and composite outcomes (adjusted HR, 1.13;95% CI, 0.47–2.69) between the HDRR and LDRR groups. Conclusion This study revealed the safety and effectiveness of either dose regimen of rivaroxaban in an Asian population for stroke prevention of AF. Considerable numbers of patients are receiving LDRR therapy in real-world practice in Asia. Both regimens were safe and effective for these patients.

PURPOSE: This prospective clinical study was conducted to evaluate the clinical usefulness of the freely detachable zirconia ball- and spring-retained implant prosthesis (BSRP) through a comparative analysis of screw- and cement-retained implant prosthesis (SCRP). MATERIALS AND METHODS: A multi-center, randomized, prospective clinical study evaluating the clinical usefulness of the detachable zirconia ball- and spring-retained implant prostheses was conducted. Sixty-four implant prostheses in 64 patients were examined. Periodic observational studies were conducted at 0, 3, 6, and 12 months after delivery of the implant prosthesis. Factors such as implant success rate, marginal bone resorption, periodontal pocket depth, plaque and bleeding index, and prosthetic complications were evaluated, respectively. RESULTS: During the 1-year observation period, all implants survived without functional problems and clinical mobility, showing a 100% implant success rate. Marginal bone resorption was significantly higher in the SCRP group than in the BSRP group only at the time of implant prosthesis delivery (P = .043). In all observation periods, periodontal pocket depth was slightly higher in the BSRP group than in the SCRP group, but there was no significant difference (P > .05). The modified plaque index (mPI) scores of both groups were moderate. Higher ratio of a score 2 in modified sulcus bleeding index (mBI) was observed in the BSRP group in the 6- and 12-months observation. CONCLUSION Within the limitations of this study, the newly developed zirconia ball- and spring-retained implant prosthesis could be considered as an applicable and predictable treatment method along with the existing screw- and cement-retained prosthesis.

Purpose: The purpose of this study was to evaluate whether three-dimensional (3D)-printed flexible denture resin has suitable mechanical properties for use as a thermoplastic denture base resin material. Materials and Methods: A total of 96 specimens were prepared using the 3D printed flexible denture resin (Flexible Denture). Specimens were designed in CAD software (Tinkercad) and printed through a digital light-processing 3D printer (Asiga MAX UV). Post-polymerization process was conducted according to air exposure or glycerin immersion at 35°C or 60°C and for 30 or 60 minutes. The maximum flexural strength, elastic modulus, 0.2% offset yield strength, and Vickers hardness of 3D-printed flexible denture resin were assessed.Result: The maximum flexural strength ranged from 64.46±2.03 to 84.25±4.32 MPa, the 0.2% offset yield strength ranged from 35.28±1.05 to 46.13±2.33 MPa, the elastic modulus ranged from 1,764.70±64.66 to 2,179.16±140.01 MPa, and the Vickers hardness ranged from 7.01±0.40 to 11.45±0.69 kg/mm2 . Conclusion Within the limits of the present study, the maximum flexural strength, 0.2% offset yield strength, elastic modulus, and Vickers hardness are sufficient for clinical use under the post-polymerization conditions of 60°C at 60 minutes with or without glycerin precipitation.

Purpose: This study aimed to evaluate the accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth. Materials and Methods: A reference model was designed by Medit Model Builder software (MEDIT Corp., Seoul). Tooth number 24 and 25 were separated as dies and tooth number 26 was prepared for full-coverage crown. Those were printed using a 3D printer (NextDent 5100). The scanning procedure was performed by a single trained operator with one intraoral scanner (i700; MEDIT Corp.). The scanning groups were divided as follows: group 1 (G1), no fremitus; group 2 (G2), 0.5 mm buccal fremitus in the maxillary left first and second premolar; and group 3 (G3), 1.5 mm buccal fremitus in the maxillary left first and second premolar. Each group was scanned 10 times and were analyzed using the reference model data. Surface-based occlusal clearance was analyzed at the prepared tooth to evaluate accuracy.Result: Mean values of control group (G1) were 1.587±0.021 mm. G2 showed similar values to those from the control group (1.580±0.024 mm before trimming strategy and 1.588±0.052 mm after trimming strategy). G3 showed significantly greater values (1.627±0.025 mm before trimming strategy and 1.590±0.024 mm after trimming strategy) and the differences were found between trimming strategy (P=0.004). Conclusion Bite trimming strategy for fremitus teeth is a reliable technique to reduce inaccuracies caused by the mobility at maximum intercuspation.