BACKGROUND:Prosthesis loosening and wear are still the main problems in the failure of total ankle replacement,which are closely related to the micro-motion of the implant-bone interface,the contact stress of the articular surface and joint motion.The design of artificial joint components,including insert and tibial/talar stem prosthesis,is a key factor affecting the force,motion,and micromotion of the contact interface of the ankle joint.The development of new inserts is of great significance to improve the survival rate of artificial ankle joints. OBJECTIVE:The finite element model of the total ankle replacement model was constructed to detect the biomechanical properties of the porous structure-optimized inserts,and the effect of the porous structure-optimized inserts on reducing prosthesis micromotion and improving the contact behavior of the articular surface was analyzed. METHODS:Based on the CT scan data of the right ankle joint of a healthy adult and the INBONE Ⅱ system product manual,a three-dimensional model including bone and artificial joint system was established,and the total ankle replacement model(model A)was obtained after osteotomy and prosthesis installation,and then through four new types of inserts,G50,G60,D50,and D60,were obtained by transforming the porous structure of the original insert,and the original one was replaced with different inserts to establish an optimized total ankle replacement model(models B-E)corresponding to the inserts.The gait loads were applied on the five models to simulate the gait conditions.The differences in micromotion and articular surface contact behaviors at the implant-bone interface of all five models were compared. RESULTS AND CONCLUSION:(1)In the gait cycle,the micromotion of the prosthesis of the four optimized total ankle replacement models was lower than that of the original model.Compared with model A,the micromotion of the prosthesis in models B-E decreased by 5.4%,10.1%,8.1%,and 20.9%,respectively.The high micromotion area of t ??he tibial groove dome in the optimized model was significantly smaller than that of the original model.(2)The four optimized models obtained a larger articular surface contact area.Compared with model A,the average contact area of t ??he inserts in models B-E increased by 11.8%,14.7%,8.1%,and 32.6%,respectively.(3)Similar to the effect of increasing the contact area,compared with the original model,the contact stress of the optimized model decreased in varying degrees,and the value of model E decreased the most significantly(P<0.05),it is due to good mechanical properties and large porosity of the Diamond lattice that constitutes the D60-type insert.(4)The research results show that the use of porous structure to improve the inserts can improve the elasticity of the inserts and increase its ability to absorb joint impact,for favorable conditions are created for reducing micromotion at the implant-bone interface and improving joint contact behavior.

With the continuous evolution and refinement of the healthcare insurance system,there arises a heightened de-mand for the standardization and efficacy of healthcare insurance management.This paper takes a prominent public hospital in Guangzhou City as a case study to delve into the establishment and enhancement of an intelligent monitoring system for healthcare insurance.Initially,an analysis is conducted from the perspectives of the national,policy,and institutional levels to underscore the imperative and urgency of constructing an intelligent monitoring system for healthcare insurance.Subsequently,a comprehen-sive review of the current research landscape,both domestically and internationally,is presented,highlighting the challenges faced by domestic intelligent auditing systems in terms of their level of intelligence,the sophistication of hospital-level intelligent monitoring,and the standardization of rule libraries.Following this,the paper elaborates on the practical endeavors undertaken by large public hospitals in Guangzhou City regarding the construction and optimization of the intelligent monitoring system for healthcare insurance.This encompasses aspects such as the structure of the intelligent monitoring system,collaborative manage-ment in operational modes,and the standardization of rule libraries.Finally,the paper concludes by summarizing the positive im-pact of these practices on the regulation of medical service behaviors and the enhancement of efficiency in healthcare insurance quality management,while also offering insights into future research directions.

