OBJECTIVE To evaluate the quality of Mongolian medicine Sendeng-4 based on qualitative and quantitative analysis combined with chemical pattern recognition， in order to provide the reference for its quality control. METHODS The chemical components in Sendeng-4 were analyzed qualitatively by HPLC-Q-Exactive-MS. The contents of 16 components （methyl gallate， ethyl gallate， epicatechin， dihydromyricetin， genipin-1-O-β-D-gentiobioside， caffeic acid， catechin， corilagin， deacetylasperulosidic acid methyl ester， rutin， geniposide， luteolin， myricetin， quercetin， ferulic acid， and toosendanin） in 15 batches of Sendeng-4 （sample S1-S15） were quantitatively analyzed by HPLC-MS/MS. Cluster analysis （CA）， principal component analysis （PCA）， and orthogonal partial least squares discriminant analysis were conducted and variable importance projection （VIP） value greater than 1 was used as the index to screen the differential components. RESULTS A total of 73 chemical components were identified in Sendeng-4， including 20 flavonoids， 16 tannins， 14 organic acids， etc. According to the quantitative analysis， the results exhibited that the average contentsthe of above 16 components in 15 batches of Sendeng-4 were 3.683-7.730， 2.391-6.952， 2 275.538-4 377.491， 2 699.188-3 537.924， 858.266-1 377.393， 3.366-11.003， 140.624-315.683，414.629-978.334， 285.501-1 510.457， 27.799-48.325， 3 625.415-6 309.563， 0.506-0.656， 442.337-649.283， 47.093-59.736， 12.942-15.822， 127.738-326.649 μg/g， respectively. According to the results of CA and PCA， 15 batches of samples could be clustered into two categories: S1-S3， S5-S6， S9-S10 and S13 were clustered into one category； S4， S7-S8， S11-S12， S14-S15 were clustered into one category. VIP values of geniposide， epicatechin， deacetylasperulosidic acid methyl ester and genipin-1-O- β-D-gentiobioside were all greater than 1. CONCLUSIONS HPLC-Q-Exactive-MS and HPLC-MS/MS techniques are employed for the qualitative and quantitative analysis of Sendeng-4. Through chemical pattern recognition analysis， four differential components are identified: geniposide， epicatechin， deacetylasperulosidic acid methyl ester， and genipin-1-O-β-D-gentiobioside.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

OBJECTIVE To comprehensively evaluate the quality of Sanzi powder from different batches based on 12 components quantitative analysis combined with chemical pattern recognition and entropy weight-TOPSIS method. METHODS The contents of 12 components in 15 batches of Sanzi powder （No. S1-S15） were determined by HPLC-MS/MS， such as ethyl gallate， gallic acid， ferulic acid， corilagin， genipin-1-O-β-D-gentiobioside， toosendanin， geniposide， caffeic acid， methyl deacetylated coumarinate， tannic acid， rutin， quercetin. Cluster analysis （CA）， principal component analysis （PCA）， and orthogonal partial least squares-discriminant analysis （OPLS-DA） were conducted on the assay results. Using variable importance projection （VIP） value＞1 and P＜0.05 as the evaluation criteria， the quality differential markers in Sanzi powder were screened. The entropy weight method was used to calculate the weight value， and TOPSIS method was used to rank the quality of 15 batches of Sanzi powder from superior to inferior. RESULTS The contents of the 12 components were 13.494-24.292， 2 069.608-3 188.100， 1.410-3.616， 1 065.030-2 630.584， 1 404.704-1 838.078， 101.640-354.268， 9 193.720-14 777.854， 1.240-5.060， 148.028-5 541.990， 4 261.422-5 607.438， 107.560- 195.512， 2.226-4.192 μg/g， respectively. The results of CA， PCA and OPLS-DA indicated that 15 batches of Sanzi powder could be clustered into two groups. Specifically， batches S3， S7， S10 and S15 were grouped into one category， and remaining batches were grouped into one category. VIP values of geniposide， quercetin， caffeic acid， and methyl deacetylated coumarinate were all greater than 1， with corresponding P-values less than 0.05. The results of the entropy weight-TOPSIS analysis revealed that methyl deacetylate exhibited the smallest information entropy and the highest weight. The relative closeness degrees of samples S3， S7， S10 and S15 ranged from 0.789 to 0.973， while the remaining samples ranged from 0.054 to 0.172. CONCLUSIONS The contents of 12 components in Sanzi powder could be determined accurately by using HPLC-MS/MS technology. Methyl deacetylated coumarinate， geniposide， quercetin and caffeic acid were identified as the quality differential markers. It was found that the overall quality of samples S3， S7， S10 and S15 were superior to that of other batches. Notably， the quality of Gardeniae Fructus decoction pieces emerges as a critical factor in ensuring the consistency of the preparation’s quality.

