Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

[Objective] To analyze the loss rate of platelet donors and evaluate the strategies for establishing a platelet donor bank. [Methods] A total of 1 443 donors who joined the HLA and HPA gene donor bank for platelets in Henan Province from 2018 to 2020 were included in this study. Data on the total number of apheresis platelet donations, annual donation frequency, age at enrollment, donation habits (including the number of platelets donated per session and whether they had previously donated whole blood), and enrollment location were collected from the platelet donor information management system. Donor loss was determined based on the date of their last donation. The loss rates of different groups under various conditions were compared to assess the enrollment strategies. [Results] By the time the platelet bank was officially operational in 2022, 421 donors had been lost, resulting in an loss rate of 29% (421/1 443). By the end of 2023, the overall cumulative loss rate reached 52% (746/1 443). The loss rate was lower than the overall level in groups meeting any of the following conditions: total apheresis platelet donations exceeding 50, annual donation frequency of 10 or more, age at enrollment of 40 years or older, donation of more than a single therapeutic dose per session, or a history of whole blood donation two or more times. Additionally, loss rates varied across different enrollment locations, with higher enrollment numbers generally associated with higher loss rates. [Conclusion] Through a comprehensive analysis of donor loss, our center has adjusted its strategies for establishing the donor pool. These findings also provide valuable insights for other blood collection and supply institutions in building platelet donor banks.

ObjectiveTo investigate the therapeutic effect and mechanism of modified Chunzetang on bladder fibrosis and detrusor function in rats with neurogenic bladder urinary retention induced by spinal cord injury. MethodsIn this study， an improved Hassan Shaker spinal cord transection method was used to establish a model of neurogenic bladder urinary retention induced by spinal cord injury， and rats with a spinal cord injury behavior score of 0 were selected for follow-up experiments. The selected rats were randomly divided into a model group （normal saline gavage）， low-dose traditional Chinese medicine （TCM） group （gavage of 14.4 g·kg^-1 modified Chunzetang）， high-dose TCM group （gavage of 28.8 g·kg^-1 modified Chunzetang）， positive drug group ［intraperitoneal injection of 0.05 g·kg^-1 nuclear transcription factor-κB （NF-κB） inhibitor pyrrolidine dithiocarbamate （PDTC）］， and combination group （intraperitoneal injection of 0.05 g·kg^-1 PDTC + gavage of 28.8 g·kg^-1 modified Chunzetang）. The rats in these groups were administrated with corresponding drugs once a day for four weeks. The BL-420s biofunction acquisition system was used in the experiment to calculate the urodynamic indexes， and the isolated bladder was quickly weighed. The detrusor traction experiment was used to record the minimum bladder contraction tension and frequency in each group. The pathological morphology and tissue fibrosis of detrusor in each group observed by Hematoxycin-eosin （HE） staining and Masson staining were compared. The expression level of α-smooth muscle actin （α-SMA） was detected by immunohistochemistry. Western blot was used to detect the protein expression of NF-κB p65， nuclear transcription factor-κB suppressor protein α （IκBα）， transforming growth factor-β₁ （TGF-β₁）， type Ⅰ collagen （ColⅠ）， and type Ⅲ collagen （ColⅢ） in bladder tissue of rats in each group. Enzyme-linked immunosorbent assay （ELISA） was used to detect the changes in serum levels of IL-6， IL-1β， and TNF-α. ResultsCompared with that in the sham operation group， the pressure at the urinary leakage point in the model group decreased （P<0.01）， and the bladder mass， bladder contractile tension， maximum bladder capacity， and bladder compliance increased （P<0.05，P<0.01）. HE staining showed that the arrangement of bladder epithelial cells was disordered， and the pathological manifestations such as mucosa and myometria neutrophil infiltration were obvious. The lamina propria structure was destroyed， and the muscle fiber arrangement was disordered. The interstitial widening and tissue edema were obvious. Masson staining showed that the bladder wall of the model group had more collagen fiber deposition， and the degree of detrusor fibrosis was more severe. The content of detrusor in the visual field was reduced. At the same time， the protein expressions of NF-κB p65， TGF-β₁， IκBα， ColⅠ， and ColⅢ in bladder tissue of rats in the model group were significantly increased （P<0.01）， and the serum levels of IL-6， IL-1β， and TNF-α were significantly increased （P<0.05）. Compared with that in the model group， the pressure at the urinary leakage point in the modified Chunzetang and positive drug groups was increased （P<0.05）， and the wet bladder weight， minimum bladder contractile tension， maximum bladder capacity， and bladder compliance were restored （P<0.05， P<0.01）. HE and Masson showed that the bladder epithelial cells were relatively neatly arranged， and the structure of the bladder lamina propria was relatively stable. The detrusor bundles were arranged in an orderly manner， and the interstitium was narrow. The degree of tissue edema was relatively low， and the degree of bladder detrusor fibrosis in the modified Chunzetang and positive drug groups was reduced， while the degree of bladder detrusor fibrosis in the positive drug group and combination groups was not obvious. The results of Western blot showed that the expression of NF-κB p65， IκBα， TGF-β₁， ColⅠ， and ColⅢ in bladder tissue， as well as the serum levels of IL-6， IL-1β， and TNF-α in modified Chunzetang and positive drug groups were significantly lower， and the expression of bladder tissue-related proteins and the serum levels of IL-6， IL-1β， and TNF-α in the TCM groups decreased significantly with the increase in dose （P<0.05）. The results of immunohistochemistry suggested that modified Chunzetang could fully affect the expression of α-SMA in bladder tissue. ConclusionModified Chunzetang can inhibit collagen deposition in bladder tissue of rats with urinary retention induced by spinal cord injury， delay the occurrence and development of bladder fibrosis， and protect the normal contractile function of bladder detrusor， and its mechanism may be related to inhibiting the NF-κB/TGF-β₁ signaling pathway， reducing the production of NF-κB p65， IκBα， TGF-β₁， ColⅠ， ColⅢ， and other related proteins， and protecting the muscle strength of detrusor.