Objective To establish and evaluate a talent training system for hospital information pharmacists based on a competency model,thereby enhancing refined management of pharmaceutical affairs in hospitals and promoting high-quality development of pharmacy services.Methods The current development status of hospital information pharmacists at home and abroad was examined.A competency model for hospital information pharmacist positions was established using methods such as behavioral event interviews.In conjunction with this model,training course outlines addressing knowledge and capability requirements were developed.National skill training classes for hospital information pharmacists were conducted using innovative teaching methods like scenario simulation and case discussion.Training effectiveness was evaluated by tracking participants'work performance and scientific research achievements in the field of pharmaceutical information through questionnaire surveys before and after the training.Results The hospital information pharmacist positions competency model was constructed in four parts:knowledge,experience,skills,and personal traits.Based on this model,a training system for hospital information pharmacists was established,which included setting job responsibilities and performance indicators,establishing a pharmacy information department system,designing a series of training courses and publishing textbooks,founding national training classes,creating a specialized question bank,and developing a digital pharmacy network platform.The project team tracked the work performance and scientific research achievements of participants before and after training,using the national hospital information pharmacist training class hosted by the Guangdong Pharmaceutical Association as an example.From 2018 to 2024,a total of 465 information pharmacists from 298 hospitals across 28 provinces and cities were trained over seven sessions.Questionnaires were sent to participants who had completed at least one year since graduation,and 236 valid responses were received.Of these,169(71.6% )participants reported playing a major role in pharmacy informatization projects after the training,and 65(27.5% )participants published papers,applied for projects,or filed for patents after the training,with the majority related to pharmacy automation and informatization.Conclusion A competency model for hospital information pharmacist positions was constructed and applied nationwide,achieving favorable results.

Objective:As a newly emerging thing, the construction and operation management of research wards are still being explored. According to the previous practice, this study summarized and shared the key points of a demonstration research ward in Beijing, and provided a reference for the development of domestic research wards.Methods:Focusing on improving the efficiency and quality of clinical research, this article summarizes and shares the experience of research ward construction. In addition, this study explores how to maintain the high-quality sustainable development of research wards from the aspects of improving core competence, system construction, and talent training.Results:Professional teams, innovative operation modes, as well as intelligence and informatization could improve the quality of clinical research. Besides, the improvement of core competence, talent training, and policy support ensure sustainable development of research wards.Conclusions:As clinical research platforms, the development paths of research wards need to be clarified further. The standardized construction and sustainable development of research wards can effectively improve clinical research capability and promote the transformation of scientific achievements.

As an important measure starting for hospital management, hospital accreditation can effectively guide hospitals to improve their comprehensive service capabilities and management level. The accreditation results of 38 tertiary general hospitals in Jiangsu province from 2018 to 2020 showed that there were weaknesses existing in the development of hospitals, including the radiosity and influence of tertiary hospitals, patient service mode, construction of medical technology capabilities and disciplines, medical quality and safety, nursing quality management and specialized nursing, and information construction. The author suggested that hospitals should return to functional positioning, improve the service quality, strengthen construction of hospital disciplines and technical projects, consolidate the foundation of quality and safety management, improve the level of information technology construction, for references for promoting the high-quality sustainable development of tertiary general hospitals.

