PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: This study aimed to identify the clinical characteristics of multidrug-resistant/ rifampicin-resistant tuberculosis (MDR/RR-TB) in the Republic of Korea. Methods: Data of notified people with tuberculosis between July 2018 and December 2021 were retrieved from the Korea Tuberculosis Cohort database. MDR/RR-TB was further categorized according to isoniazid susceptibility as follows: multidrug-resistant tuberculosis (MDR-TB), rifampicin-monoresistant tuberculosis (RMR-TB), and RR-TB if susceptibility to isoniazid was unknown. Multivariable logistic regression analysis was conducted to identify the factors associated with MDR/RR-TB. Results: Between 2018 and 2021, the proportion of MDR/RR-TB cases among all TB cases and TB cases with known drug susceptibility test results was 2.1% (502/24,447). The proportions of MDR/RR-TB and MDR-TB cases among TB cases with known drug susceptibility test results were 3.3% (502/15,071) and 1.9% (292/15,071), respectively. Among all cases of rifampicin resistance, 31.7% (159/502) were RMR-TB and 10.2% (51/502) were RR-TB. Multivariable logistic regression analyses revealed that younger age, foreigners, and prior tuberculosis history were significantly associated with MDR/ RR-TB. Conclusion Rapid identification of rifampicin resistance targeting the high-risk populations, such as younger generations, foreign-born individuals, and previously treated patients are necessary for patient-centered care.

Purpose: Adjuvant treatment for craniopharyngioma after surgery is controversial. Adjuvant external beam radiation therapy (EBRT) can increase the risk of long-term sequelae. Stereotactic radiosurgery (SRS) is used to reduce treatment-related toxicity.In this study, we compared the treatment outcomes and toxicities of adjuvant therapies for craniopharyngioma. Materials and Methods: We analyzed patients who underwent craniopharyngioma tumor removal between 2000 and 2017. Of the 153 patients, 27 and 20 received adjuvant fractionated EBRT and SRS, respectively. We compared the local control (LC), progression-free survival (PFS), and overall survival between groups that received adjuvant fractionated EBRT, SRS, and surveillance. Results: The median follow-up period was 77.7 months. For SRS and surveillance, the 10-year LC was 57.2% and 57.4%, respectively. No local progression was observed after adjuvant fractionated EBRT. One patient in the adjuvant fractionated EBRT group died owing to glioma 94 months after receiving radiotherapy (10-year PFS: 80%). The 10-year PFS was 43.6% and 50.7% in the SRS and surveillance groups, respectively. The treatment outcomes significantly differed according to adjuvant treatment in nongross total resection (GTR) patients. Additional treatment-related toxicity was comparable in the adjuvant fractionated EBRT and other groups. Conclusion Adjuvant fractionated EBRT could be effective in controlling local failure, especially in patients with non-GTR, while maintaining acceptable treatment-related toxicity.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

Chronic rhinosinusitis with nasal polyps (CRSwNP) is a prevalent condition that significantly impacts quality of life and places a burden on healthcare systems. The advent of biologics targeting type 2 immune pathways offers new therapeutic options for severe and/or uncontrolled CRSwNP. Initially, biologic use was guided by the European Position Paper on Rhinosinusitis and Nasal Polyps (EPOS) 2020 and the European Forum for Research and Education in Allergy and Airway Diseases (EUFOREA) guidelines, despite limited data on clinical indications, response measures, and treatment duration. Since then, numerous studies and the EPOS/EUFOREA 2023 update have refined these guidelines. The update defines clinical indications for biologics based on type 2 inflammation markers by lowering the blood eosinophil threshold from 250 to 150 cells/μL. The response to biologics is now more simply categorized into three levels based on reductions in nasal polyp size, improvements in quality of life, and enhancement of smell. Treatment evaluation is recommended at 6 months with annual follow-up. Longer administration intervals, such as every four weeks, have also proven effective in well-controlled patients. Although specific guidelines for discontinuation or switching biologics remain lacking, clinical judgment is essential in determining when treatment should be stopped or adjusted. Additionally, regulatory updates support the use of biologics for CRSwNP, and novel agents such as tezepelumab (an anti-thymic stromal lymphopoietin monoclonal antibody) continue to show promise. Finally, in Korea, biologics for CRSwNP are not covered by national health insurance, leading to extended dosing intervals due to high costs. Despite this limitation, studies have shown that adjusted dosing can maintain subjective quality of life. Recent studies by Korean authors have also explored practical considerations such as dosing intervals and comparisons to surgery. Further research is needed to optimize treatment strategies, particularly regarding cost-effectiveness and prospective studies tailored to the Korean healthcare system.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.