Non-alcoholic fatty liver disease （NAFLD） is a chronic liver disease closely related to metabolism， which is mainly characterized by abnormal lipid deposition in hepatocytes. In recent years， with the increasing prevalence of obesity and metabolic syndrome， NAFLD has become one of the most common chronic diseases in the world. The pathogenesis of NAFLD is complex and varied， involving the cross-regulation of multiple signaling pathways such as glucose-lipid metabolism， oxidative stress， and inflammation. The TLR4 signaling pathway plays a key role in the development and progression of NAFLD， and abnormal activation of this pathway accelerates the deterioration of NAFLD by promoting the release of pro-inflammatory cytokines， inducing oxidative stress， and exacerbating insulin resistance. Studies have shown that traditional Chinese medicine （TCM） can regulate the TLR4 signaling pathway to alleviate the symptoms and pathological features of NAFLD. The present review summarizes the experimental research progress in the TCM regulation of the TLR4 signaling pathway in treating NAFLD in the past 5 years， covering a wide range of TCM active ingredients （such as polysaccharides， terpenoids， alkaloids， flavonoids） and compound prescriptions. The active ingredients and compound prescriptions of TCM can effectively ameliorate lipid metabolism disorders， reduce insulin resistance， regulate intestinal flora， and inhibit inflammation and oxidative stress by regulating the TLR4 signaling pathway via multiple targets and pathways， thus slowing down the progression of NAFLD. Through in-depth analysis of the pathological mechanisms of NAFLD and exploration of the potential of TLR4 signaling pathway as a therapeutic target， we can provide theoretical support for the application of TCM in the treatment of NAFLD， as well as new perspectives and directions for future clinical research and new drug development， thereby promoting the innovation and development of therapeutic strategies for NAFLD.