Objective:To investigate the clinical imaging features and prognosis of von Hippel-Lindau (VHL) syndrome associated with pancreatic lesions.Method:The retrospective case-control study was conducted. The clinicopathological data of 161 patients with VHL syndrome who were admitted to Peking University First Hospital from September 2010 to August 2022 were collected. There were 83 males and 78 females, with age of onset as 27.0(range, 8.0-66.0)years. Observation indicators: (1) imaging results of VHL syndrome associated with pancreatic lesions; (2) clinical characteristics of VHL syndrome associated with pancreatic lesions; (3) comparison of clinicopathological factors in patients with VHL syndrome associated with pancreatic cystic lesions; (4) comparison of clinicopathological factors in patients with VHL syndrome associated with pancreatic neuroendocrine neoplasms (pNENs). (5) Treatment and prognosis of patients with VHL syndrome associated with pancreatic lesions. Measurement data with normal distribution were represented as Mean± SD, and comparison between groups was conducted using the independent sample t test. Measurement data with skewed distribution were represented as M(range), and comparison between groups was conducted using the non-parameter test. Count data were described as absolute numbers, and comparison between groups was conducted using the chi-square test. Results:(1) Imaging results of VHL syndrome associated with pancreatic lesions. Of the 161 patients with VHL syndrome, there were 151 patients associated with pancreatic lesions and 10 patients not associated with pancreatic lesions. Of the 151 patients with VHL syndrome associated with pancreatic lesions, there were 136 patient with pancreatic cystic lesions and 34 patients with pNENs, 22 patients with both pNENs and pancreatic cystic lesions, and the type of pancreatic lesions could not be accurately determined in 3 cases. (2) Clinical characteristics of VHL syndrome associated with pancreatic lesions. The age of onset in 151 patients with VHL syndrome associated with pancreatic lesions was 33.0(range, 14.0-68.0)years. Cases with gene site mutation of exon 1, exon 2, exon 3 and other types of gene site was 51, 16, 43 and 41, respectively. There were 116 patients of VHL type 1 and 35 patients of VHL type 2. There were 92 patients with family history of VHL syndrome and 59 patients without family history of VHL syndrome. There were 127 patients combined with renal cell carcinoma, 112 patients combined with central nervous system lesions, 46 patients combined with retinal hemangioblastoma. Patients may combined with multiple lesions. (3) Comparison of clinicopathological factors in patients with VHL syndrome associated with pancreatic cystic lesions. The age of onset, VHL syndrome type (VHL1 type, VHL2 type) and cases combined with renal cell carcinoma were 32.5(range, 14.0-68.0)years, 110, 26 and 115 in 136 patients with VHL syndrome associated with pancreatic cystic lesions, versus 22.0(range, 8.0-64.0)years, 13, 12 and 14 in 25 patients with VHL syndrome not associated with pancreatic cystic lesions, showing significant differences in the above indicators between them ( Z=-3.384, χ2=9.770, 10.815, P<0.05). (4) Comparison of clinicopathological factors in patients with VHL syndrome associated with pNENs. The age of onset, gene mutation sites (exon 1, exon 2, exon 3, other types of gene site) and VHL syndrome type (VHL1 type, VHL2 type) were 33.5(range, 14.0-64.0)years, 12, 5, 14, 3 and 18, 16 in 34 patients with VHL syndrome associated with pNENs, versus 27.0(range, 9.0-66.0)years, 41, 12, 32, 42 and 105, 22 in 127 patients with VHL syndrome not associated with pNENs, showing significant differences in the above indicators between them ( Z=-4.030, χ2=8.814, 13.152, P<0.05). (5) Treatment and prognosis of patients with VHL syndrome associated with pancreatic lesions. Of the 161 patients with VHL syndrome, 3 patients underwent surgical treatment, and the remaining patients were followed up. All 161 patients with VHL syndrome were followed up for 6 (range, 1-12)years, in which 15 patients died and 146 patients alive during the follow-up. The follow-up time of 3 patients undergoing surgical treatment was 4, 14, 9 years, respectively, and all of them were alive. Conclusions:The clinical imaging features of pancreatic lesions related to VHL syndrome are cystic lesions and pNENs, which with the characteristics of multiple lesions and benign tumors. Such patients usually do not requiring surgical treatment and have good prognosis.

Objective:To explore the predictive value of deep learning (DL)-based coronary artery calcification score (CACS) for obstructive coronary artery disease (CAD) and noncalcified plaque/mixed plaque in type 2 diabetes mellitus (T2DM).Methods:Forty hundred and twenty-four consecutive T2DM patients who accepted CACS scan and coronary CT angiography (CCTA) from December 2012 to December 2019 were included retrospectively, with clinical risk factors and plaque features collected. Plaque composition was classified as calcified, non-calcified or mixed plaque. Obstructive CAD was defined as maximum diameter stenosis≥50%. CACS was calculated with a fully automated method based on DL. Univariate and multivariate logistic regressions were applied to select statistically significant factors and the odds ratios(ORs) were measured. Receiver operating characteristic (ROC) curve was evaluated to assess the predictive performance.Results:Increased CACS was associated with a significantly higher odds of obstructive CAD in CCTA (adjusted ORs were 2.22, 6.18 and 16.98 for CACS=1-99, 100-299, 300-999 vs. CACS=0, and P values were 0.009,<0.001,<0.001 respectively). The area under ROC curve (AUC) of CACS to predict obstructive CAD was 0.764. Compared with 0, increased CACS was associated with increased risk of non-calcified/mixed plaque (adjusted ORs were 2.75, 4.76, 5.29 for CACS=1-99, 100-299, 300-999 respectively and P values were 0.001,<0.001,<0.001 respectively). The AUC of CACS to predict non-calcified/mixed plaque was 0.688. It took 1.17 min to perform automated measurement of CACS based on DL in total, which was significantly less than manual measurement of 1.73 min ( P<0.001). Conclusion:DL-based CACS can predict obstructive CAD and non-calcified plaque/mixed plaque in T2DM, which is economical and efficient, and has important value for clinical diagnosis and treatment.

