Objective: To determine the normative values of the Korean version of the Modified Barthel Index (K-MBI) score for typically developing children in Korea and assess its suitability for use in children. Methods: Rehabilitation physicians and occupational therapists with children were invited through an online platform to participate in a survey assessing their children’s performance of activity of daily living (ADL) using the K-MBI. The questionnaire encompassed queries on sociodemographic information of children and the assessment criteria outlined in the K-MBI. The standardized K-MBI scores by age were estimated using the nonlinear least squares method. Results: The analysis incorporated responses from a total of 206 individuals. K-MBI total scores showed a rapid increase over the first 8 years of life, with 99% of children achieving a score of 90 or higher by age 8. Mobility scores exhibited a swift increase during early childhood, surpassing 90% of the maximum score at 3 years of age and nearing 100% at 7 years of age. In contrast, self-care scores demonstrated a more gradual advancement, achieving approximately 100% of the maximum score by the age of 10 years. Conclusion Age-specific normative values for K-MBI scores of typically developing children were established, which can be used as a reference in clinical care. While the K-MBI captured the overall trajectory of children’s ADL development, it did not discern subtle differences across various developmental stages. There is a need for the development of more refined assessment tools tailored specifically to children.

Background: Patients with autism spectrum disorder (ASD) present challenges in dental treatment cooperation owing to deficits in communication skills and social interaction. Behavioral guidance, sedation, and general anesthesia may be employed to ensure the quality of dental care for individuals with ASD. This study aimed to examine the trends in dental treatment for patients with ASD who visited the Department of Pediatric Dentistry at Dankook University Jukjeon Dental Hospital, an oral health center for the disabled in the Gyeonggi region, over the past 10 years. Methods: This study utilized the order communication system to gather data on sex, age, cooperation level, number of quadrants treated, and administration of sedation or general anesthesia for patients with ASD who visited the Department of Pediatric Dentistry at Dankook University Jukjeon Dental Hospital between January 2013 and December 2022. Results: The total number of patients with ASD increased annually, possibly due to an increase in ASD prevalence and the hospital's designation as a center for disabled oral health. General anesthesia was predominant before 2017, with a shift towards N2O-O2 sedation. The most common age group for sedation or general anesthesia was 6–9 years, with a higher prevalence in males than in females. Notably, N2O-O2 and midazolam sedation resulted in better cooperation and fewer treated teeth than general anesthesia. Conclusion This study highlights the evolving trends in dental treatment for individuals with ASD, indicating a shift towards outpatient methods, particularly N2O-O2 sedation. The sex distribution aligns with national statistics, emphasizing a higher prevalence of ASD in males than in females. These findings underscore the need for further research to establish evidence-based guidelines for optimal dental care strategies tailored to the unique needs of individuals with ASD.

This study aimed to compare color matching between single-shade composite resin-restored teeth with various pulp capping materials and the dentin surrounding the restoration through instrumental analysis and visual evaluation of the color difference. Fifty maxillary right central incisor acrylic resin teeth were prepared with standardized Class III cavities on the proximal surfaces. These teeth were divided into five groups: restored with single-shade composite resin only; Ultra-Blend™ plus followed by single-shade composite resin; TheraCal PT™ followed by single-shade composite resin; Endocem® MTA premixed followed by single-shade composite resin; and Well-root PT™ followed by single-shade composite resin. The color difference (ΔEab*) between the restored area and the center of the resin teeth was measured using a spectrophotometer. No significant color difference was observed in groups restored with only single-shade composite resin, Ultra-Blend™ plus, and TheraCal PT™. The visual evaluation revealed that Ultra-Blend™ plus exhibited the best color matching score, whereas the Endocem® MTA premixed and Well-root PT™ groups showed significantly lower color matching scores than the single-shade composite resin-only group. When opting for single-shade composite resin usage for anterior tooth restorations with the aim of reducing chair time, pulp capping materials UltraBlend™ plus and TheraCal PT™ provide esthetically pleasing results.

This study aimed to enhance the physicochemical properties of sodium iodide-based root filling materials, particularly solubility. In earlier developmental stages, the iodoformcontaining paste exhibited high antibacterial efficacy but failed to meet only the solubility requirement among the ISO 6876 criteria. Therefore, this study focused on enhancing the physicochemical properties of the paste under development, particularly centering on reducing its solubility. Four experimental groups were established, including three control group. The previously developed D30 paste was named the Oil 33 group, and the control group was named the Vitapex® group. The Oil 50 group, in which the oil content was increased, and the Oil 45L group, in which lanolin was incorporated. The physical properties (solubility, pH, flowability, and film thickness) of the four pastes were evaluated according to the ISO 6876 standards. No significant differences were observed between the Oil 45L and Vitapex® groups in any of the physical property evaluations. While the Oil 33 and Oil 50 groups met the ISO 6876 standards for flowability and film thickness, the Oil 45L group met all the physical properties. However, reducing the overall oil content may be necessary to enhance the antimicrobial properties. The result of the physicochemical experiments showed that the Oil 45L group with the newly formulated composition and incorporated lanolin exhibited low solubility meeting the ISO 6876 standard of ≤ 3%. We were able to develop a paste with more stable solubility than previous iodide-based root-filling materials. Therefore, the oil content must be further adjusted to improve its antimicrobial properties. If other physical properties also meet the ISO 6876 standards and demonstrate excellent results in cytotoxicity tests, this root filling material could potentially replace existing options.