ObjectiveBased on the conjoint analysis of transcriptome and metabolome， the key genes in the phenylpropanoid biosynthesis pathway of Lonicera macranthoides were explored， which provided a basis for further exploring the synthesis and regulation mechanism of phenylpropanoid compounds in "Xianglei" L. macranthoides. MethodsThe stem， leaves， and three flowering flowers of "Xianglei" L. macranthoides were selected as experimental materials to construct transcriptome and metabolome. The transcriptome and metabolomics were conjointly analyzed by the Kyoto Encyclopedia of Genes and Genomes （KEGG） database and weighted correlation network analysis （WGCNA）， and the key genes in the phenylpropanoid biosynthesis pathway of L. macranthoides were explored. ResultsIn this study， 77 differential phenylpropanoids and 315 differential genes were found. Through the joint analysis of transcription and metabolism， nine key differential metabolites and four key genes related to them were finally discovered. Among them， cinnamic acid， 5-O-caffeoylshikimic acid，sinapyl alcohol， and chlorogenic acid were higher in flowers， and the content of the iconic effective component， namely chlorogenic acid，decreased sharply during the withering period. Caffeic acid，ferulic acid， 5-hydroxyconiferaldehyde，p-coumaryl alcohol， and syringin were higher in leaves. These four key genes belong to the cinnamic alcohol dehydrogenase （CAD） family， 4-coumaric acid： Coenzyme A （4CL） family， hydroxycinnamyl transferase （HCT） family， and L-phenylalanine ammonlyase （PAL） family genes. ConclusionAmong the four key genes excavated from L. macranthoides， TRINITY_DN42767_c0_g6 is related to the synthesis of p-coumaryl alcohol and sinapyl alcohol. TRINITY_DN43525_c4_g1 uses caffeic acid，ferulic acid，and cinnamic acid as substrates to catalyze the next reaction. TRINITY_DN47958_c3_g4 correlates with the synthesis of 3-p-coumaroyl quinic acid and caffeoyl-CoA， and TRINITY_DN52595_c1_g2 correlates with cinnamic acid synthesis. These findings provide a basis for further exploring the synthesis and regulation mechanism of phenylpropanoids in "Xianglei" L. macranthoides.

Abstract The accelerated development of digital technology has brought new opportunities for the innovation of adolescent mental health service models. Through international case analysis, the paper finds that developed countries have established adolescent mental health service systems with significant digitalempowerment characteristics. For example, the Crisis Text Line of US realizes riskgraded responses by relying on language processing technology, the Kooth platform of UK develops an Artificial Intelligence (AI) counseling system using cognitivebehavioral therapy, ReachOut of Australia has established a digital mental health resource library, SPARX of New Zealand reshapes the treatment experience with a gamified interface, and "Annie Advisor" of Finland pioneers the application of affective computing technology. The above innovative practices present six characteristics: precision service supply based on big data, intervention systems integrated with artificial intelligence, anonymous mechanisms to ensure privacy and security, highly accessible services that break through time and space limitations, human-machine collaborative dual track support models, and interdisciplinary service systems, providing many references and implications for China to continuously and deeply explore digital technologyempowered youth mental health services.

Objective To investigate the impact of COVID-19 infection on the early clinical outcomes of patients undergoing valve replacement. Methods Perioperative data of patients who underwent single valve replacement at the Second Affiliated Hospital of Chinese People's Liberation Army Medical University from January to February 2023 were consecutively collected. Based on COVID-19 infection status, patients were divided into a COVID-19 group and a non-COVID-19 group. The perioperative data were compared between the two groups. Results A total of 136 patients were included, comprising 53 males and 83 females, with a mean age of (53.4±10.2) years. There were 32 patients receiving aortic valve replacements, 102 mitral valve replacements, and 2 tricuspid valve replacements. The COVID-19 group comprised 70 patients, and the non-COVID-19 group included 66 patients. No statistical difference was observed in the incidence of postoperative complications between the two groups [9.09% (6/66) vs. 11.43% (8/70), P=0.654]. However, the COVID-19 group had longer postoperative mechanical ventilation duration [1 201.00 (1 003.75, 1 347.75) min vs. 913.50 (465.50, 1 251.00) min, P=0.001] and ICU stay [3 (2, 3) days vs. 2 (2, 3) days, P<0.001] compared to the non-COVID-19 group. Additionally, troponin I [4.76 (2.55, 7.93) ng/mL vs. 2.66 (1.19, 5.65) ng/mL, P=0.001] and brain natriuretic peptide [608.50 (249.75, 1 150.00) pg/mL vs. 192.00 (100.93, 314.75) pg/mL, P<0.001] levels were significantly higher in the COVID-19 group. Conclusion For patients with single valve disease undergoing elective surgery, short-term outcomes after recovery from COVID-19 infection are favorable, with no significant increase in in-hospital mortality or postoperative complication rates.