According to understanding of the pathogenesis of acne, scholars have established animal models of acne inflammation, animal models of grafting human skin acne, and natural acne animal models. The acne inflammation model is mainly induced by bacterial infection, chemical drug application, and foreign matter injection. Natural acne animal models include animals that some are sensitivity to hormones and some have clinical symptoms of acne. It is necessary to select appropriate model animals and replicate model methods for the development of acne intervention products with different degrees and mechanisms. At present, there are only human evaluation standards of acne health functions in China, but no animal evaluation standards, which has affected the in-depth study of the pathogenesis of acne as well as the research and development progress of acne products. This article summarizes the conditions for the occurrence of acne, the characteristics of human skin, the bidirectional effect of Cutibacterium acnes on human skin, acne animal models, and commonly used observation and evaluation indicators, providing the reference for studying the pathogenesis of acne, promoting acne treatment and health care, and developing treatment products.

The automatic recognition technology of muscle fatigue has widespread application in the field of kinesiology and rehabilitation medicine. In this paper, we used surface electromyography (sEMG) to study the recognition of leg muscle fatigue during circuit resistance training. The purpose of this study was to solve the problem that the sEMG signals have a lot of noise interference and the recognition accuracy of the existing muscle fatigue recognition model is not high enough. First, we proposed an improved wavelet threshold function denoising algorithm to denoise the sEMG signal. Then, we build a muscle fatigue state recognition model based on long short-term memory (LSTM), and used the Holdout method to evaluate the performance of the model. Finally, the denoising effect of the improved wavelet threshold function denoising method proposed in this paper was compared with the denoising effect of the traditional wavelet threshold denoising method. We compared the performance of the proposed muscle fatigue recognition model with that of particle swarm optimization support vector machine (PSO-SVM) and convolutional neural network (CNN). The results showed that the new wavelet threshold function had better denoising performance than hard and soft threshold functions. The accuracy of LSTM network model in identifying muscle fatigue was 4.89% and 2.47% higher than that of PSO-SVM and CNN, respectively. The sEMG signal denoising method and muscle fatigue recognition model proposed in this paper have important implications for monitoring muscle fatigue during rehabilitation training and exercise.
Electromyography ; Memory, Short-Term ; Muscle Fatigue ; Neural Networks, Computer ; Recognition, Psychology

To solve the problems of small one-time ablation range and easy charring of the tissue around the electrode associated with the tumor radiofrequency ablation needle, based on the multiphysical field coupling analysis software COMSOL, the effects of needle material, the number of sub needles and the bending angle of sub needles on the ablation effect of radiofrequency ablation electrode needle were studied. The results show that compared with titanium alloy and stainless steel, nickel titanium alloy has better radiofrequency energy transmission efficiency and it is the best material for electrode needle. The number of sub needles has a great influence on the average necrosis depth and the maximum necrosis diameter. Under the same conditions, the more the number of sub needles, the larger the volume of coagulation necrosis area. The bending angle of the needle has a great effect on the maximum diameter of the coagulated necrotic area, but has little effect on the average necrotic depth. Under the same other conditions, the coagulation necrosis area formed by ablation increased with the increase of the bending angle of the sub needle. For the three needles with bending angles of 60 °, 90 ° and 120 ° analyzed in this paper, the one with bending angle of 120 ° can obtain the largest coagulation necrosis area. In general, the design of nickel titanium alloy with 120 ° bending 8-pin is the optimal. The average depth of radiofrequency ablation necrosis area is 32.40 mm, and the maximum necrosis diameter is 52.65 mm. The above optimized design parameters can provide guidance for the structure and material design of tumor radiofrequency ablation needle.
Humans ; Needles ; Temperature ; Catheter Ablation/methods* ; Necrosis ; Neoplasms/surgery* ; Alloys