The objective of this study was to analyze the effects on cell viability, apoptosis, and cell cycle of non-small cell lung cancer (NSCLC) A549 cells after intervention with Agrimonia pilosa (AP) and investigate Agrimonia pilosa anti-tumor activity in vitro. Meanwhile, liquid chromatography mass spectrometry (LC-MS) metabolomics technology was used to analyze the changes of cellular metabolites and metabolic pathways. The results of this study will provide a theoretical and experimental basis for investigating the mechanism of the effect of Agrimonia pilosa on non-small cell lung cancer A549 cells. The results showed that the cell nucleus of A549 cells crumpled and apoptosis occurred with the increase of drug concentration. The survival rate of the cells decreased, and the inhibition rate reached 21.5% and 91.74% under the low and high dose conditions, respectively. Lactate dehydrogenase (LDH) content increased (P < 0.05). Metabolomics results showed significant differences in metabolism between groups, thirty-three distinct metabolites including LysoPC(24:0/0:0), LysoPC(17:0/0:0) and PC(O-40:5) were deduced. The pathway enrichment showed that the Agrimonia pilosa plays an anti-tumor role mainly by regulating the metabolism of glycerophosphate and purine in A549 cells, in which the effect on glycerophosphate metabolism pathway was most significant. The results of combined pharmacodynamics suggested that Agrimonia pilosa might induce apoptosis and inhibit the growth of A549 cells by regulating LysoPC(24:0/0:0), LysoPC(17:0/0:0) and PC(O-40:5) metabolites in A549 cells.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

Due to the high similarity with the lipid layer between human skin keratinocytes, functional cosmetics with layered liquid crystal structure prepared by liquid crystal emulsification technology encapsulating natural active substances have become a hot research topic in recent years. This type of functional cosmetic often has a fresh and natural skin feel, excellent skin barrier repair function and efficient moisturizing effect, etc., showing great potential in cosmetic application. However, the present research on the application of liquid crystal emulsification technology to functional cosmetics is still in the initial stage, and there are fewer relevant reports with reference values. Based on the mentioned above, this review provides a comprehensive summary of functional cosmetics with layered liquid crystal structures prepared by liquid crystal emulsification technology from the following aspects: the structure of human skin, the composition of lamellar liquid crystal, the advantages of liquid crystal emulsification technology containing natural active substances used in the field of functional cosmetics, the preparation process, main components, influencing factors during the preparation and the market functional cosmetics with lamellar liquid crystal structure. Finally, the prospect of the application of liquid crystal emulsification technology in functional cosmetics is presented, to provide useful references for those engaged in the research of liquid crystal emulsification technology-related functional cosmetics.