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of lightcured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultrablend™ plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC™, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT™, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

The aim of this study was to retrospectively analyze the effects of pulp treatment on exfoliation of primary teeth and its related factors. In this study, 167 teeth of 97 patients aged 6 months to 12 years who were treated with pulp treatment at Dankook Dental Hospital were selected, and information related to pulp treatment and tooth loss was collected. The included subjects were 72 primary anterior teeth (43.1%) and 95 primary posterior teeth (56.9%), of which 56 were males (57.7%) and 41 females (42.3%). The mean follow-up period was 106.1 ± 38.7 months, and the mean age at pulp treatment was 34.8 ± 15.4 months for primary anterior teeth and 69.1 ± 25.1 months for primary posterior teeth. Unilaterally pulpectomized teeth were significantly exfoliated earlier than the same tooth on the opposite side (p < 0.05). Also, in the case of teeth with periapical lesions, despite pulp treatment, the probability of extraction due to infection has been increased on primary anterior teeth (p < 0.05), but not on posterior teeth (p > 0.05). Pulpectomized teeth were lost earlier, an average of 7.8 months for primary anterior teeth and 8.5 months for primary posterior teeth. Early loss of the primary tooth can lead to space loss and premature eruption of the successor, so this can be considered when planning or performing treatment of the primary tooth.

Background: Anxiety and fear in children's dental care are major impediments to successful dental care. High-quality dental treatment can be achieved using various behavioral control methods; however, conscious sedation using drugs can be used if behavioral control is difficult, owing to excessive fear and anxiety. This study aimed to examine the trends in conscious sedation implemented in pediatric dentistry at the Dankook University Dental Hospital over the past 11 years. Methods: This study included 6,438 cases of dental treatment under conscious sedation conducted over 11 years between January 2011 and December 2021 in the Department of Pediatric Dentistry at Dankook University Dental Hospital. Results: Over the past 11 years, the number of dental treatments under sedation has increased. In the case of inhalation sedation using nitrous oxide, the rate of increase was approximately twice every year, and the use of midazolam gradually decreased. The average age of children who underwent sedation was 5.11 years, and the rate of sedation treatment in children aged <4 years tended to decrease, while that of children aged >5 years tended to increase. This is related to the trend of changes in drugs used. In a sex-based survey, sedation treatment rate was higher in males than that in females. Conclusion Appropriate selection of sedatives can reduce the frequency of general anesthesia and minimize complications through efficient and safe dental treatments. Trend analysis of sedation by year will help provide guidelines for the appropriate selection of sedation for dental treatment of children and patients with disability.

The purpose of this study was to compare the palatal dimensions (volume, width, length, and height) in different malocclusions (Class I, II, and III) in mixed dentition using a three-dimensional digital scanner. The study was performed on 30 selected casts from 1400 casts that were taken at the Department of Pediatric Dentistry at Dankook University. Casts consisted of Class I, II, and III malocclusion groups in Hellman’s dental age IIIA. The mean age was 8 years and 6 months ± 11 months. Each cast was scanned by three-dimensional digital scanner, Medit T710 (Medit, Seoul, Korea), and shaped into the three-dimensional image and calculated palatal dimensions using the Plan T program (SMD solution, Seoul, Korea). The values were statistically compared and evaluated by Kruskal-Wallis followed by the Mann-Whitney test. According to our results, subjects with Class II malocclusion showed lower palatal width and longer palatal length compared to those with Class I and Class III. For palatal height, Class III malocclusion subjects in mixed dentition exhibited a larger number than Class II and Class I. Lastly, for palatal volume, compared to other malocclusions, Class III showed higher results; however, there were no significant differences. The form of the palate differs in types of malocclusions and understanding of these differences is important in clinical significance. Based on this study, the understanding of the relationship between the shape of the palate and the skeletal pattern provides useful information about orthodontic treatment plans, early diagnosis of malocclusion, and morphological integration mechanisms. Orthopedic treatment in the maxilla should be performed during early and intermediate mixed dentition to enhance treatment efficiency.

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC®, TLC), resin-modified calcium hydroxide cement (Ultra-BlendTM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA® premixed regular 〔EMPR〕 and Well-RootTM PT 〔WRP〕). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials’ pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

The aim of this study is to compare the properties of odontoblast gene of early passage cells and late passage cells derived from impacted maxillary supernumerary teeth.
Impacted supernumerary teeth with maxilla were extracted from 12 patients (8 males, 4 females) between 6 - 9 years old without medical history. Real-time polymerase chain reaction (PCR) was conducted to compare characterization of odontoblast cell in the 3rd and 10th passage, and between with bone inducing additive group and without additive group. Genes for odontoblasts characteristics are osteonectin (ONT), alkaline phosphatase (ALP), osteocalcin (OCN), dentin matrix protein 1 (DMP-1) and dentin sialophosphoprotein (DSPP).
The level of gene expression was in a decreasing order of ONT, ALP, OCN, DMP-1 and DSPP in the 3rd passage, and in decreasing order of ONT, DMP-1, OCN, ALP, and DSPP in the 10th passage in the undifferentiation and differentiation group. The order of ONT, DMP-1, and OCN did not changed. ALP and DMP-1 were switched in order.
ALP and DMP-1 may be used as important markers for differentiating between the 3rd passage and 10th passage cells.
Considering that supernumerary tooth was extracted young age and the time required to cultured 10th passage was short, supernumerary tooth can be considered a useful donor site of dental pulp stem cells.