Fluorescence anisotropy(FA)analysis has many advantages such as no requirement of separation,high throughput and real-time detection,and thus has been widely used in many fields,including biochemical analysis,food safety detection,environmental monitoring,etc.However,due to the small volume or mass of the target,its combination with the fluorescence probe cannot produce significant signal change.To solve this issue,researchers often use nanomaterials to enhance the mass or volume of fluorophore to improve the sensitivity.Nevertheless,this FA amplification strategy also has some disadvantages.Firstly,nanomaterials are easy to quench fluorescence.As a result,the FA value is easily influenced by light scattering,which reduces the detection accuracy.Secondly,fluorescent probes in most methods require complex modification steps.Therefore,it is necessary to develop new FA probes that do not require the amplification of volume and mass or modification.As a new kind of nanomaterials,luminescent metal-organic framework(MOF)has a large volume(or mass)and strong fluorescence emission.It does not require additional signal amplification materials.As a consequence,it can be used as a potential FA probe.This study successfully synthesized a lanthanide metal organic framework(Ce-TCPP MOF)using cerium ion(Ce3+)as the central ion and 5,10,15,20-tetra(4-carboxylphenyl)porphyrin(H2TCPP)as the ligand through microwave assisted method,and used it as a novel unmodified FA probe to detect phosphate ions(Pi).In the absence of Pi,Ce-TCPP MOF had a significant FA value(r).After addition of Pi,Pi reacted with Ce3+in MOF and destroyed the structure of MOF into the small pieces,resulting in a decrease in r.The experimental results indicated that with the increase of Pi concentration,the change of the r of Ce-TCPP MOF(Δr)gradually increased.The Δr and Pi concentration showed a good linear relationship within the range of 0.5-3.5 μmol/L(0.016-0.108 mg/L).The limit of detection(LOD,3σ/k)was 0.41 μmol/L.The concentration of Pi in the Jialing River water detected by this method was about 0.078 mg/L,and the Pi value detected by ammonium molybdate spectrophotometry was about 0.080 mg/L.The two detection results were consistent with each other,and the detection results also meet the ClassⅡwater quality standard,proving that this method could be used for the detection of Pi in complex water bodies.

Objective To investigate the predictive value of new simplified insulin resistance(IR)assessment indexes in identifying subclinical left ventricular systolic function impairment in patients with type 2 diabetes mellitus(T2DM).Methods A total of 150 T2DM patients with preserved left ventricular ejection fraction(LVEF≥50%)who were admitted to Department of Endocrinology of the First Affiliated Hospital of Air Force Medical University from June 2021 to December 2021 were retrospectively analyzed.All patients underwent two-dimensional speckle tracking echocardiography to measure left ventricular global longitudinal strain(GLS).According to GLS value,the subjects were divided into the normal group(GLS≥18%group,n=80)and the impaired group(GLS<18%group,n=70).Some new simplified IR assessment indicators were calculated and compared between the two groups,including body mass index(BMI),TG/HDL-C ratio,triglyceride-glucose(TyG)index,TyG-BMI index,TyG-WHR and metabolic score for IR(METS-IR).Correlation between the GLS and the new simplified IR assessment indexes was analyzed.The receiver operating characteristic(ROC)curve was used to analyze the diagnostic efficacy of different simplified IR assessment indexes,with the area under the curve(AUC)calculated.Furthermore,according to whether the subjects were complicated with hypertension,binary logistics regression analysis was performed to explore the independent correlation between the simplified IR assessment index and GLS<18%.Results Total 150 were included with aged(54.5±13.7)years with 96(64.0%)men and 54(36.0%)women.Compared with the GLS≥18%group,the TG/HDL-C ratio,TyG index,TyG-BMI,and METS-IR of subjects in the GLS<18%group were significantly increased(P<0.05).Pearson correlation analysis showed that TG/HDL-C ratio,TyG index,TyG-BMI,TyG-WHR,and METS-IR were negatively correlated with GLS(P<0.05).ROC analysis showed that TyG index had a certain predictive value for the evaluation of GLS<18%(AUC=0.678,95%CI 0.591-0.765,P<0.001).Stratification based on hypertension and further adjusting for confounding factors,TyG index remains significantly associated with GLS<18%(OR=3.249,95%CI 1.045-10.103,P=0.042).Conclusions The novel simplified insulin resistance evaluation indexes are closely associated with left ventricular subclinical systolic dysfunction in T2DM patients with preserved ejection fraction.TyG index is an effective index to identify left ventricular subclinical dysfunction in these populations.